Show failure details in CI and deploy summaries

.gitea/runner/README.md

@@ -5,7 +5,12 @@ Compose, workflow, shell, Python, formatting, YAML, Dockerfile and Kubernetes
 checks appear as separate jobs. Jobs run on `homelab:host`, one at a time; the
 build waits for every check to pass. CI and deploy runs also show a summary with
 the release SHA, image build or reuse results, deploy mode, selected services,
-and image digests. No job images or Kubernetes credentials
+and image digests. Failed runs keep a summary of completed image builds, stage
+results, apply results, and recorded Kubernetes recovery. The final deploy
+summary is in the smoke job; earlier jobs show the state observed at that time.
+Apply success is separate from health and recovery. Update the installed
+workstation controller with `setup-workstation.sh` when no deploy is running.
+No job images or Kubernetes credentials
 are needed on the VPS. Builds use one pinned BuildKit helper container. CI and deploy are separate workflows.
 
 ## Runner installation

.gitea/workflows/ci.yaml

@@ -19,6 +19,7 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Validate Compose files
         shell: bash
         run: |
@@ -47,6 +48,22 @@ jobs:
             exit 1
           fi
           echo "checked ${#files[@]} Compose file(s)"
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Compose
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.source.conclusion == 'failure'
+            && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   workflows:
     name: Workflows
     runs-on: homelab
@@ -54,17 +71,35 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh actionlint shellcheck)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Lint Gitea Actions workflows with actionlint
         shell: bash
         run: |
           set -euo pipefail
           actionlint -config-file .gitea/actionlint.yaml -color .gitea/workflows/*.yaml
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Workflows
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   shell:
     name: Shell
     runs-on: homelab
@@ -72,12 +107,14 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh shellcheck jq)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Lint shell scripts with ShellCheck
         shell: bash
         run: |
@@ -91,6 +128,22 @@ jobs:
           fi
           shellcheck --external-sources --source-path=SCRIPTDIR --severity=style "${scripts[@]}"
           bash .gitea/tests/deploy-validation.sh
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Shell
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   formatting:
     name: Formatting
     runs-on: homelab
@@ -98,12 +151,14 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh prettier)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Check formatting with Prettier
         shell: bash
         run: |
@@ -121,6 +176,22 @@ jobs:
           fi
 
           prettier --check --ignore-unknown "${prettier_files[@]}"
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Formatting
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   python:
     name: Python and tests
     runs-on: homelab
@@ -128,12 +199,14 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh ruff jq)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Lint and format-check Python with Ruff
         shell: bash
         run: |
@@ -141,6 +214,22 @@ jobs:
           ruff check . .gitea/workflows
           ruff format --check . .gitea/workflows
           python3 -m unittest discover -s tests -v
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Python and tests
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   yaml:
     name: YAML
     runs-on: homelab
@@ -148,12 +237,14 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh yamllint)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Lint YAML syntax
         shell: bash
         run: |
@@ -171,6 +262,22 @@ jobs:
           fi
 
           yamllint -c .yamllint "${yaml_files[@]}"
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: YAML
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   dockerfiles:
     name: Dockerfiles
     runs-on: homelab
@@ -178,12 +285,14 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh hadolint)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Lint Dockerfiles
         shell: bash
         run: |
@@ -199,6 +308,22 @@ jobs:
           fi
 
           hadolint -c .hadolint.yaml "${dockerfiles[@]}"
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Dockerfiles
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   kubernetes:
     name: Kubernetes
     runs-on: homelab
@@ -206,12 +331,14 @@ jobs:
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
+        id: source
       - name: Prepare pinned tools
         shell: bash
         run: |
           set -euo pipefail
           tools_dir="$(bash .gitea/workflows/install-ci-tools.sh kubeconform)"
           echo "$tools_dir" >> "$GITHUB_PATH"
+        id: tools
       - name: Validate Kubernetes manifests against JSON schemas
         shell: bash
         run: |
@@ -232,6 +359,22 @@ jobs:
             -ignore-missing-schemas \
             -summary \
             "${manifests[@]}"
+        id: check
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Kubernetes
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.tools.conclusion == 'failure'
+            && 'Tool setup' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi
   build:
     needs:
       - compose
@@ -250,12 +393,14 @@ jobs:
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262
         with:
           fetch-depth: 0
+        id: source
       - name: Build changed images and write release
         env:
           GITEA_TOKEN: ${{ github.token }}
           REGISTRY_USERNAME: ${{ secrets.REGISTRY_USERNAME }}
           REGISTRY_PASSWORD: ${{ secrets.REGISTRY_PASSWORD }}
         run: python3 .gitea/workflows/release.py build
+        id: check
       - name: Store commit release
         uses: actions/upload-artifact@c6a366c94c3e0affe28c06c8df20a878f24da3cf
         with:
@@ -263,3 +408,19 @@ jobs:
           path: release.json
           if-no-files-found: error
           retention-days: 30
+        id: artifact
+      - name: Write the job result
+        if: always()
+        env:
+          SUMMARY_CHECK: Image build and release artifact
+          SUMMARY_RESULT: ${{ job.status }}
+          SUMMARY_FAILED_STEP:
+            ${{ steps.check.conclusion == 'failure' && 'Check or image build' || steps.artifact.conclusion == 'failure'
+            && 'Release artifact upload' || steps.source.conclusion == 'failure' && 'Source checkout' || '' }}
+        shell: bash
+        run: |
+          if [ -f .gitea/workflows/release.py ]; then
+            python3 .gitea/workflows/release.py check-summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## %s\n\n- Result: **%s**\n- Failed step: %s\n' "$SUMMARY_CHECK" "$SUMMARY_RESULT" "$SUMMARY_FAILED_STEP" >>"$GITHUB_STEP_SUMMARY" || true
+          fi

.gitea/workflows/deploy-controller.py

@@ -212,14 +212,17 @@ def execute(run_id):
                 raise ValueError(f'Interrupted deploy {other.name}; run recover first')
         status['state'] = 'running'
         atomic_json(directory / 'status.json', status)
+        phase = 'plan'
         try:
             plan = make_plan(directory)
             print(
                 json.dumps({'selected': plan['selected'], 'helm': plan['helm'], 'manual_removals': plan['removed']}),
                 flush=True,
             )
+            phase = 'doctor'
             if not stage(directory, 'doctor', 600):
                 raise RuntimeError('Preflight failed')
+            phase = 'validate'
             if not stage(directory, 'validate', 1200):
                 raise RuntimeError('Validation failed')
             if json.loads((directory / 'request.json').read_text())['mode'] == 'plan':
@@ -228,6 +231,7 @@ def execute(run_id):
                 atomic_json(directory / 'status.json', status)
                 return
             # Budget includes both rollout checks and rollback waves, plus API overhead.
+            phase = 'Recovery budget'
             count = int(
                 command(
                     'bash',
@@ -239,14 +243,24 @@ def execute(run_id):
             verify_budget = max(600, 2 * math.ceil(count / 4) * 300 + 120)
             if verify_budget > 7200:
                 raise ValueError('More than two hours of recovery required; split this deploy')
+            phase = 'apply-k8s'
             k8s_ok = stage(directory, 'apply-k8s', 2700)
+            phase = 'apply-compose'
             compose_ok = stage(directory, 'apply-compose', 1800) if k8s_ok else False
+            phase = 'verify-k8s'
             verify_ok = stage(directory, 'verify-k8s', verify_budget)
+            phase = 'smoke'
             smoke_ok = stage(directory, 'smoke', 600)
             if not all((k8s_ok, compose_ok, verify_ok, smoke_ok)):
                 raise RuntimeError('Deploy failed; inspect stage logs and recovery report')
+            phase = 'Save the successful baseline'
             finish_success(directory, plan)
         except Exception as error:
+            status = json.loads((directory / 'status.json').read_text())
+            status['failure_stage'] = next(
+                (name for name, result in status['stages'].items() if result.get('result') == 'failure'), phase
+            )
+            atomic_json(directory / 'status.json', status)
             with (directory / 'controller.log').open('a') as stream:
                 stream.write(f'{error}\n')
             recover(directory)
@@ -305,6 +319,52 @@ def summary(run_id):
         f'- Mode: `{request["mode"]}`',
         f'- Refresh third-party images: `{request["refresh_images"]}`',
     ]
+    status = json.loads((directory / 'status.json').read_text())
+    if status.get('failure_stage'):
+        lines.append(f'- Failed stage: **{status["failure_stage"]}**')
+    lines.extend(
+        [
+            '',
+            f'- Observed run state: **{status["state"]}**',
+            '',
+            '### Stage results',
+            '| Stage | Result | Exit code |',
+            '| --- | --- | --- |',
+        ]
+    )
+    for name in ('doctor', 'validate', 'apply-k8s', 'apply-compose', 'verify-k8s', 'smoke'):
+        stage_result = status['stages'].get(name, {})
+        lines.append(f'| {name} | {stage_result.get("result", "not started")} | {stage_result.get("exit_code", "—")} |')
+    lines.extend(['', '### Apply and Helm recovery results'])
+    events_file = directory / 'apply-events.jsonl'
+    events = []
+    if events_file.exists():
+        for line in events_file.read_text().splitlines():
+            try:
+                events.append(json.loads(line))
+            except json.JSONDecodeError:
+                lines.append('- An operation record is incomplete. Check the stage log.')
+    latest = {(event['action'], event['target']): event['result'] for event in events}
+    lines.extend(f'- `{action}` `{target}`: **{result}**' for (action, target), result in latest.items())
+    if not latest:
+        lines.append('- No apply results were recorded.')
+    lines.append('- A completed apply does not confirm health. See verification and smoke results.')
+    lines.extend(['', '### Kubernetes recovery'])
+    pointer = directory / 'snapshot/current'
+    failed = Path(pointer.read_text().strip()) / 'failed-workloads' if pointer.exists() else None
+    if failed and failed.exists():
+        contents = failed.read_text()
+        counts = dict(re.findall(r'^(ROLLED_BACK|UNRECOVERED)=([0-9]+)$', contents, re.MULTILINE))
+        if not contents.strip():
+            lines.append('- No failed workloads were recorded. See the verification result above.')
+        elif counts:
+            lines.append(f'- Workloads restored: **{counts.get("ROLLED_BACK", "unknown")}**')
+            lines.append(f'- Workloads that need manual recovery: **{counts.get("UNRECOVERED", "unknown")}**')
+        else:
+            lines.append('- Rollback has no recorded result yet. Check the verification log.')
+    else:
+        lines.append('- No workload rollback was recorded. This does not confirm health.')
+    lines.append('- Compose requires manual recovery. Use the saved command in the apply log.')
     if not plan_file.exists():
         lines.extend(['', 'Plan was not created. Check the controller log.'])
         print('\n'.join(lines))

.gitea/workflows/deploy-lib.sh

@@ -27,6 +27,15 @@ log() {
   echo "== $* =="
 }
 
+# Store operation results without command output or local configuration values.
+record_apply() {
+  [ -n "${RUN_DIR:-}" ] || return 0
+  jq -cn --arg action "$1" --arg target "$2" --arg result "$3" \
+    '{action: $action, target: $target, result: $result}' >>"$RUN_DIR/apply-events.jsonl" \
+    || echo 'WARNING: cannot record an apply result' >&2
+  return 0
+}
+
 warn() {
   echo "WARNING: $*" >&2
 }
@@ -376,15 +385,19 @@ recover_pending_release() {
         echo "ERROR: no captured Helm revision for $release; manual recovery required"
         return 1
       fi
+      record_apply helm-rollback "$namespace/$release" started
       if ! helm rollback "$release" "$revision" -n "$namespace" --wait --timeout 10m; then
+        record_apply helm-rollback "$namespace/$release" failure
         echo "WARN: helm rollback of $release did not complete"
         return 1
       fi
       status="$(helm_release_status "$release" "$namespace")" || return 1
       if [ "$status" != "deployed" ]; then
+        record_apply helm-rollback "$namespace/$release" failure
         echo "WARN: $release is $status after rollback"
         return 1
       fi
+      record_apply helm-rollback "$namespace/$release" success
       ;;
   esac
   return 0
@@ -448,11 +461,13 @@ upgrade_helm_releases() {
     # --rollback-on-failure (+ --wait) rolls the release back when the upgrade
     # times out or the workloads it touches never become ready, so a bad chart
     # bump is not left half applied. (--atomic was this combo; deprecated.)
+    record_apply helm-upgrade "$namespace/$release" started
     if ! helm upgrade --install "$release" "$chart" \
       --namespace "$namespace" \
       --version "$version" \
       --values "$values" \
       --wait --rollback-on-failure --cleanup-on-fail --timeout 10m; then
+      record_apply helm-upgrade "$namespace/$release" failure
       echo "WARN: upgrade of $release failed, checking release state"
       # --rollback-on-failure already attempted its own rollback; finish the job when that
       # rollback never completed, otherwise the release stays pending-* and
@@ -462,8 +477,10 @@ upgrade_helm_releases() {
       else
         echo "ERROR: upgrade of $release failed (release is back on its previous revision)."
       fi
+      record_apply helm-recovery-state "$namespace/$release" "$(helm_release_status "$release" "$namespace" || echo unknown)"
       return 1
     fi
+    record_apply helm-upgrade "$namespace/$release" success
   done
 }
 
@@ -631,7 +648,12 @@ stage_apply_k8s() {
   if [ "${#ns_files[@]}" -gt 0 ]; then
     log "Applying namespaces (${#ns_files[@]} files)"
     for m in "${ns_files[@]}"; do
-      kubectl apply -f "$m"
+      record_apply kubectl "${m#"$REPO"/}" started
+      if ! kubectl apply -f "$m"; then
+        record_apply kubectl "${m#"$REPO"/}" failure
+        return 1
+      fi
+      record_apply kubectl "${m#"$REPO"/}" success
     done
   fi
   if selected_service k8s prometheus-stack && [ -f "$REPO/prometheus-stack/k8s/active" ]; then
@@ -646,18 +668,24 @@ stage_apply_k8s() {
     log "Applying resources (${#other_files[@]} files, our images pinned to digests)"
     for m in "${other_files[@]}"; do
       log "Applying ${m#"$REPO"/}"
+      record_apply kubectl "${m#"$REPO"/}" started
       if ! render_pinned <"$m" | kubectl apply -f -; then
+        record_apply kubectl "${m#"$REPO"/}" failure
         echo "ERROR: apply failed for ${m#"$REPO"/}" >&2
         exit 1
       fi
+      record_apply kubectl "${m#"$REPO"/}" success
     done
   fi
   for k in ${KUSTOMIZE_APPS[@]+"${KUSTOMIZE_APPS[@]}"}; do
     log "Applying kustomize app: ${k#"$REPO"/} (our images pinned to digests)"
+    record_apply kustomize "${k#"$REPO"/}" started
     if ! kubectl kustomize "$k" | render_pinned | kubectl apply -f -; then
+      record_apply kustomize "${k#"$REPO"/}" failure
       echo "ERROR: apply failed for kustomize app ${k#"$REPO"/}" >&2
       exit 1
     fi
+    record_apply kustomize "${k#"$REPO"/}" success
   done
 
   # No verification here on purpose. This stage may be killed at any point by
@@ -959,7 +987,12 @@ stage_apply_compose() {
   local cf
   for cf in "${COMPOSE_STACKS[@]}"; do
     log "Applying Compose ${cf#"$REPO"/}"
-    compose "$cf" up -d --wait --wait-timeout 180 --pull missing --remove-orphans
+    record_apply compose "${cf#"$REPO"/}" started
+    if ! compose "$cf" up -d --wait --wait-timeout 180 --pull missing --remove-orphans; then
+      record_apply compose "${cf#"$REPO"/}" failure
+      return 1
+    fi
+    record_apply compose "${cf#"$REPO"/}" success
     verify_compose_stack "$cf"
   done
   echo "Compose recovery files: $RUN_DIR/compose-before (manual recovery only)"

.gitea/workflows/deploy.yaml

@@ -64,6 +64,18 @@ jobs:
         run: python3 .gitea/workflows/release.py gate --ref "$DEPLOY_REF" --event-sha "$EVENT_SHA"
       - name: Submit durable deploy to workstation
         run: bash .gitea/workflows/ssh-run.sh start
+      - name: Write the request result
+        if: always()
+        env:
+          REQUEST_RESULT: ${{ job.status }}
+          CHECKED_SHA: ${{ steps.release.outputs.sha }}
+        run: |
+          if [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            printf '## Deploy request\n\n- Result: **%s**\n- Checked commit: `%s`\n- Mode: `%s`\n' "$REQUEST_RESULT" "${CHECKED_SHA:-not checked}" "$DEPLOY_MODE" >>"$GITHUB_STEP_SUMMARY"
+            if [ "$REQUEST_RESULT" != success ]; then
+              echo 'Open the failed step log. If SSH submission failed, check the remote controller state.' >>"$GITHUB_STEP_SUMMARY"
+            fi
+          fi
 
   apply:
     needs: [gate]
@@ -76,6 +88,14 @@ jobs:
           ref: ${{ needs.gate.outputs.sha }}
       - name: Follow validation and sequential Kubernetes / Compose apply
         run: bash .gitea/workflows/ssh-run.sh apply
+      - name: Write the deploy result
+        if: always()
+        run: |
+          if [ -f .gitea/workflows/ssh-run.sh ]; then
+            bash .gitea/workflows/ssh-run.sh summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            echo 'Source checkout failed. The remote deploy state is unknown. Check the job log.' >>"$GITHUB_STEP_SUMMARY"
+          fi
 
   verify:
     needs: [gate, apply]
@@ -89,6 +109,14 @@ jobs:
           ref: ${{ needs.gate.outputs.sha }}
       - name: Follow workload verification and recovery
         run: bash .gitea/workflows/ssh-run.sh verify
+      - name: Write the deploy result
+        if: always()
+        run: |
+          if [ -f .gitea/workflows/ssh-run.sh ]; then
+            bash .gitea/workflows/ssh-run.sh summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            echo 'Source checkout failed. The remote deploy state is unknown. Check the job log.' >>"$GITHUB_STEP_SUMMARY"
+          fi
 
   smoke:
     needs: [gate, verify]
@@ -102,3 +130,11 @@ jobs:
           ref: ${{ needs.gate.outputs.sha }}
       - name: Follow public route checks
         run: bash .gitea/workflows/ssh-run.sh smoke
+      - name: Write the deploy result
+        if: always()
+        run: |
+          if [ -f .gitea/workflows/ssh-run.sh ]; then
+            bash .gitea/workflows/ssh-run.sh summary
+          elif [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
+            echo 'Source checkout failed. The remote deploy state is unknown. Check the job log.' >>"$GITHUB_STEP_SUMMARY"
+          fi

.gitea/workflows/release.py

@@ -163,10 +163,11 @@ def gate(output, requested_ref, event_sha):
     print(f'CI gate accepted {sha}')
 
 
-def build(output):
+def build_images(output, report):
     sha = command('git', 'rev-parse', 'HEAD')
     if sha != os.environ['GITHUB_SHA'] or not SHA.fullmatch(sha):
         raise ValueError('Build checkout does not match GITHUB_SHA')
+    report['phase'] = 'Find a successful CI release'
     api = Gitea()
     previous = None
     for run in sorted(itertools.islice(api.successful_runs(), 50), key=lambda item: item['id'], reverse=True):
@@ -183,6 +184,7 @@ def build(output):
     builder_config.mkdir(parents=True, exist_ok=True)
     env = {**os.environ, 'DOCKER_CONFIG': docker_config, 'BUILDX_CONFIG': str(builder_config)}
     try:
+        report['phase'] = 'Registry login'
         subprocess.run(  # noqa: S603, S607
             [
                 shutil.which('docker') or '/usr/bin/docker',
@@ -197,6 +199,7 @@ def build(output):
             check=True,
             env=env,
         )
+        report['phase'] = 'Prepare the builder'
         builder = 'homelab-ci'
         versions = dict(
             re.findall(r'^([A-Z_]+)="([^"\n]+)"$', Path('.gitea/workflows/tool-versions.env').read_text(), re.MULTILINE)
@@ -231,9 +234,10 @@ def build(output):
             )
             signature.write_text(image + '\n')
         release = {'version': 1, 'sha': sha, 'images': {}, 'inputs': {}}
-        built = []
-        reused = []
+        report['images'] = release['images']
         for name, (context, dockerfile) in IMAGES.items():
+            report['phase'] = f'Build or reuse {name}'
+            report['current'] = name
             image = f'gcr.forust.xyz/forust/{name}'
             inputs = fingerprint(context, dockerfile)
             old_digest = (previous or {}).get('images', {}).get(image)
@@ -257,10 +261,9 @@ def build(output):
             if exists:
                 print(f'Reuse {name}: inputs unchanged')
                 digest = old_digest
-                reused.append((name, image, digest))
+                report['reused'].append(name)
             else:
                 print(f'Build {name}', flush=True)
-                built.append((name, image))
                 metadata = Path(docker_config) / 'metadata.json'
                 command(
                     'docker',
@@ -286,27 +289,13 @@ def build(output):
                     env=env,
                 )
                 digest = json.loads(metadata.read_text())['containerimage.digest']
+                report['built'].append(name)
             release['images'][image] = digest
             release['inputs'][image] = inputs
         validate_release(release, sha)
         output.write_text(json.dumps(release, indent=2) + '\n')
-        summary = os.environ.get('GITHUB_STEP_SUMMARY')
-        if summary:
-            lines = [f'## Image release for `{sha}`', '', '### Built']
-            lines.extend(f'- `{name}` — `{image}`' for name, image in built)
-            if not built:
-                lines.append('- None')
-            lines.extend(['', '### Reused from successful CI'])
-            lines.extend(f'- `{name}` — `{image}@{digest}`' for name, image, digest in reused)
-            if not reused:
-                lines.append('- None')
-            lines.extend(['', '### Release digests'])
-            lines.extend(
-                f'- `{name}` — `{image}@{release["images"][image]}`'
-                for name in IMAGES
-                for image in [f'gcr.forust.xyz/forust/{name}']
-            )
-            Path(summary).write_text('\n'.join(lines) + '\n')
+        report['current'] = None
+        report['phase'] = 'Release file saved'
     finally:
         # Cleanup errors must neither leak credentials nor mask the original build error.
         try:
@@ -330,6 +319,59 @@ def build(output):
             shutil.rmtree(docker_config)
 
 
+def write_summary(lines):
+    path = os.environ.get('GITHUB_STEP_SUMMARY')
+    if path:
+        try:
+            with Path(path).open('a') as stream:
+                stream.write('\n'.join(lines) + '\n\n')
+        except OSError:
+            print('WARNING: cannot write the job summary')
+
+
+def check_summary():
+    lines = [
+        f'## {os.environ["SUMMARY_CHECK"]}',
+        '',
+        f'- Commit: `{os.environ.get("GITHUB_SHA", "unknown")}`',
+        f'- Result: **{os.environ["SUMMARY_RESULT"]}**',
+    ]
+    if os.environ.get('SUMMARY_FAILED_STEP'):
+        lines.append(f'- Failed step: {os.environ["SUMMARY_FAILED_STEP"]}')
+    if os.environ['SUMMARY_RESULT'] != 'success':
+        lines.append('- Open the failed step log for the error details.')
+    write_summary(lines)
+
+
+def build(output):
+    report = {'phase': 'Check the source commit', 'current': None, 'built': [], 'reused': [], 'images': {}}
+    result = 'failure'
+    try:
+        build_images(output, report)
+        result = 'success'
+    finally:
+        lines = [
+            f'## Image release `{os.environ.get("GITHUB_SHA", "unknown")}`',
+            '',
+            f'- Result: **{result}**',
+            f'- Last stage: {report["phase"]}',
+        ]
+        if result == 'failure':
+            lines.append('- No release from this build can be deployed. Open the failed step log.')
+        if report['current']:
+            lines.append(f'- Image at the failure: `{report["current"]}`')
+        for title, key in (('Built', 'built'), ('Reused from successful CI', 'reused')):
+            lines.extend(['', f'### {title}'])
+            lines.extend(f'- `{name}`' for name in report[key])
+            if not report[key]:
+                lines.append('- None')
+        lines.extend(['', '### Completed image digests'])
+        lines.extend(f'- `{image}@{digest}`' for image, digest in report['images'].items())
+        if not report['images']:
+            lines.append('- None')
+        write_summary(lines)
+
+
 def render(stream, destination):
     release = validate_release(json.loads(Path(os.environ['RELEASE_FILE']).read_text()), os.environ['DEPLOY_SHA'])
     image_line = re.compile(
@@ -354,12 +396,14 @@ def render(stream, destination):
 
 def main():
     parser = argparse.ArgumentParser(description=__doc__)
-    parser.add_argument('action', choices=('build', 'gate', 'render'))
+    parser.add_argument('action', choices=('build', 'gate', 'render', 'check-summary'))
     parser.add_argument('--output', type=Path, default=Path('release.json'))
     parser.add_argument('--ref', default='main')
     parser.add_argument('--event-sha', default='')
     args = parser.parse_args()
-    if args.action == 'render':
+    if args.action == 'check-summary':
+        check_summary()
+    elif args.action == 'render':
         render(sys.stdin, sys.stdout)
     elif args.action == 'gate':
         gate(args.output, args.ref, args.event_sha)

.gitea/workflows/ssh-run.sh

@@ -20,7 +20,7 @@ ssh_opts=(-i "$key_dir/key" -p "${DEPLOY_PORT:-22}" -o BatchMode=yes -o StrictHo
   -o "UserKnownHostsFile=$key_dir/known_hosts" -o ConnectTimeout=15
   -o ServerAliveInterval=15 -o ServerAliveCountMax=4)
 controller=.local/lib/homelab-deploy/controller.py
-case "${1:?start, apply, verify or smoke required}" in
+case "${1:?start, apply, verify, smoke or summary required}" in
   start)
     python3 - <<'PY' >"$key_dir/request.json"
 import json
@@ -40,41 +40,31 @@ PY
     done
     exit "$rc"
     ;;
-  apply)
+  apply|verify|smoke)
     result=0
     for attempt in 1 2 3; do
       rc=0
       # shellcheck disable=SC2029 # The run ID and operation are validated local arguments, not remote variables.
-      ssh "${ssh_opts[@]}" "$DEPLOY_USER@$DEPLOY_HOST" python3 "$controller" follow "$DEPLOY_RUN_ID" apply || rc=$?
+      ssh "${ssh_opts[@]}" "$DEPLOY_USER@$DEPLOY_HOST" python3 "$controller" follow "$DEPLOY_RUN_ID" "$1" || rc=$?
       [ "$rc" -eq 0 ] && break
       [ "$rc" -eq 255 ] || { result="$rc"; break; }
       echo "SSH disconnected; reconnecting to the existing deploy ($attempt/3)"
       if [ "$attempt" -eq 3 ]; then result=255; break; fi
       sleep 5
     done
+    exit "$result"
+    ;;
+  summary)
     if [ -n "${GITHUB_STEP_SUMMARY:-}" ]; then
       rc=0
       # shellcheck disable=SC2029 # The run ID is validated above.
       ssh "${ssh_opts[@]}" "$DEPLOY_USER@$DEPLOY_HOST" python3 "$controller" summary "$DEPLOY_RUN_ID" >"$key_dir/deploy-summary.md" || rc=$?
       if [ "$rc" -eq 0 ]; then
-        cat "$key_dir/deploy-summary.md" >>"$GITHUB_STEP_SUMMARY"
+        cat "$key_dir/deploy-summary.md" >>"$GITHUB_STEP_SUMMARY" || echo "WARNING: cannot write the deploy summary"
       else
-        echo 'Deploy summary is unavailable. Check the controller log.' >>"$GITHUB_STEP_SUMMARY"
+        echo 'Deploy summary is unavailable. The SSH connection failed or the controller did not respond. Check the job log.' >>"$GITHUB_STEP_SUMMARY" || true
       fi
     fi
-    exit "$result"
-    ;;
-  verify|smoke)
-    for attempt in 1 2 3; do
-      rc=0
-      # shellcheck disable=SC2029 # The run ID and operation are validated local arguments, not remote variables.
-      ssh "${ssh_opts[@]}" "$DEPLOY_USER@$DEPLOY_HOST" python3 "$controller" follow "$DEPLOY_RUN_ID" "$1" || rc=$?
-      [ "$rc" -eq 0 ] && exit 0
-      [ "$rc" -eq 255 ] || exit "$rc"
-      echo "SSH disconnected; reconnecting to the existing deploy ($attempt/3)"
-      sleep 5
-    done
-    exit "$rc"
     ;;
   *) echo "Unknown SSH operation: $1" >&2; exit 1 ;;
 esac

tests/test_cicd_lifecycle.py

@@ -213,6 +213,64 @@ class DurableRunTests(unittest.TestCase):
             self.assertEqual(json.loads((directory / 'status.json').read_text())['state'], 'failure')
 
 
+class FailureSummaryTests(unittest.TestCase):
+    def test_build_failure_keeps_progress_and_does_not_expose_exception_text(self):
+        with tempfile.TemporaryDirectory() as scratch:
+            summary = Path(scratch) / 'summary.md'
+
+            def failed_build(_output, report):
+                report.update(phase='Build or reuse xdfnx-homepage', current='xdfnx-homepage', built=['error-pages'])
+                report['images']['gcr.forust.xyz/forust/error-pages'] = 'sha256:' + 'b' * 64
+                raise RuntimeError('private value must not appear in the summary')
+
+            with (
+                patch.dict(os.environ, {'GITHUB_STEP_SUMMARY': str(summary), 'GITHUB_SHA': 'a' * 40}),
+                patch.object(release_module, 'build_images', side_effect=failed_build),
+                self.assertRaises(RuntimeError),
+            ):
+                release_module.build(Path(scratch) / 'release.json')
+            content = summary.read_text()
+            self.assertIn('**failure**', content)
+            self.assertIn('error-pages', content)
+            self.assertIn('xdfnx-homepage', content)
+            self.assertNotIn('private value', content)
+
+    def test_deploy_failure_reports_completed_apply_and_rollback_result(self):
+        with tempfile.TemporaryDirectory() as scratch:
+            state = Path(scratch)
+            directory = state / 'runs/123-1'
+            snapshot = directory / 'snapshot/before'
+            snapshot.mkdir(parents=True)
+            (directory / 'snapshot/current').write_text(str(snapshot))
+            (snapshot / 'failed-workloads').write_text('deployment app api\nROLLED_BACK=1\nUNRECOVERED=0\n')
+            controller.atomic_json(
+                directory / 'request.json', {'release': release(), 'mode': 'changed', 'refresh_images': False}
+            )
+            controller.atomic_json(
+                directory / 'status.json',
+                {
+                    'state': 'failure',
+                    'stages': {
+                        'apply-k8s': {'result': 'success', 'exit_code': 0},
+                        'verify-k8s': {'result': 'failure', 'exit_code': 1},
+                    },
+                },
+            )
+            controller.atomic_json(directory / 'plan.json', {'selected': {'k8s': ['app'], 'compose': []}})
+            (directory / 'apply-events.jsonl').write_text(
+                json.dumps({'action': 'kubectl', 'target': 'app/k8s/api.yaml', 'result': 'success'}) + '\n'
+            )
+            output = io.StringIO()
+            with patch.object(controller, 'STATE', state), patch('sys.stdout', output):
+                controller.summary('123-1')
+            content = output.getvalue()
+            self.assertIn('verify-k8s | failure | 1', content)
+            self.assertIn('app/k8s/api.yaml', content)
+            self.assertIn('Workloads restored: **1**', content)
+            self.assertIn('manual recovery: **0**', content)
+            self.assertIn('Compose requires manual recovery', content)
+
+
 class InstallerTests(unittest.TestCase):
     def test_version_comparison_is_exact_without_network_or_host_packages(self):
         with tempfile.TemporaryDirectory() as scratch: