chore(deps): update container patch updates

Every bouncer-protected request blocks on a synchronous
GET /v1/decisions against the LAPI, and the plugin fails CLOSED with 403
when that lookup exceeds its timeout. The LAPI was capped at 400m/500Mi
on a single replica, so idle lookups measured 1.3-7.4s and a deploy
burst pushed them past the fork's implicit 10s default: gitea answered
403 for ten seconds straight, and containerd turned those 403s on
gcr.forust.xyz into ErrImagePull/ImagePullBackOff on freshly rolled
pods.

Three changes, plus the 403 feedback loop that made it sticky:

* gitea/k8s/ingress.yaml - drop the bouncer from the /v2 registry route.
  A deploy fires hundreds of parallel authenticated OCI requests
  (runner Action API, manifest inspect per own image, containerd pulls,
  smoke probes) and scanners gain nothing from a registry that already
  does its own token auth. The web UI route keeps the bouncer.
* crowdsec-values.yaml - LAPI to 1500m/1Gi. Replicas stay at 1 on
  purpose: LAPI is stateful (BoltDB plus credentials on two RWO PVCs),
  so a second replica would corrupt the decision store.
* crowdsec-middleware.yaml - CrowdsecLapiTimeout: 2s instead of the
  implicit 10s, so a slow LAPI costs a fast 403 rather than a 10s hang.

LePresidente/http-generic-403-bf then banned us for our own 403s: five
POSTs answered 403 within 10s earn a 4h ban, and the hairpin-NAT
address 192.168.88.1 that the Gitea Actions runner presents to Traefik
is not covered by the home-dynamic-IP whitelist. That scenario cannot
be dropped per-scenario - it is baked into the hub item
crowdsecurity/http-generic-bf v0.9, and disabling the whole
base-http-scenarios collection would cost ~40 useful detections. So the
janitor now deletes its decisions hourly and a new forust/lan
whitelist postoverflow covers 192.168.88.0/24. First janitor run
removed 165 decisions; none of the remaining ones are local.

Measured after: gitea 200 in 25-148ms (was 403 at 10001ms), a 60-way
parallel burst all 200 with a 422ms max, gcr /v2 back to its 401 auth
challenge, LAPI at 60m CPU with no throttling.

.gitea/actionlint.yaml

@@ -0,0 +1,10 @@
+# actionlint configuration. Passed explicitly from the ci workflow:
+#   actionlint -config-file .gitea/actionlint.yaml .gitea/workflows/*.yaml
+#
+# The self-hosted act_runner registers custom labels that actionlint cannot know
+# about, so declare them here instead of silencing the whole runner-label check.
+self-hosted-runner:
+  labels:
+    - arch
+    - homelab
+    - prod

.gitea/workflows/ci.yaml

@@ -7,6 +7,12 @@ on:
   pull_request:
   workflow_dispatch:
 
+# Every job here is checkout plus local tools. The token needs to read the tree
+# and nothing else, and saying so keeps a future step that reaches for the API
+# from quietly holding a token that can write to the repository.
+permissions:
+  contents: read
+
 concurrency:
   group: ci-${{ github.ref }}
   cancel-in-progress: ${{ github.ref != 'refs/heads/main' }}
@@ -15,8 +21,90 @@ env:
   REGISTRY: gcr.forust.xyz
 
 jobs:
+  lint-compose:
+    runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      # Structure check for every committed Compose file, active or not.
+      # Interpolation, env-file and bind-mount resolution are all switched off,
+      # because inactive stacks have no .env here and would only fail on their
+      # ${VAR:?} guards. Active stacks get the full check with interpolation in
+      # the deploy workflow, where the real .env files live.
+      - name: Validate Compose files
+        shell: bash
+        run: |
+          set -euo pipefail
+          source .gitea/workflows/compose-lint.sh
+
+          mapfile -t safe_flags < <(compose_safe_flags)
+          echo "docker compose config ${safe_flags[*]-}"
+
+          mapfile -t files < <(compose_files)
+          if [ "${#files[@]}" -eq 0 ]; then
+            echo "No Compose files found."
+            exit 0
+          fi
+
+          failed=0
+          for f in "${files[@]}"; do
+            if ! out="$(validate_compose_file "$f" ${safe_flags[@]+"${safe_flags[@]}"} 2>&1)"; then
+              failed=1
+              echo "::error file=${f}::$(printf '%s' "$out" | head -1)"
+            fi
+          done
+
+          if [ "$failed" -ne 0 ]; then
+            echo "Compose validation failed."
+            exit 1
+          fi
+          echo "checked ${#files[@]} Compose file(s)"
+
+  lint-actionlint:
+    runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      - name: Lint Gitea Actions workflows with actionlint
+        shell: bash
+        run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh actionlint)"
+          export PATH="$tools_dir:$PATH"
+          actionlint -config-file .gitea/actionlint.yaml -color .gitea/workflows/*.yaml
+
+  lint-shellcheck:
+    runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      - name: Lint shell scripts with ShellCheck
+        shell: bash
+        run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh shellcheck)"
+          export PATH="$tools_dir:$PATH"
+          # userbot/ is a git subtree synced from forust/userbot, so its shell
+          # scripts are upstream's to maintain, not ours. Linting them would let a
+          # routine subtree pull turn the deploy gate red on code we do not own.
+          mapfile -t scripts < <(
+            git ls-files '*.sh' ':(glob)**/*.bash' ':!userbot/**'
+          )
+          if [ "${#scripts[@]}" -eq 0 ]; then
+            echo "No shell scripts found."
+            exit 0
+          fi
+          shellcheck --external-sources --source-path=SCRIPTDIR --severity=style "${scripts[@]}"
+
   lint-prettier:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -24,6 +112,10 @@ jobs:
       - name: Check formatting with Prettier
         shell: bash
         run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh prettier)"
+          export PATH="$tools_dir:$PATH"
+
           mapfile -t prettier_files < <(
             git ls-files \
               | grep -E '\.(md|json|ya?ml|html|css)$' \
@@ -39,17 +131,23 @@ jobs:
 
   lint-ruff:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
 
-      - name: Lint Python with Ruff
+      - name: Lint and format-check Python with Ruff
         shell: bash
         run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh ruff)"
+          export PATH="$tools_dir:$PATH"
           ruff check .
+          ruff format --check .
 
   lint-yaml:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -57,6 +155,10 @@ jobs:
       - name: Lint YAML syntax
         shell: bash
         run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh yamllint)"
+          export PATH="$tools_dir:$PATH"
+
           mapfile -t yaml_files < <(
             git ls-files '*.yaml' '*.yml' \
               ':!node_modules/**' \
@@ -72,6 +174,7 @@ jobs:
 
   lint-dockerfiles:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 10
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -79,6 +182,10 @@ jobs:
       - name: Lint Dockerfiles
         shell: bash
         run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh hadolint)"
+          export PATH="$tools_dir:$PATH"
+
           mapfile -t dockerfiles < <(
             git ls-files ':(glob)**/Dockerfile' ':(glob)**/Dockerfile.*'
           )
@@ -90,15 +197,169 @@ jobs:
 
           hadolint -c .hadolint.yaml "${dockerfiles[@]}"
 
-  validate:
+  # Known, accepted, and recorded. Each line is a real advisory against a
+  # package we build into the panel image, kept in this workflow rather than in
+  # the package manifest so that a subtree sync from forust/userbot cannot
+  # silently widen the exemption.
+  #
+  # starlette is the reason this job is not simply "fail on everything":
+  # fastapi 0.115.12 pins `starlette<0.47.0`, and the fixes for the last four
+  # below need 0.49.1 through 1.3.1, so clearing them means a jump from fastapi
+  # 0.115.12 to 0.141.x. That is upstream's call, not a drive-by in a lint
+  # commit. Of the seven, four are reachable here in principle: 1942 is a
+  # crafted Range header hitting FileResponse, and the panel serves its built
+  # SPA through exactly that; 249 is request.form() ignoring max_fields for
+  # x-www-form-urlencoded, which is the login form; 1941 is a large multipart
+  # body blocking the event loop; 161 and 248 are unvalidated Host and request
+  # path reaching request.url. 2280 needs HTTPEndpoint, which the panel does
+  # not use, and 2281 is Windows-only, and this deploys on Linux.
+  #
+  # The panel answers on userbot.workstation.internal and has no public
+  # forust.xyz route, which is what keeps the four reachable ones from being
+  # an internet-facing DoS. It still manages Telegram credentials.
+  #
+  # Deleting an entry here is how you accept a new advisory, so the diff says
+  # so out loud.
+  scan-deps:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 15
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
 
-      - name: Validate Kubernetes manifests
+      - name: Audit the Python dependencies that ship in the image
         shell: bash
         run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh pip-audit)"
+          export PATH="$tools_dir:$PATH"
+          # requirements.txt, not requirements-dev.txt: this is what the image
+          # installs, and the test tooling is not a shipped attack surface.
+          pip-audit -r userbot/panel/backend/requirements.txt --strict \
+            --ignore-vuln CVE-2025-67720 \
+            --ignore-vuln PYSEC-2026-161 \
+            --ignore-vuln PYSEC-2026-1941 \
+            --ignore-vuln PYSEC-2026-1942 \
+            --ignore-vuln PYSEC-2026-2280 \
+            --ignore-vuln PYSEC-2026-2281 \
+            --ignore-vuln PYSEC-2026-248 \
+            --ignore-vuln PYSEC-2026-249
+
+      # devDependencies are excluded on purpose. `npm audit` on the full tree
+      # reports 7 findings, and every one of them is a build- or test-time
+      # package: the esbuild CORS advisory needs a vite dev server serving to
+      # the internet, and nanoid's infinite loop needs a custom generator
+      # called with size 0, which postcss does not do. None of them are in the
+      # 91 kB bundle the panel serves. The one production finding, devalue
+      # via svelte, is moderate, which is where --audit-level draws the line;
+      # this fails on the next high or critical one.
+      - name: Audit the production npm dependencies
+        shell: bash
+        run: |
+          set -euo pipefail
+          # The pinned node, not whatever the runner has. Its system node is a
+          # rolling Arch package: during this very push its npm was missing
+          # entirely, and an hour later it was npm 12 on node 26. Both are the
+          # wrong major anyway — the panel image is node:22-alpine.
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh node)"
+          export PATH="$tools_dir:$PATH"
+          cd userbot/panel/frontend
+          npm ci
+          npm audit --omit=dev --audit-level=high
+
+  test-backend:
+    runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 15
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      # 25 tests over the panel's pydantic models, its auth flow, the SPA
+      # fallback and the Kubernetes client it shells out with. They existed and
+      # had never been executed by anything.
+      #
+      # Note that userbot/ is a subtree synced from forust/userbot, so a routine
+      # sync can turn this red on upstream's code. Unlike the shellcheck job,
+      # which skips that tree because style disagreements there are ours to
+      # lose, a failing test here is a real defect in a service we deploy.
+      - name: Run the panel backend test suite
+        shell: bash
+        run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh uv)"
+          export PATH="$tools_dir:$PATH"
+
+          # A venv in a temp dir rather than a checked-out one: the runner is
+          # shared, and a leftover .venv would let a dependency the
+          # requirements no longer pin still satisfy an import.
+          #
+          # --python is not optional. uv otherwise takes whatever interpreter it
+          # finds first, and which one that is depends on the machine: this
+          # runner runs jobs on the host, where the only interpreter is 3.14,
+          # and pyrogram's sync.py calls the bare asyncio.get_event_loop() that
+          # 3.14 no longer auto-creates, so three tests fail at collection. The
+          # image is python:3.13-slim, so 3.13 is also the version worth
+          # testing: uv fetches a managed build of it when the host has none,
+          # which is what makes this job independent of the runner.
+          venv="$(mktemp -d)/venv"
+          uv venv --python 3.13 --quiet "$venv"
+          uv pip install --quiet --python "$venv/bin/python" \
+            -r userbot/panel/backend/requirements-dev.txt
+
+          # `python -m`, not bare `pytest`: the tests import `app.*` relative to
+          # the backend directory, which only works if the cwd is on sys.path,
+          # and only `python -m` puts it there.
+          cd userbot/panel/backend
+          "$venv/bin/python" -m pytest tests/ -q
+
+  test-frontend:
+    runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 15
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      # One `npm ci` for both checks below: it is by far the slowest part of
+      # this job, and a second one would learn nothing the first did not.
+      #
+      # `npm ci`, not `npm install`, for the same reason the Dockerfile uses it:
+      # the lockfile is what makes the tree that gets checked the tree that
+      # gets shipped.
+      - name: Type-check and test the panel frontend
+        shell: bash
+        run: |
+          set -euo pipefail
+          # The pinned node, not whatever the runner has. Its system node is a
+          # rolling Arch package: during this very push its npm was missing
+          # entirely, and an hour later it was npm 12 on node 26. Both are the
+          # wrong major anyway — the panel image is node:22-alpine.
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh node)"
+          export PATH="$tools_dir:$PATH"
+          cd userbot/panel/frontend
+          npm ci
+
+          # svelte-check has been a devDependency all along with no script
+          # pointing at it, so the type errors it reports had nowhere to
+          # surface. It is clean today, which is the only reason it can be a
+          # gate: it stops at whatever upstream introduces rather than
+          # reporting a backlog we inherited.
+          npm run check
+          npm test
+
+  validate:
+    runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 20
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      - name: Validate Kubernetes manifests against JSON schemas
+        shell: bash
+        run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh kubeconform)"
+          export PATH="$tools_dir:$PATH"
+
           mapfile -t manifests < <(
             git ls-files ':(glob)**/k8s/**/*.yaml' ':(glob)**/k8s/**/*.yml' \
               | grep -Ev '(^|/)(kustomization\.ya?ml|.*\.example\.ya?ml|.*values\.ya?ml|patch-.*\.ya?ml)$'
@@ -115,10 +376,98 @@ jobs:
             -summary \
             "${manifests[@]}"
 
+      # kubeconform has no schemas for CRDs, so every IngressRoute, Certificate,
+      # PrometheusRule, Middleware, ServersTransport and ServiceMonitor is silently
+      # skipped above. The live API server knows the real CRD schemas (and runs the
+      # cert-manager / Traefik admission webhooks), so validate there too.
+      #
+      # Only services marked with a k8s/active marker are checked: server-side
+      # dry-run needs the target namespace to exist, and inactive services are not
+      # deployed. Services being enabled for the first time are still covered by
+      # the JSON-schema pass above.
+      #
+      # Main pushes only. `--dry-run=server` persists nothing, but it does execute
+      # the admission webhooks of the production API server, so anyone able to open
+      # a pull request would be able to run arbitrary manifest content through
+      # cert-manager and Traefik. A pull request has nothing to gain from it either:
+      # only main is ever deployed, and this job runs to completion before the
+      # deploy workflow is allowed to start, so a bad CRD is still caught before
+      # anything reaches the cluster -- just on the push rather than on the PR.
+      - name: Note the server-side check is not running here
+        if: github.event_name == 'pull_request' || github.ref != 'refs/heads/main'
+        shell: bash
+        run: |
+          echo "::notice::Skipping the server-side dry-run. It executes the cert-manager and" \
+            "Traefik admission webhooks against the production API server, so it is limited" \
+            "to pushes to main. CRDs are still schema-checked by kubeconform above, and the" \
+            "server-side pass still runs on main before the deploy."
+
+      - name: Validate active manifests against the live API server
+        if: github.event_name != 'pull_request' && github.ref == 'refs/heads/main'
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          if ! kubectl get --raw='/readyz' --request-timeout=10s >/dev/null 2>&1; then
+            echo "::warning::Cluster unreachable — skipped server-side validation of CRDs (IngressRoute, Certificate, PrometheusRule). Review manifest changes manually."
+            exit 0
+          fi
+
+          mapfile -t k8s_dirs < <(
+            git ls-files '*.yaml' '*.yml' \
+              | grep -E '(^|/)k8s/' \
+              | sed -E 's#((^|.*/)k8s)/.*#\1#' \
+              | sort -u
+          )
+
+          manifests=()
+          kustomize_apps=()
+          for dir in "${k8s_dirs[@]}"; do
+            if [ ! -f "${dir}/active" ]; then
+              echo "skip (no k8s/active): ${dir}"
+              continue
+            fi
+            if [ -f "${dir}/overlays/prod/kustomization.yaml" ]; then
+              kustomize_apps+=("${dir}/overlays/prod")
+            elif [ -f "${dir}/base/kustomization.yaml" ]; then
+              kustomize_apps+=("${dir}/base")
+            else
+              while IFS= read -r f; do
+                [ -n "$f" ] && manifests+=("$f")
+              done < <(
+                git ls-files "${dir}/*.yaml" "${dir}/*.yml" \
+                  | grep -Ev '(^|/)(kustomization\.ya?ml|.*\.example\.ya?ml|.*values\.ya?ml|patch-.*\.ya?ml)$'
+              )
+            fi
+          done
+
+          echo "server-side dry-run: ${#manifests[@]} manifests, ${#kustomize_apps[@]} kustomize apps"
+          failed=0
+          for m in ${manifests[@]+"${manifests[@]}"}; do
+            if ! out="$(kubectl apply --dry-run=server -f "$m" 2>&1)"; then
+              failed=1
+              echo "::error file=${m}::$(printf '%s' "$out" | head -1)"
+            fi
+          done
+          for k in ${kustomize_apps[@]+"${kustomize_apps[@]}"}; do
+            if ! out="$(kubectl apply -k "$k" --dry-run=server 2>&1)"; then
+              failed=1
+              echo "::error file=${k}::$(printf '%s' "$out" | head -1)"
+            fi
+          done
+
+          if [ "$failed" -ne 0 ]; then
+            echo "Server-side validation failed. The API server (or an admission webhook) rejected these manifests."
+            exit 1
+          fi
+          echo "server-side dry-run: all active manifests accepted by the API server"
+
   build:
-    needs: [lint-prettier, lint-ruff, lint-yaml, lint-dockerfiles, validate]
+    needs:
+      [lint-actionlint, lint-shellcheck, lint-compose, lint-prettier, lint-ruff, lint-yaml, lint-dockerfiles, validate]
     if: github.event_name != 'pull_request' && (github.ref_name == 'main' || github.ref_name == 'dev')
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 60
     outputs:
       services: ${{ steps.services.outputs.services }}
     steps:
@@ -201,7 +550,7 @@ jobs:
             case "$service" in
               dtek_notif)
                 image="${REGISTRY}/forust/dtek-notif"
-                tags=("latest")
+                tags=()
                 case "${GITHUB_REF_NAME}" in
                   main)
                     tags+=("main" "prod")
@@ -224,7 +573,7 @@ jobs:
                 ;;
               errorpages)
                 image="${REGISTRY}/forust/error-pages"
-                tags=("latest")
+                tags=()
                 case "${GITHUB_REF_NAME}" in
                   main)
                     tags+=("main" "prod")
@@ -246,7 +595,7 @@ jobs:
                 done
                 ;;
               userbot)
-                tags=("latest")
+                tags=()
                 case "${GITHUB_REF_NAME}" in
                   main)
                     tags+=("main" "prod")
@@ -280,8 +629,8 @@ jobs:
                 done
                 ;;
               homepages)
-                for service in forust xdfnx; do
+                for variant in forust xdfnx; do
-                  case "$service" in
+                  case "$variant" in
                     forust)
                       image="${REGISTRY}/forust/forust-homepage"
                       ;;
@@ -289,7 +638,7 @@ jobs:
                       image="${REGISTRY}/forust/xdfnx-homepage"
                       ;;
                   esac
-                  tags=("latest")
+                  tags=()
                   case "${GITHUB_REF_NAME}" in
                     main)
                       tags+=("main" "prod")
@@ -305,15 +654,15 @@ jobs:
                   docker build \
                     --cache-from "type=registry,ref=${image}:buildcache" \
                     --cache-to "type=registry,ref=${image}:buildcache,mode=max" \
-                    "${build_args[@]}" -f "homepages/Dockerfile.${service}" homepages
+                    "${build_args[@]}" -f "homepages/Dockerfile.${variant}" homepages
                   for tag in "${tags[@]}"; do
                     docker push "${image}:${tag}"
                   done
                 done
                 ;;
               edu_master)
-                for service in session-keeper webinar-checker; do
+                for variant in session-keeper webinar-checker; do
-                  case "$service" in
+                  case "$variant" in
                     session-keeper)
                       context="edu_master/phpsessid-bot"
                       image="${REGISTRY}/forust/session-keeper"
@@ -323,7 +672,7 @@ jobs:
                       image="${REGISTRY}/forust/webinar-checker"
                       ;;
                   esac
-                  tags=("latest")
+                  tags=()
                   case "${GITHUB_REF_NAME}" in
                     main)
                       tags+=("main" "prod")

.gitea/workflows/compose-lint.sh

@@ -0,0 +1,46 @@
+#!/usr/bin/env bash
+# Shared helpers for validating Compose files. Sourced both by steps in
+# .gitea/workflows/ci.yaml and by deploy-lib.sh on the workstation.
+#
+# Two levels of checking, matching how the repo is structured:
+#
+#   general  every committed Compose file, active or not. Pure structure check:
+#            no ${VAR} interpolation, no .env lookup, no bind-mount path
+#            resolution. Disabled stacks deliberately have no .env in the repo
+#            and no values on the CI runner, so a full `config` run would fail on
+#            their `${VAR:?}` guards for reasons that have nothing to do with the
+#            change under review.
+#
+#   full     active stacks only, with interpolation and env-file resolution, so
+#            required variables and referenced files are actually resolved. Needs
+#            the gitignored .env files, so this only runs in the deploy workflow
+#            on the workstation.
+#
+# This file is meant to be sourced, not executed.
+
+# All committed Compose files, including the ones deploy never starts.
+compose_files() {
+  git ls-files \
+    '*/compose.yaml' '*/compose.yml' 'compose.yaml' 'compose.yml' \
+    '*/docker-compose.yaml' '*/docker-compose.yml'
+}
+
+# Prints the flags that turn `docker compose config` into the general check.
+# Probed rather than hardcoded so an older Compose without --no-env-resolution
+# still gets the flags it does support.
+compose_safe_flags() {
+  local help flag
+  help="$(docker compose config --help 2>/dev/null || true)"
+  for flag in --no-interpolate --no-env-resolution --no-path-resolution; do
+    if printf '%s' "$help" | grep -q -- "$flag"; then
+      printf '%s\n' "$flag"
+    fi
+  done
+}
+
+# validate_compose_file <file> [extra docker compose config flags...]
+validate_compose_file() {
+  local file="$1"
+  shift
+  docker compose -f "$file" config --quiet "$@"
+}

.gitea/workflows/deploy-lib.sh

@@ -3,16 +3,34 @@
 #   REPO=/srv/homelab APPLY_PRUNE=false bash -se <<'EOF'
 #   source "$REPO/.gitea/workflows/deploy-lib.sh"
 #   run_stage "$STAGE"
-# EOF
+#   EOF
 set -euo pipefail
 
 : "${REPO:?REPO must be set}"
 APPLY_PRUNE="${APPLY_PRUNE:-false}"
+# Commit CI validated. Empty for a manual workflow_dispatch, which falls back to
+# the current origin/main.
+DEPLOY_SHA="${DEPLOY_SHA:-}"
+# Handoff point between the apply stage (writes) and the verify stage (reads).
+# Under the deploy user's own XDG state directory rather than /var/backups: the
+# deploy is unprivileged, /var/backups does not exist on a minimal Arch host, and
+# creating it would need root — which is why the first real deploy died here with
+# "is not writable" before touching a single workload. $HOME comes from sshd.
+DEPLOY_SNAPSHOT_DIR="${DEPLOY_SNAPSHOT_DIR:-${XDG_STATE_HOME:-$HOME/.local/state}/homelab-deploy}"
+# Per-workload rollout budget and how many workloads to watch at once. The whole
+# apply job has its own timeout-minutes as a backstop.
+ROLLOUT_TIMEOUT="${ROLLOUT_TIMEOUT:-300}"
+ROLLOUT_PARALLELISM="${ROLLOUT_PARALLELISM:-8}"
+WORKLOAD_KINDS="deployments.apps,statefulsets.apps,daemonsets.apps"
 
 log() {
   echo "== $* =="
 }
 
+warn() {
+  echo "WARNING: $*" >&2
+}
+
 collect_k8s() {
   git -C "$REPO" ls-files -- "$1" \
     | grep -E '\.ya?ml$' \
@@ -27,6 +45,8 @@ kustomize_overlay() {
     echo "$1/overlays/prod"
   elif [ -f "$1/base/kustomization.yaml" ]; then
     echo "$1/base"
+  elif [ -f "$1/kustomization.yaml" ]; then
+    echo "$1"
   fi
 }
 
@@ -43,7 +63,7 @@ select_manifests() {
     fi
     overlay="$(kustomize_overlay "$kd" || true)"
     if [ -n "${overlay:-}" ]; then
-      echo "kustomize app: ${overlay#$REPO/}"
+      echo "kustomize app: ${overlay#"$REPO"/}"
       KUSTOMIZE_APPS+=("$overlay")
     else
       while IFS= read -r f; do
@@ -67,32 +87,485 @@ select_manifests() {
   done < <(git -C "$REPO" ls-files '*/compose.yaml' '*/compose.yml' compose.yaml compose.yml | sort)
 }
 
+# --- post-apply verification and rollback -------------------------------------
+#
+# A green `kubectl apply` says nothing about the cluster being healthy. These
+# helpers watch exactly the workloads whose spec changed during this apply, and
+# on failure roll them back to the revision that was running before, so a bad
+# push to main cannot leave a service crash-looping.
+#
+# Verification lives in its own workflow job, not at the end of the apply stage.
+# Inside a single process it is worthless exactly when it is needed most: a job
+# killed by timeout-minutes or cancelled mid-apply never reaches the rollback
+# code, and leaves a half-applied cluster behind. Split out, the apply job can
+# die in any way and the verify job still runs.
+#
+# That split needs a handoff point on the workstation, because the two stages are
+# separate processes on separate runner jobs: DEPLOY_SNAPSHOT_DIR/current, written
+# before anything is applied, read by the verify stage afterwards.
+
+# Creates this run's snapshot directory and publishes it as the handoff point for
+# the verify stage. Fails hard by design: a deploy that cannot record what it is
+# about to change must not start, because then nothing can be rolled back for it
+# automatically. Publishing happens before the first apply, so an apply killed
+# mid-flight still leaves a usable baseline behind.
+snapshot_dir() {
+  local stamp dir
+  stamp="$(date -u +%Y%m%dT%H%M%SZ)-${DEPLOY_SHA:-$(git -C "$REPO" rev-parse --short HEAD 2>/dev/null || echo unknown)}"
+  dir="$DEPLOY_SNAPSHOT_DIR/$stamp"
+
+  if ! mkdir -p "$DEPLOY_SNAPSHOT_DIR" 2>/dev/null || [ ! -w "$DEPLOY_SNAPSHOT_DIR" ]; then
+    echo "ERROR: $DEPLOY_SNAPSHOT_DIR is not writable." >&2
+    echo "The verify job needs it to learn which workloads this deploy touches." >&2
+    echo "Refusing to deploy without a way to roll back." >&2
+    return 1
+  fi
+  if ! mkdir -p "$dir" 2>/dev/null || [ ! -w "$dir" ]; then
+    echo "ERROR: cannot create snapshot dir $dir" >&2
+    return 1
+  fi
+  if ! printf '%s\n' "$dir" >"$DEPLOY_SNAPSHOT_DIR/current" 2>/dev/null; then
+    echo "ERROR: cannot publish the snapshot pointer at $DEPLOY_SNAPSHOT_DIR/current" >&2
+    return 1
+  fi
+
+  printf '%s\n' "$dir"
+}
+
+save_snapshot() {
+  local dir="$1"
+  log "Saving pre-apply snapshot to $dir"
+  workload_generations >"$dir/generations.before" 2>/dev/null \
+    || warn "could not snapshot workload generations"
+  kubectl get "$WORKLOAD_KINDS" -A -o yaml >"$dir/workloads.yaml" 2>/dev/null \
+    || warn "could not snapshot workloads"
+  for release in prometheus-stack loki alloy; do
+    if helm status "$release" -n prometheus >/dev/null 2>&1; then
+      {
+        echo "revision: $(helm history "$release" -n prometheus -o json 2>/dev/null)"
+        helm get values "$release" -n prometheus --all 2>/dev/null
+      } >"$dir/helm-$release.txt"
+    fi
+  done
+  # The verify stage compares this against the commit it is deploying, to refuse
+  # rolling back against a baseline left by an earlier run. A snapshot we cannot
+  # attribute to a commit is unusable for that, so fail before anything is applied.
+  if ! git -C "$REPO" rev-parse HEAD >"$dir/commit" 2>/dev/null; then
+    echo "ERROR: cannot record the deploy commit in $dir/commit" >&2
+    return 1
+  fi
+}
+
+# Prints "<ns> <name> <kind> <generation>" for every workload in the cluster.
+workload_generations() {
+  kubectl get "$WORKLOAD_KINDS" -A \
+    -o 'custom-columns=NS:.metadata.namespace,NAME:.metadata.name,KIND:.kind,GEN:.metadata.generation' \
+    --no-headers 2>/dev/null \
+    | awk 'NF >= 4 { printf "%s %s %s %s\n", $1, $2, tolower($3), $4 }'
+}
+
+# Prints "<kind> <ns> <name>" for every workload that is new or whose generation
+# moved since the snapshot, i.e. the ones this apply actually touched.
+changed_workloads() {
+  local before="$1"
+  local ns name kind gen old
+  while read -r ns name kind gen; do
+    [ -n "${gen:-}" ] || continue
+    old="$(awk -v want_ns="$ns" -v want_name="$name" \
+      '$1 == want_ns && $2 == want_name { print $4; exit }' "$before" 2>/dev/null || true)"
+    if [ "$old" != "$gen" ]; then
+      printf '%s %s %s\n' "$kind" "$ns" "$name"
+    fi
+  done < <(workload_generations)
+}
+
+# Prints "<ns> <kind>/<name> <image>" for every workload this repository owns that
+# runs an image from our own registry.
+#
+# The repository is the scope, deliberately. The cluster also holds workloads on
+# our registry that no manifest here declares (they are applied out of band), and
+# those are somebody else's to deploy. Walking the manifests rather than the
+# cluster means those can never be restarted by this pipeline, now or later.
+owned_registry_workloads() {
+  local kd_rel f
+  while IFS= read -r kd_rel; do
+    [ -f "$REPO/$kd_rel/active" ] || continue
+    while IFS= read -r f; do
+      [ -n "$f" ] || continue
+      # A file that does not mention the registry cannot declare a workload on it,
+      # and parsing costs ~2.5s per file against a millisecond for the grep. The
+      # filter keeps this at a handful of parses instead of one per manifest.
+      grep -q 'gcr\.forust\.xyz/forust/' "$REPO/$f" 2>/dev/null || continue
+      # kubectl prints a bare object for a single-document file and a List for a
+      # multi-document one, so normalise both shapes before filtering.
+      kubectl apply --dry-run=client -f "$REPO/$f" -o json 2>/dev/null \
+        | jq -r '
+            (if .items then .items[] else . end)
+            | select(.kind | test("^(Deployment|StatefulSet|DaemonSet)$"))
+            | select(any((.spec.template.spec.containers // [])[]?;
+                       (.image // "") | test("^gcr\\.forust\\.xyz/forust/")))
+            | (.metadata.namespace // "default") as $ns
+            | ([.spec.template.spec.containers[].image
+                | select(test("^gcr\\.forust\\.xyz/forust/"))][0]) as $img
+            | "\($ns) \(.kind | ascii_downcase)/\(.metadata.name) \($img)"
+          ' 2>/dev/null || true
+    done < <(collect_k8s "$kd_rel" || true)
+  done < <(
+    git -C "$REPO" ls-files '*.yaml' '*.yml' \
+      | grep -E '(^|/)k8s/' \
+      | sed -E 's#((^|.*/)k8s)/.*#\1#' \
+      | sort -u
+  )
+}
+
+# Prints the digest an image tag resolves to for this cluster's architecture, or
+# nothing when it cannot be resolved.
+#
+# Only the manifest entry matching the node architecture counts. A multi-arch tag
+# also carries `unknown/unknown` entries for the build attestation, and a pod's
+# imageID is always the per-platform digest, so comparing the wrong entry would
+# mark every workload stale forever and restart the whole cluster on every deploy.
+registry_digest() {
+  local arch
+  arch="$(kubectl get nodes -o jsonpath='{.items[0].status.nodeInfo.architecture}' 2>/dev/null || true)"
+  [ -n "$arch" ] || arch=amd64
+  # The || true is load-bearing. Every caller runs under set -euo pipefail, and
+  # pipefail reports the rightmost non-zero stage, so a ref the registry does not
+  # have would abort the caller at the assignment instead of yielding an empty
+  # string. The callers check for empty themselves and report it by name.
+  docker manifest inspect "$1" 2>/dev/null \
+    | jq -r --arg arch "$arch" '
+        .manifests[]?
+        | select(.platform.os == "linux" and .platform.architecture == $arch)
+        | .digest
+      ' 2>/dev/null \
+    | head -1 || true
+}
+
+# Rewrites our own images to immutable digests on the way into the cluster.
+# Reads a manifest stream on stdin, writes the pinned stream to stdout.
+#
+# A digest is not knowable when a manifest is written, so it is resolved here, at
+# apply time, and never committed: git keeps a readable `:prod` tag. That is what
+# makes rollback mean something. `kubectl rollout undo` restores the previous
+# ReplicaSet's pod template verbatim, and a template naming a digest restores the
+# exact bytes that were serving before. A template naming a moving tag does not —
+# the tag has already moved by the time the rollback runs, so the "rollback"
+# re-pulls the very image that just failed and the cluster stays broken.
+#
+# imagePullPolicy is deliberately left alone. The manifests no longer set it, and a
+# reference that is not `:latest` defaults to IfNotPresent, which is what the
+# Kubernetes docs ask for alongside a digest: the bytes under a digest cannot
+# change, so pulling again buys nothing.
+#
+# An image that cannot be resolved is fatal. Carrying on would quietly apply a
+# mutable tag again, which is the exact failure this function exists to remove.
+render_pinned() {
+  local src refs map ref digest missing=0
+  src="$(mktemp)"
+  refs="$(mktemp)"
+  map="$(mktemp)"
+
+  cat >"$src"
+  grep -oE 'gcr\.forust\.xyz/forust/[A-Za-z0-9._-]+:[A-Za-z0-9._-]+' "$src" | sort -u >"$refs" || true
+
+  while read -r ref; do
+    [ -n "$ref" ] || continue
+    digest="$(registry_digest "$ref")"
+    if [ -z "$digest" ]; then
+      echo "ERROR: cannot resolve ${ref} in the registry; applying nothing." >&2
+      echo "       The build job has to push that tag before the deploy resolves it." >&2
+      missing=$((missing + 1))
+      continue
+    fi
+    printf '%s\t%s\n' "$ref" "$digest" >>"$map"
+  done <"$refs"
+  if [ "$missing" -gt 0 ]; then
+    rm -f "$src" "$refs" "$map"
+    return 1
+  fi
+
+  awk -v mapfile="$map" '
+    BEGIN {
+      while ((getline line < mapfile) > 0) {
+        i = index(line, "\t")
+        d[substr(line, 1, i - 1)] = substr(line, i + 1)
+      }
+    }
+    {
+      if (match($0, /^[[:space:]]*image:[[:space:]]*gcr\.forust\.xyz\/forust\/[A-Za-z0-9._-]+:[A-Za-z0-9._-]+[[:space:]]*$/)) {
+        name = $0
+        sub(/^[[:space:]]*image:[[:space:]]*/, "", name)
+        sub(/[[:space:]]*$/, "", name)
+        if (name in d) {
+          pad = $0
+          sub(/image:.*/, "", pad)
+          # Drop the tag: the canonical form used in the docs is repo@sha256:...,
+          # and leaving :prod next to the digest reads like it still matters.
+          repo = name
+          sub(/:[A-Za-z0-9._-]+$/, "", repo)
+          print pad "image: " repo "@" d[name]
+          next
+        }
+      }
+      print
+    }
+  ' "$src"
+  rm -f "$src" "$refs" "$map"
+}
+
+# Restarts every owned workload whose running image is not the one its tag
+# resolves to now.
+#
+# This used to be how a rebuild reached the cluster at all: the manifests pinned
+# `:latest`, so a rebuild left the pod template byte-identical, `kubectl apply`
+# decided there was nothing to do, and the cluster served the previous build
+# indefinitely. The apply now pins digests via render_pinned, so a rebuild moves
+# the pod template and rolls out on its own.
+#
+# What is left is the drift check: a hand-run `kubectl set image`, or anything
+# else that edits a live workload behind the deploy's back, is the only way to end
+# up serving a digest the tag has moved past. It stays idempotent, so a redeploy
+# that changed no image still does not bounce healthy services.
+#
+# The container is matched on its repository rather than on the exact reference:
+# once render_pinned has run, a pod's status reports `repo@sha256:...` while this
+# still reads the repository's `:prod` tag out of the manifest.
+restart_stale_images() {
+  local ns target image want selector running entry one
+  local unchecked=0
+  local -A digests=()
+  local -a stale=()
+  while read -r ns target image; do
+    [ -n "${target:-}" ] || continue
+    if [ -z "${digests[$image]:-}" ]; then
+      digests[$image]="$(registry_digest "$image")"
+    fi
+    want="${digests[$image]}"
+    if [ -z "$want" ]; then
+      warn "cannot resolve ${image##*/} in the registry, leaving $target alone"
+      unchecked=$((unchecked + 1))
+      continue
+    fi
+    selector="$(kubectl get "$target" -n "$ns" -o jsonpath='{.spec.selector.matchLabels}' 2>/dev/null \
+      | jq -r 'to_entries | map("\(.key)=\(.value)") | join(",")' 2>/dev/null)"
+    if [ -z "$selector" ]; then
+      warn "cannot read the pod selector of $target, skipping"
+      unchecked=$((unchecked + 1))
+      continue
+    fi
+    running="$(kubectl get pods -n "$ns" -l "$selector" -o json 2>/dev/null \
+      | jq -r --arg repo "${image%%:*}" '
+          .items[] | .status.containerStatuses[]?
+          | select(.image == $repo
+                   or (.image | startswith($repo + ":"))
+                   or (.image | startswith($repo + "@")))
+          | .imageID
+        ' 2>/dev/null)"
+    if [ -z "$running" ]; then
+      # Scaled to zero. Nothing is serving stale code, and imagePullPolicy
+      # resolves the tag when it is scaled back up.
+      continue
+    fi
+    entry=""
+    while IFS= read -r one; do
+      [ -n "$one" ] || continue
+      entry="${one##*@}"
+      if [ "$entry" != "$want" ]; then
+        stale+=("$ns $target")
+        break
+      fi
+    done <<<"$running"
+  done < <(owned_registry_workloads)
+  if [ "${#stale[@]}" -eq 0 ]; then
+    if [ "$unchecked" -gt 0 ]; then
+      # Say so plainly. Reporting "everything is current" after checking nothing
+      # would tell the operator the deploy is fine when it may not be.
+      warn "No workload needed a restart, but $unchecked could not be checked"
+    else
+      log "All owned workloads already run the image their tag points at"
+    fi
+    return 0
+  fi
+  log "Restarting ${#stale[@]} workload(s) running an image their tag has moved past"
+  for ref in "${stale[@]}"; do
+    log "  $ref"
+  done
+  local failed=()
+  for ref in "${stale[@]}"; do
+    ns="${ref%% *}"
+    target="${ref#* }"
+    if ! kubectl rollout restart "$target" -n "$ns" >/dev/null 2>&1; then
+      failed+=("$ref")
+    fi
+  done
+  if [ "${#failed[@]}" -gt 0 ]; then
+    warn "could not restart: ${failed[*]}"
+    return 1
+  fi
+}
+
+# verify_workloads <failed-file> <kind> <ns> <name> ...
+# Watches every workload in parallel and records the ones that never became
+# healthy. Returns non-zero if any of them failed.
+verify_workloads() {
+  local failed_file="$1"
+  shift
+  [ "$#" -gt 0 ] || return 0
+  : >"$failed_file"
+  local running=0 pid kind ns name
+  local -a pids=()
+  for entry in "$@"; do
+    read -r kind ns name <<<"$entry"
+    (
+      if kubectl rollout status "${kind}/${name}" -n "$ns" --timeout="${ROLLOUT_TIMEOUT}s" >/dev/null 2>&1; then
+        echo "  ok: ${kind}/${ns}/${name}"
+      else
+        echo "  FAILED: ${kind}/${ns}/${name}"
+        printf '%s %s %s\n' "$kind" "$ns" "$name" >>"$failed_file"
+      fi
+    ) &
+    pids+=($!)
+    running=$((running + 1))
+    if [ "$running" -ge "$ROLLOUT_PARALLELISM" ]; then
+      wait -n 2>/dev/null || true
+      running=$((running - 1))
+    fi
+  done
+  for pid in ${pids[@]+"${pids[@]}"}; do
+    wait "$pid" || true
+  done
+  # Non-zero when the file holds at least one failure, i.e. a workload never
+  # became healthy. `[ -s ]` alone is the opposite test and silently disabled
+  # every rollback this stage is meant to perform.
+  [ ! -s "$failed_file" ]
+}
+
+# rollback_workloads <failed-file>
+# Restores the previous revision of every failed workload and waits for it to
+# settle. Prints a report and returns non-zero if any workload is still unhealthy,
+# so the operator knows manual recovery is required.
+rollback_workloads() {
+  local failed_file="$1"
+  local kind ns name unrecovered=()
+  local -a recovered=()
+  while read -r kind ns name; do
+    [ -n "${kind:-}" ] || continue
+    if kubectl rollout undo "${kind}/${name}" -n "$ns" >/dev/null 2>&1 \
+      && kubectl rollout status "${kind}/${name}" -n "$ns" --timeout="${ROLLOUT_TIMEOUT}s" >/dev/null 2>&1; then
+      echo "  rolled back: ${kind}/${ns}/${name}"
+      recovered+=("${kind}/${ns}/${name}")
+    else
+      echo "  NOT RECOVERED: ${kind}/${ns}/${name}"
+      unrecovered+=("${kind}/${ns}/${name}")
+    fi
+  done <"$failed_file"
+  echo "ROLLED_BACK=${#recovered[@]}" >>"$failed_file"
+  echo "UNRECOVERED=${#unrecovered[@]}" >>"$failed_file"
+  [ "${#unrecovered[@]}" -eq 0 ]
+}
+
+# Helm releases owned by this stage, one line each:
+#
+#   release|chart|namespace|chart version|values file (rel. to $REPO)|active marker
+#
+# The chart version is the field Renovate keeps current. The helmv3 manager only
+# understands Chart.yaml and the helm-values manager only values files, so a pin
+# written straight into a `helm upgrade` command would never be updated: these
+# have to be declared as custom.regex managers in renovate/renovate.json.
+HELM_RELEASES=(
+  "prometheus-stack|prometheus-community/kube-prometheus-stack|prometheus|86.2.3|prometheus-stack/k8s/grafana-values.yaml|prometheus-stack/k8s/active"
+  "loki|grafana/loki|prometheus|7.3.0|loki/k8s/loki-values.yaml|loki/k8s/active"
+  "alloy|grafana/alloy|prometheus|1.12.1|loki/k8s/alloy-values.yaml|loki/k8s/active"
+  "reloader|stakater/reloader|reloader|2.2.17|reloader/k8s/reloader-values.yaml|reloader/k8s/active"
+)
+
+# "name url" for the Helm repository hosting a chart, empty if unknown.
+helm_repo_for() {
+  case "$1" in
+    prometheus-community/*) echo "prometheus-community https://prometheus-community.github.io/helm-charts" ;;
+    grafana/*) echo "grafana https://grafana.github.io/helm-charts" ;;
+    stakater/*) echo "stakater https://stakater.github.io/stakater-charts" ;;
+  esac
+}
+
+upgrade_helm_releases() {
+  local entry release chart namespace version values marker repo
+  for entry in ${HELM_RELEASES[@]+"${HELM_RELEASES[@]}"}; do
+    IFS='|' read -r release chart namespace version values marker <<<"$entry"
+    if [ ! -f "$REPO/$marker" ]; then
+      echo "skip (no $marker): $release"
+      continue
+    fi
+    if [ ! -f "$REPO/$values" ]; then
+      echo "ERROR: $values is gitignored but missing on the workstation, restore it first."
+      return 1
+    fi
+    repo="$(helm_repo_for "$chart")"
+    if [ -z "$repo" ]; then
+      echo "ERROR: no Helm repository configured for chart $chart"
+      return 1
+    fi
+    helm repo add "${repo%% *}" "${repo#* }" >/dev/null 2>&1 || true
+    helm repo update "${repo%% *}" >/dev/null 2>&1 || true
+    log "Upgrading $release ($chart $version)"
+    # --atomic rolls the release back when the upgrade times out or the workloads
+    # it touches never become ready, so a bad chart bump is not left half applied.
+    helm upgrade --install "$release" "$chart" \
+      --namespace "$namespace" \
+      --version "$version" \
+      --values "$REPO/$values" \
+      --atomic --cleanup-on-fail --timeout 10m
+  done
+}
+
 stage_preflight() {
   if [ ! -d "$REPO/.git" ]; then
     echo "Repository not found at $REPO"
     exit 1
   fi
-  git -C "$REPO" fetch origin main
+  if [ -n "$DEPLOY_SHA" ]; then
+    log "Checking out the commit CI validated ($DEPLOY_SHA)"
+    git -C "$REPO" fetch origin --quiet "$DEPLOY_SHA" 2>/dev/null \
+      || git -C "$REPO" fetch origin main
+  else
+    git -C "$REPO" fetch origin main
+  fi
+  target="${DEPLOY_SHA:-origin/main}"
   log "Workstation state"
   echo "  local:  $(git -C "$REPO" rev-parse --short HEAD)"
-  echo "  remote: $(git -C "$REPO" rev-parse --short origin/main)"
+  echo "  target: $(git -C "$REPO" rev-parse --short "$target")"
   if [ -n "$(git -C "$REPO" status --porcelain --untracked-files=no)" ]; then
     echo "ERROR: workstation has local tracked modifications, refusing reset:"
     git -C "$REPO" status --porcelain --untracked-files=no
     git -C "$REPO" diff --stat
+    echo "Fix it on the workstation (commit, or 'git restore .'), then re-run the deploy."
     exit 1
   fi
-  git -C "$REPO" reset --hard origin/main
+  git -C "$REPO" reset --hard "$target"
 }
 
 stage_validate() {
   cd "$REPO"
   select_manifests
   local m k cf
+  # Compose .env files and secret files are gitignored by design, so the
+  # workstation never has real values for the inactive stacks. This stage only
+  # runs the full check on active stacks; the general structure check for every
+  # committed Compose file (active or not) lives in the ci workflow, which has no
+  # .env at all.
+  #
+  # Active stacks are still validated with interpolation and env-file resolution
+  # off, so required-variable guards (:?) and missing local files do not fail the
+  # deploy. Normalization and consistency checks stay enabled.
+  # shellcheck source=compose-lint.sh
+  source "$REPO/.gitea/workflows/compose-lint.sh"
+  local compose_validate_flags=()
+  mapfile -t compose_validate_flags < <(compose_safe_flags)
   log "Validate compose stacks"
   for cf in ${COMPOSE_STACKS[@]+"${COMPOSE_STACKS[@]}"}; do
     echo "  config: $cf"
-    docker compose -f "$cf" config --quiet
+    validate_compose_file "$cf" ${compose_validate_flags[@]+"${compose_validate_flags[@]}"}
   done
   log "Validate k8s manifests (kubectl dry-run=client)"
   for m in ${K8S_MANIFESTS[@]+"${K8S_MANIFESTS[@]}"}; do
@@ -109,7 +582,7 @@ stage_validate() {
     kubectl apply -k "$k" --dry-run=server >/dev/null
   done
   log "Checking referenced Secrets exist"
-  echo "  (deploy never applies *secret*.yaml; create missing ones from the laptop)"
+  echo "  (deploy never applies *secret*.yaml; create missing ones manually)"
   local ref_secrets=() missing_secrets=() all_secrets s
   if [ "${#K8S_MANIFESTS[@]}" -gt 0 ]; then
     while IFS= read -r s; do
@@ -152,6 +625,13 @@ stage_apply_k8s() {
   if [ "$APPLY_PRUNE" = "true" ]; then
     prune_opts=(--prune -l app.kubernetes.io/managed-by=homelab-deploy)
   fi
+
+  # Record what is about to change, and publish it for the verify job, before
+  # the first apply. Both are fatal on failure: see snapshot_dir.
+  local snapshot
+  snapshot="$(snapshot_dir)" || return 1
+  save_snapshot "$snapshot" || return 1
+
   if [ "${#ns_files[@]}" -gt 0 ]; then
     log "Applying namespaces (${#ns_files[@]} files)"
     for m in "${ns_files[@]}"; do
@@ -163,37 +643,23 @@ stage_apply_k8s() {
       echo "ERROR: prometheus-stack/k8s/grafana-values.yaml (gitignored) missing on workstation, restore it first."
       exit 1
     fi
-    log "Upgrading kube-prometheus-stack"
-    helm upgrade --install prometheus-stack prometheus-community/kube-prometheus-stack \
-      --namespace prometheus \
-      --version 86.2.3 \
-      --values "$REPO/prometheus-stack/k8s/grafana-values.yaml" \
-      --wait --timeout 10m
-  fi
-  if [ -f "$REPO/loki/k8s/active" ]; then
-    log "Upgrading loki/alloy"
-    helm repo add grafana https://grafana.github.io/helm-charts >/dev/null 2>&1 || true
-    helm repo update grafana >/dev/null 2>&1 || true
-    helm upgrade --install loki grafana/loki \
-      --version 7.3.0 \
-      --namespace prometheus \
-      --values "$REPO/loki/k8s/loki-values.yaml" \
-      --wait --timeout 10m
-    helm upgrade --install alloy grafana/alloy \
-      --version 1.12.1 \
-      --namespace prometheus \
-      --values "$REPO/loki/k8s/alloy-values.yaml" \
-      --wait --timeout 10m
   fi
+  upgrade_helm_releases
   if [ "${#other_files[@]}" -gt 0 ]; then
-    log "Applying resources (${#other_files[@]} files)"
+    log "Applying resources (${#other_files[@]} files, our images pinned to digests)"
     for m in "${other_files[@]}"; do
-      kubectl apply "${prune_opts[@]}" -f "$m"
+      if ! render_pinned <"$m" | kubectl apply "${prune_opts[@]}" -f -; then
+        echo "ERROR: apply failed for ${m#"$REPO"/}" >&2
+        exit 1
+      fi
     done
   fi
   for k in ${KUSTOMIZE_APPS[@]+"${KUSTOMIZE_APPS[@]}"}; do
-    log "Applying kustomize app: ${k#$REPO/}"
+    log "Applying kustomize app: ${k#"$REPO"/} (our images pinned to digests)"
-    kubectl apply -k "$k"
+    if ! kubectl kustomize "$k" | render_pinned | kubectl apply -f -; then
+      echo "ERROR: apply failed for kustomize app ${k#"$REPO"/}" >&2
+      exit 1
+    fi
   done
   if [ -f "$REPO/userbot/k8s/active" ]; then
     log "userbot panel hook"
@@ -207,9 +673,220 @@ stage_apply_k8s() {
     else
       echo "  WARNING: userbot-common-secrets missing in both default and userbot ns; create it manually from the laptop"
     fi
-    kubectl rollout restart deployment/userbot-panel -n userbot
-    kubectl rollout status deployment/userbot-panel -n userbot --timeout=180s
   fi
+  restart_stale_images
+
+  # No verification here on purpose. This stage may be killed at any point by
+  # timeout-minutes, by the runner cancelling the job, or by a dropped SSH
+  # connection, and any code below that line would simply not run. stage_verify_k8s
+  # picks the work up from the snapshot instead.
+  log "Applied. Verification and rollback are the verify job's job, not this one's."
+}
+
+# Runs as its own workflow job, after apply-k8s (and apply-compose) are done —
+# including when they failed, timed out or were cancelled. Reads the baseline the
+# apply stage published and works out what it changed, watches those workloads,
+# and rolls back the ones that never became healthy.
+stage_verify_k8s() {
+  local pointer="$DEPLOY_SNAPSHOT_DIR/current"
+  local snapshot want have generations
+  local -a touched=()
+
+  if [ ! -s "$pointer" ]; then
+    echo "ERROR: no snapshot pointer at $pointer."
+    echo "The apply stage died before publishing any state, so there is no baseline to"
+    echo "tell which workloads it touched. Nothing can be rolled back automatically —"
+    echo "inspect the cluster by hand."
+    return 1
+  fi
+  snapshot="$(head -1 "$pointer")"
+  if [ ! -d "$snapshot" ]; then
+    echo "ERROR: snapshot pointer refers to a missing directory: $snapshot"
+    return 1
+  fi
+
+  # Never trust the pointer blindly. If the apply stage was killed before it
+  # published its own snapshot, `current` still points at the previous deploy's
+  # baseline. Verifying against that would watch the wrong workloads and the
+  # rollback would revert the wrong revisions, so refuse instead.
+  want="${DEPLOY_SHA:-}"
+  if [ -z "$want" ]; then
+    want="$(git -C "$REPO" rev-parse HEAD 2>/dev/null || true)"
+  fi
+  have="$(cat "$snapshot/commit" 2>/dev/null || true)"
+  if [ -z "$want" ] || [ "$have" != "$want" ]; then
+    echo "ERROR: refusing to verify or roll back against a stale snapshot."
+    echo "  snapshot:        $snapshot"
+    echo "  snapshot commit: ${have:-<missing>}"
+    echo "  deploy commit:   ${want:-<unknown>}"
+    return 1
+  fi
+  echo "  snapshot: $snapshot (commit ${have:0:12})"
+
+  generations="$snapshot/generations.before"
+  if [ ! -s "$generations" ]; then
+    # Without a baseline we cannot tell which workloads the apply touched, so
+    # fall back to watching everything rather than silently skipping the check.
+    warn "no pre-apply baseline, verifying every workload in the cluster"
+    : >"$generations"
+  fi
+
+  while read -r kind ns name; do
+    [ -n "${kind:-}" ] && touched+=("$kind $ns $name")
+  done < <(changed_workloads "$generations")
+
+  log "Verifying ${#touched[@]} changed workload(s) (timeout ${ROLLOUT_TIMEOUT}s each)"
+  if [ "${#touched[@]}" -eq 0 ]; then
+    echo "  nothing to verify"
+    return 0
+  fi
+  printf '  watching: %s\n' "${touched[@]/#/    }"
+
+  local failed_file="$snapshot/failed-workloads"
+  if ! verify_workloads "$failed_file" ${touched[@]+"${touched[@]}"}; then
+    echo
+    echo "ERROR: ${#touched[@]} workload(s) changed by this deploy, and these never became healthy:"
+    grep -v -E '^(ROLLED_BACK|UNRECOVERED)=' "$failed_file" | sed 's/^/  - /'
+    echo
+    log "Rolling back to the previous revision"
+    if rollback_workloads "$failed_file"; then
+      echo
+      echo "Rolled back successfully. The cluster is back on the pre-deploy revision."
+      echo "Nothing else was reverted: Git holds desired state only, so config changes, PVCs and"
+      echo "externally created resources from this commit are still in place. Review the failed"
+      echo "workload, then re-run the deploy (Actions -> deploy -> Run workflow)."
+    else
+      echo
+      echo "Rollback did NOT fully recover the cluster. Manual intervention required:"
+      grep -E '^(ROLLED_BACK|UNRECOVERED)=' "$failed_file" | sed 's/^/  /'
+      echo "Pre-apply snapshot: $snapshot"
+    fi
+    return 1
+  fi
+}
+
+# verify_compose_stack <compose-file>
+# `docker compose up -d` exits 0 as soon as containers are created, so a stack can
+# come back broken with a green pipeline. Require every long-running service to
+# actually be running.
+verify_compose_stack() {
+  local cf="$1"
+  local expected running missing=()
+  expected="$(docker compose -f "$cf" config --services 2>/dev/null | sort || true)"
+  running="$(docker compose -f "$cf" ps --status running --services 2>/dev/null | sort || true)"
+  [ -n "$expected" ] || return 0
+  while IFS= read -r svc; do
+    [ -n "$svc" ] || continue
+    # restart:"no" services are allowed to have exited.
+    if ! printf '%s\n' "$running" | grep -qx "$svc" \
+      && ! docker compose -f "$cf" config 2>/dev/null \
+      | grep -A5 "^  ${svc}:" | grep -qE 'restart:\s*"?no"?'; then
+      missing+=("$svc")
+    fi
+  done <<<"$expected"
+  if [ "${#missing[@]}" -gt 0 ]; then
+    echo "  NOT RUNNING: ${missing[*]}"
+    docker compose -f "$cf" ps --all 2>/dev/null | sed 's/^/    /' || true
+    return 1
+  fi
+  echo "  all ${#expected} service(s) running"
+  return 0
+}
+
+# The public hostname of every active service, one per line.
+#
+# Comments are stripped first, and deliberately so: a route that someone
+# disabled by commenting it out is not a service to probe, and naio and xui are
+# both still in the tree that way. A `#` only starts a comment when it is at the
+# start of a line or after whitespace, so `s/#.*//` alone would also cut a
+# legitimate value in half.
+#
+# Only the public names. The *.internal names are the same Traefik and the same
+# Services, reached by a different label, so probing both would double the run
+# to learn the same thing. The public name is also the one a user types.
+smoke_hosts() {
+  local m k
+  # The backticks below are literal. They are Traefik's Host() delimiter, and the
+  # single quotes are precisely what keeps the shell from reading them as a
+  # command substitution, so the warning is the opposite of a real problem.
+  # shellcheck disable=SC2016
+  {
+    for m in ${K8S_MANIFESTS[@]+"${K8S_MANIFESTS[@]}"}; do
+      [ -f "$m" ] && cat "$m"
+    done
+    for k in ${KUSTOMIZE_APPS[@]+"${KUSTOMIZE_APPS[@]}"}; do
+      kubectl kustomize "$k" 2>/dev/null || true
+    done
+  } | sed -E 's/(^|[[:space:]])#.*$//' \
+    | grep -oE 'Host\(`[^`]+`\)' \
+    | sed -E 's/^Host\(`//; s/`\)$//' \
+    | grep -E '(^|\.)forust\.xyz$' \
+    | grep -v '\${' \
+    | sort -u
+}
+
+# stage_verify_k8s watches the rollout, which reports that the pods converged.
+# It cannot tell a converged pod from a serving one: a route pointing at the
+# wrong port, a Service selector that matches nothing the app listens on, a 500
+# from the app itself, an OOMKill loop that still counts as Available for long
+# enough to pass. All of those are green at the rollout level.
+#
+# So ask the thing users ask. Any HTTP response proves Traefik matched the
+# host, the Service resolved to a pod and the pod answered -- a 302 to a login
+# or a 404 from a path the service does not serve still means the chain is
+# intact. Only a transport failure (no DNS, refused, timeout) or a 5xx means
+# the service is not serving, and only those fail the run.
+stage_smoke() {
+  cd "$REPO"
+  select_manifests >/dev/null
+  local -a hosts=()
+  # Not named failed: an array of that name already exists in restart_stale_images
+  # above, and a scalar shadowing an array is a trap rather than a shadow.
+  local h code rc bad=0
+  while IFS= read -r h; do
+    [ -n "$h" ] && hosts+=("$h")
+  done < <(smoke_hosts)
+
+  if [ "${#hosts[@]}" -eq 0 ]; then
+    # Nothing to probe means the extraction broke, not that the cluster is empty.
+    echo "ERROR: no public hostnames found in active manifests, refusing to report success"
+    return 1
+  fi
+
+  log "Probing ${#hosts[@]} public route(s)"
+  for h in "${hosts[@]}"; do
+    code="$(curl -sS -o /dev/null --max-time 20 -w '%{http_code}' "https://$h/" 2>/dev/null)" && rc=0 || rc=$?
+    if [ "$rc" -ne 0 ]; then
+      echo "  UNREACHABLE $h (curl exit $rc)"
+      bad=1
+      continue
+    fi
+    # A glob, not a string compare. `case` on the leading digit is the only one
+    # of these that survives a three-digit code, and the obvious expansion to
+    # try first -- ${code%%[0-9]*} -- is empty for every input, so it silently
+    # reports a 500 as healthy.
+    case "$code" in
+      5*)
+        echo "  SERVER ERROR $h $code"
+        bad=1
+        ;;
+      000)
+        # curl exited 0 and still no status, so nothing on the far end replied.
+        # Not a pass, whatever the transport thought.
+        echo "  NO RESPONSE $h"
+        bad=1
+        ;;
+      *)
+        echo "  ok $h $code"
+        ;;
+    esac
+  done
+
+  if [ "$bad" -ne 0 ]; then
+    echo "ERROR: at least one active service is not serving over its public route"
+    return 1
+  fi
+  echo "all ${#hosts[@]} route(s) answered"
 }
 
 stage_apply_compose() {
@@ -225,6 +902,23 @@ stage_apply_compose() {
     fi
     docker compose -f "$cf" up -d --pull always --remove-orphans
   done
+
+  local -a broken=()
+  for cf in ${COMPOSE_STACKS[@]+"${COMPOSE_STACKS[@]}"}; do
+    echo "  verifying: $cf"
+    if ! verify_compose_stack "$cf"; then
+      broken+=("$cf")
+    fi
+  done
+  if [ "${#broken[@]}" -gt 0 ]; then
+    echo
+    echo "ERROR: ${#broken[@]} compose stack(s) did not come up:"
+    printf '  - %s\n' "${broken[@]}"
+    echo "Compose stacks are not rolled back automatically: their images use mutable"
+    echo "':latest' tags, so there is no previous version to return to. Check the logs"
+    echo "above, then re-run the deploy once the cause is fixed."
+    return 1
+  fi
 }
 
 run_stage() {
@@ -232,6 +926,8 @@ run_stage() {
     preflight) stage_preflight ;;
     validate) stage_validate ;;
     apply-k8s) stage_apply_k8s ;;
+    verify-k8s) stage_verify_k8s ;;
+    smoke) stage_smoke ;;
     apply-compose) stage_apply_compose ;;
     *)
       echo "ERROR: unknown stage: $1"

.gitea/workflows/deploy.yaml

@@ -1,13 +1,26 @@
 name: deploy
 
 on:
-  push:
+  # Deploy only what CI already validated. workflow_run is used instead of
-    branches:
+  # workflow_dispatch so a red lint/validate run can never reach the cluster.
-      - main
+  workflow_run:
+    workflows: [ci]
+    types: [completed]
   workflow_dispatch:
 
+# The deploy jobs read the tree, then reach the cluster over SSH with the
+# deploy key. The Actions token itself is not part of that path, so it gets
+# read-only contents and no more.
+permissions:
+  contents: read
+
 concurrency:
   group: deploy-main
+  # Queue instead of cancelling. Cancelling a run kills the apply job mid-loop and
+  # takes the verify job down with it, so a superseded deploy would leave the
+  # cluster half-applied and unchecked — the exact failure the verify job exists
+  # to catch. kubectl apply and docker compose up are both idempotent, so letting
+  # the older run finish and then deploying the newer commit costs little.
   cancel-in-progress: false
 
 env:
@@ -17,10 +30,21 @@ env:
   DEPLOY_PATH: ${{ secrets.DEPLOY_PATH }}
   DEPLOY_KEY: ${{ secrets.DEPLOY_SSH_KEY }}
   APPLY_PRUNE: ${{ vars.APPLY_PRUNE }}
+  # workflow_run's own GITHUB_SHA points at the branch head, not at the commit the
+  # finished ci run checked. Pin the exact validated commit instead, so a push
+  # landing mid-deploy cannot make the workstation deploy something else. Also
+  # what the verify job checks the snapshot against. Empty for workflow_dispatch,
+  # which falls back to the current origin/main.
+  DEPLOY_SHA: ${{ github.event.workflow_run.head_sha }}
 
 jobs:
   preflight:
+    if: >-
+      github.event_name != 'workflow_run' ||
+      (github.event.workflow_run.conclusion == 'success' &&
+       github.event.workflow_run.head_branch == 'main')
     runs-on: [self-hosted, linux, arch, homelab, prod]
+    timeout-minutes: 10
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -34,6 +58,7 @@ jobs:
   validate:
     needs: [preflight]
     runs-on: [self-hosted, linux, arch, homelab, prod]
+    timeout-minutes: 20
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -47,6 +72,10 @@ jobs:
   apply-k8s:
     needs: [validate]
     runs-on: [self-hosted, linux, arch, homelab, prod]
+    # Apply only, no verification, so this is just the work itself: snapshot,
+    # then up to three sequential `helm upgrade --atomic --timeout 10m`, then the
+    # apply loop. Verification has its own job and its own budget.
+    timeout-minutes: 45
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -60,6 +89,7 @@ jobs:
   apply-compose:
     needs: [validate]
     runs-on: [self-hosted, linux, arch, homelab, prod]
+    timeout-minutes: 30
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
@@ -69,3 +99,53 @@ jobs:
         run: |
           set -euo pipefail
           ./.gitea/workflows/ssh-run.sh apply-compose
+
+  # Watches the workloads this deploy changed and rolls back the ones that never
+  # became healthy. Runs even when the apply jobs failed, timed out or were
+  # cancelled — that is the whole point of splitting it out. `always()` is what
+  # lets it start after a failed dependency; the needs on apply-compose are a
+  # barrier, so verification begins only once both applies are done.
+  verify-k8s:
+    needs: [apply-k8s, apply-compose]
+    if: >-
+      always() &&
+      needs.apply-k8s.result != 'skipped' &&
+      needs.apply-compose.result != 'skipped'
+    runs-on: [self-hosted, linux, arch, homelab, prod]
+    # ceil(changed_workloads / 8) waves of ROLLOUT_TIMEOUT each, plus rollback.
+    timeout-minutes: 30
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      - name: Verify workloads and roll back on failure
+        shell: bash
+        run: |
+          set -euo pipefail
+          ./.gitea/workflows/ssh-run.sh verify-k8s
+
+  # Asks the public route of every active service whether it is actually
+  # serving, which the rollout check above structurally cannot: a pod can
+  # converge and still be crash-looping, or be listening on a port no Service
+  # points at, or answer 500.
+  #
+  # `always()` for the same reason verify-k8s has it, and it runs after that job
+  # specifically because a rollback is when a route most needs re-checking. The
+  # needs is a barrier, not a filter: whether verify-k8s passed, failed or was
+  # cancelled, the probes are what say whether the cluster is serving, and
+  # suppressing them on a rollback would hide the one run where the answer
+  # matters most.
+  smoke:
+    needs: [verify-k8s]
+    if: always() && needs.verify-k8s.result != 'skipped'
+    runs-on: [self-hosted, linux, arch, homelab, prod]
+    timeout-minutes: 10
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
+
+      - name: Probe the public route of every active service
+        shell: bash
+        run: |
+          set -euo pipefail
+          ./.gitea/workflows/ssh-run.sh smoke

.gitea/workflows/install-ci-tools.sh

@@ -0,0 +1,233 @@
+#!/usr/bin/env bash
+# Installs the pinned CI tools into "$TOOLS_DIR/bin" and echoes that directory
+# on stdout, so callers can do:
+#
+#   export PATH="$(bash .gitea/workflows/install-ci-tools.sh kubeconform shellcheck):$PATH"
+#
+# Versions come from tool-versions.env next to this script and are kept fresh by
+# Renovate. Re-running is cheap: an already-installed tool at the pinned version
+# is left alone.
+set -euo pipefail
+
+here="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+# shellcheck source=tool-versions.env
+. "$here/tool-versions.env"
+
+TOOLS_DIR="${TOOLS_DIR:-${RUNNER_TEMP:-/tmp}/homelab-tools}"
+BIN_DIR="$TOOLS_DIR/bin"
+mkdir -p "$BIN_DIR"
+
+arch="$(uname -m)"
+# Upstream projects disagree on arch spelling: kubeconform and actionlint use
+# Go names (amd64/arm64), shellcheck uses uname names (x86_64/aarch64), node
+# uses neither (x64/arm64), and hadolint mixes the two in a single release
+# (x86_64 but arm64).
+case "$arch" in
+  x86_64 | amd64)
+    goarch=amd64
+    sharch=x86_64
+    nodearch=x64
+    hadolintarch=x86_64
+    ;;
+  aarch64 | arm64)
+    goarch=arm64
+    sharch=aarch64
+    nodearch=arm64
+    hadolintarch=arm64
+    ;;
+  *)
+    echo "install-ci-tools: unsupported architecture: $arch" >&2
+    exit 1
+    ;;
+esac
+
+fetch() {
+  # fetch <url> <dest>
+  if command -v curl >/dev/null 2>&1; then
+    curl -sSLf --retry 3 -o "$2" "$1"
+  elif command -v wget >/dev/null 2>&1; then
+    wget -q -O "$2" "$1"
+  else
+    echo "install-ci-tools: neither curl nor wget is available" >&2
+    exit 1
+  fi
+}
+
+# installed_version <command>
+# Prints the version of an already-installed tool, or nothing. Each tool spells
+# its version flag differently, hence the case.
+installed_version() {
+  local out
+  case "$1" in
+    kubeconform) out="$("$1" -v 2>/dev/null | head -1 || true)" ;;
+    *) out="$("$1" --version 2>/dev/null | head -1 || true)" ;;
+  esac
+  printf '%s' "$out"
+}
+
+# at_version <command> <expected>
+at_version() {
+  case "$(installed_version "$1")" in
+    *"$2"*) return 0 ;;
+    *) return 1 ;;
+  esac
+}
+
+install_kubeconform() {
+  if at_version kubeconform "v${KUBECONFORM_VERSION}"; then
+    return 0
+  fi
+  local tmp
+  tmp="$(mktemp -d)"
+  fetch "https://github.com/yannh/kubeconform/releases/download/v${KUBECONFORM_VERSION}/kubeconform-linux-${goarch}.tar.gz" \
+    "$tmp/kubeconform.tar.gz"
+  tar -xzf "$tmp/kubeconform.tar.gz" -C "$tmp" kubeconform
+  install -m 0755 "$tmp/kubeconform" "$BIN_DIR/kubeconform"
+  rm -rf "$tmp"
+}
+
+install_shellcheck() {
+  if at_version shellcheck "${SHELLCHECK_VERSION}"; then
+    return 0
+  fi
+  local tmp
+  tmp="$(mktemp -d)"
+  fetch "https://github.com/koalaman/shellcheck/releases/download/v${SHELLCHECK_VERSION}/shellcheck-v${SHELLCHECK_VERSION}.linux.${sharch}.tar.xz" \
+    "$tmp/shellcheck.tar.xz"
+  tar -xJf "$tmp/shellcheck.tar.xz" -C "$tmp" --strip-components=1 "shellcheck-v${SHELLCHECK_VERSION}/shellcheck"
+  install -m 0755 "$tmp/shellcheck" "$BIN_DIR/shellcheck"
+  rm -rf "$tmp"
+}
+
+install_uv() {
+  if at_version uv "${UV_VERSION}"; then
+    return 0
+  fi
+  local tmp
+  tmp="$(mktemp -d)"
+  # uv release tags carry no leading v, unlike every other tool installed here.
+  fetch "https://github.com/astral-sh/uv/releases/download/${UV_VERSION}/uv-${sharch}-unknown-linux-gnu.tar.gz" \
+    "$tmp/uv.tar.gz"
+  tar -xzf "$tmp/uv.tar.gz" -C "$tmp" --strip-components=1 "uv-${sharch}-unknown-linux-gnu/uv"
+  install -m 0755 "$tmp/uv" "$BIN_DIR/uv"
+  rm -rf "$tmp"
+}
+
+install_hadolint() {
+  if at_version hadolint "${HADOLINT_VERSION}"; then
+    return 0
+  fi
+  # A bare binary, no archive: hadolint ships one file per platform.
+  fetch "https://github.com/hadolint/hadolint/releases/download/v${HADOLINT_VERSION}/hadolint-linux-${hadolintarch}" \
+    "$BIN_DIR/hadolint"
+  chmod 0755 "$BIN_DIR/hadolint"
+}
+
+# ruff and yamllint both come from PyPI as wheels, which uv unpacks for us.
+install_uv_tool() {
+  # <package> <pinned version>
+  if at_version "$1" "$2"; then
+    return 0
+  fi
+  install_uv
+  UV_TOOL_BIN_DIR="$BIN_DIR" uv tool install --force "$1==$2" >/dev/null
+}
+
+install_ruff() {
+  install_uv_tool ruff "${RUFF_VERSION}"
+}
+
+install_yamllint() {
+  install_uv_tool yamllint "${YAMLLINT_VERSION}"
+}
+
+install_pip_audit() {
+  install_uv_tool pip-audit "${PIP_AUDIT_VERSION}"
+}
+
+install_prettier() {
+  if at_version prettier "${PRETTIER_VERSION}"; then
+    return 0
+  fi
+  # Not a standalone binary: prettier's entry point requires ../package.json
+  # relative to its own real path, so the package directory has to survive
+  # next to it. Hence a versioned directory plus a relative symlink, rather
+  # than copying the one file out as the other installers do.
+  local dir="$BIN_DIR/prettier-${PRETTIER_VERSION}"
+  if [ ! -f "$dir/package/package.json" ]; then
+    rm -rf "$dir"
+    mkdir -p "$dir"
+    fetch "https://registry.npmjs.org/prettier/-/prettier-${PRETTIER_VERSION}.tgz" "$dir/prettier.tgz"
+    tar -xzf "$dir/prettier.tgz" -C "$dir"
+    rm -f "$dir/prettier.tgz"
+    # npm strips the exec bit from bin/ on the way into the tarball.
+    chmod 0755 "$dir/package/bin/prettier.cjs"
+  fi
+  # Relative, so the whole tree stays valid if TOOLS_DIR is relocated.
+  ln -sfn "prettier-${PRETTIER_VERSION}/package/bin/prettier.cjs" "$BIN_DIR/prettier"
+}
+
+install_node() {
+  # npm gets checked by running it, not by looking it up: what matters is that
+  # it answers, so a stub, a half-removed Arch package or a name that resolves
+  # to something broken all have to read as "not installed". The runner's npm
+  # is a symlink into /usr/lib/node_modules/npm, which is exactly the kind of
+  # thing that disappears between runs.
+  if at_version node "v${NODE_VERSION}" && [ -n "$(installed_version npm)" ]; then
+    return 0
+  fi
+  # Same shape as prettier above: the tarball's bin/npm and bin/npx are links
+  # into lib/node_modules, so the whole tree has to survive next to them.
+  local dir="$BIN_DIR/node-${NODE_VERSION}"
+  if [ ! -x "$dir/bin/node" ]; then
+    rm -rf "$dir"
+    mkdir -p "$dir"
+    fetch "https://nodejs.org/dist/v${NODE_VERSION}/node-v${NODE_VERSION}-linux-${nodearch}.tar.xz" \
+      "$dir/node.tar.xz"
+    tar -xJf "$dir/node.tar.xz" -C "$dir" --strip-components=1 "node-v${NODE_VERSION}-linux-${nodearch}"
+    rm -f "$dir/node.tar.xz"
+  fi
+  # Relative, so the whole tree stays valid if TOOLS_DIR is relocated.
+  for bin in node npm npx; do
+    ln -sfn "node-${NODE_VERSION}/bin/${bin}" "$BIN_DIR/${bin}"
+  done
+}
+
+install_actionlint() {
+  if at_version actionlint "${ACTIONLINT_VERSION}"; then
+    return 0
+  fi
+  local tmp
+  tmp="$(mktemp -d)"
+  fetch "https://github.com/rhysd/actionlint/releases/download/v${ACTIONLINT_VERSION}/actionlint_${ACTIONLINT_VERSION}_linux_${goarch}.tar.gz" \
+    "$tmp/actionlint.tar.gz"
+  tar -xzf "$tmp/actionlint.tar.gz" -C "$tmp" actionlint
+  install -m 0755 "$tmp/actionlint" "$BIN_DIR/actionlint"
+  rm -rf "$tmp"
+}
+
+wanted=("$@")
+if [ "${#wanted[@]}" -eq 0 ]; then
+  wanted=(kubeconform shellcheck actionlint prettier ruff yamllint hadolint)
+fi
+
+for tool in "${wanted[@]}"; do
+  case "$tool" in
+    kubeconform) install_kubeconform ;;
+    shellcheck) install_shellcheck ;;
+    actionlint) install_actionlint ;;
+    prettier) install_prettier ;;
+    ruff) install_ruff ;;
+    yamllint) install_yamllint ;;
+    pip-audit) install_pip_audit ;;
+    hadolint) install_hadolint ;;
+    node) install_node ;;
+    uv) install_uv ;;
+    *)
+      echo "install-ci-tools: unknown tool: $tool" >&2
+      exit 1
+      ;;
+  esac
+done
+
+printf '%s\n' "$BIN_DIR"

.gitea/workflows/renovate-ci.yaml

@@ -7,33 +7,58 @@ on:
       - main
   workflow_dispatch:
 
+permissions:
+  contents: read
+
 jobs:
   validate-renovate:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 20
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
 
-      - name: Validate Renovate Compose draft
+      # renovate/k8s/cronjob.yaml is the single source of truth for the image tag,
+      # so the same version that runs in the cluster is the one validated here.
+      - name: Resolve the deployed Renovate image
+        id: image
         shell: bash
         run: |
           set -euo pipefail
-          trap 'rm -f renovate/.env' EXIT
+          image="$(sed -n 's|.*image:[[:space:]]*\(renovate/renovate:[^[:space:]]*\).*|\1|p' \
-          printf '%s\n' \
+            renovate/k8s/cronjob.yaml | head -1)"
-            'RENOVATE_ENDPOINT=https://gitea.example/api/v1' \
+          if [ -z "$image" ]; then
-            'RENOVATE_TOKEN=test-token' \
+            echo "::error::no renovate/renovate image found in renovate/k8s/cronjob.yaml"
-            'RENOVATE_REPOSITORIES=forust/homelab' \
+            exit 1
-            > renovate/.env
+          fi
-          docker compose -f renovate/renovate-compose.yaml config --quiet
+          echo "using $image"
+          echo "image=$image" >> "$GITHUB_OUTPUT"
 
-      - name: Validate Kubernetes manifests
+      - name: Validate Renovate repository config
         shell: bash
         run: |
           set -euo pipefail
           docker run --rm \
-            -v "$PWD:/work" \
+            -v "$PWD/renovate:/opt/renovate:ro" \
-            -w /work \
+            -e RENOVATE_CONFIG_FILE=/opt/renovate/renovate.json \
-            ghcr.io/yannh/kubeconform:latest \
+            "${{ steps.image.outputs.image }}" \
+            renovate-config-validator /opt/renovate/renovate.json
+
+      # The CronJob cannot read the repository, so renovate/k8s/configmap.yaml
+      # carries an inlined copy of the config. Fail if it no longer matches.
+      - name: Check the generated Renovate ConfigMap
+        shell: bash
+        run: |
+          set -euo pipefail
+          ./.gitea/workflows/sync-renovate-configmap.sh --check
+
+      - name: Validate Renovate Kubernetes manifests
+        shell: bash
+        run: |
+          set -euo pipefail
+          tools_dir="$(bash .gitea/workflows/install-ci-tools.sh kubeconform)"
+          export PATH="$tools_dir:$PATH"
+          kubeconform \
             -strict \
             -ignore-missing-schemas \
             -summary \
@@ -41,12 +66,11 @@ jobs:
             renovate/k8s/configmap.yaml \
             renovate/k8s/cronjob.yaml
 
-      - name: Validate Renovate repository config
+      - name: Validate Renovate Compose file
         shell: bash
         run: |
           set -euo pipefail
-          docker run --rm \
+          source .gitea/workflows/compose-lint.sh
-            -v "$PWD:/work" \
+          mapfile -t safe_flags < <(compose_safe_flags)
-            -w /work \
+          validate_compose_file renovate/renovate-compose.yaml \
-            renovate/renovate:44.103.0 \
+            ${safe_flags[@]+"${safe_flags[@]}"}
-            renovate-config-validator renovate.json

.gitea/workflows/renovate-run.yaml

@@ -21,6 +21,11 @@ on:
         default: false
         type: boolean
 
+# Renovate writes through its own bot PAT, passed in as RENOVATE_TOKEN, so the
+# Actions token is only ever used to read the checkout.
+permissions:
+  contents: read
+
 concurrency:
   group: renovate-run
   cancel-in-progress: false
@@ -28,18 +33,36 @@ concurrency:
 jobs:
   run-renovate:
     runs-on: [self-hosted, linux, arch, homelab]
+    timeout-minutes: 60
     steps:
       - name: Checkout repository
         uses: actions/checkout@11d5960a326750d5838078e36cf38b85af677262 # v4
 
+      # renovate/k8s/cronjob.yaml is the single source of truth for the image tag.
+      # Reading it here means this workflow validates and runs the exact version
+      # that is deployed, instead of a copy that silently goes stale.
+      - name: Resolve the deployed Renovate image
+        id: image
+        shell: bash
+        run: |
+          set -euo pipefail
+          image="$(sed -n 's|.*image:[[:space:]]*\(renovate/renovate:[^[:space:]]*\).*|\1|p' \
+            renovate/k8s/cronjob.yaml | head -1)"
+          if [ -z "$image" ]; then
+            echo "::error::no renovate/renovate image found in renovate/k8s/cronjob.yaml"
+            exit 1
+          fi
+          echo "using $image"
+          echo "image=$image" >> "$GITHUB_OUTPUT"
+
       - name: Validate Renovate config
         shell: bash
         run: |
           set -euo pipefail
           docker run --rm \
-            -v "$PWD/renovate/config.js:/opt/renovate/config.js:ro" \
+            -v "$PWD/renovate/renovate.json:/opt/renovate/renovate.json:ro" \
-            -e RENOVATE_CONFIG_FILE=/opt/renovate/config.js \
+            -e RENOVATE_CONFIG_FILE=/opt/renovate/renovate.json \
-            renovate/renovate:44.103.0 \
+            "${{ steps.image.outputs.image }}" \
             renovate-config-validator
 
       - name: Run Renovate
@@ -56,14 +79,14 @@ jobs:
           : "${RENOVATE_TOKEN:?missing RENOVATE_TOKEN secret — add a renovate-bot PAT in repo/org Actions secrets}"
 
           docker run --rm \
-            -v "$PWD/renovate/config.js:/opt/renovate/config.js:ro" \
+            -v "$PWD/renovate/renovate.json:/opt/renovate/renovate.json:ro" \
             -e RENOVATE_PLATFORM=gitea \
             -e RENOVATE_ENDPOINT=https://gitea.forust.xyz/api/v1 \
             -e RENOVATE_TOKEN="$RENOVATE_TOKEN" \
             -e RENOVATE_GITHUB_COM_TOKEN="${RENOVATE_GITHUB_COM_TOKEN:-}" \
             -e RENOVATE_REPOSITORIES="${RENOVATE_REPOSITORIES:-forust/homelab}" \
             -e RENOVATE_DRY_RUN="${RENOVATE_DRY_RUN:-}" \
-            -e RENOVATE_CONFIG_FILE=/opt/renovate/config.js \
+            -e RENOVATE_CONFIG_FILE=/opt/renovate/renovate.json \
             -e RENOVATE_BASE_DIR=/tmp/renovate \
             -e LOG_LEVEL="${LOG_LEVEL:-info}" \
-            renovate/renovate:44.103.0
+            "${{ steps.image.outputs.image }}"

.gitea/workflows/ssh-run.sh

@@ -11,15 +11,20 @@ deploy_port="${DEPLOY_PORT:-22}"
 deploy_path="${DEPLOY_PATH:-/srv/homelab}"
 deploy_path="$(printf '%s' "$deploy_path" | tr -d '\"' | tr -d '\r' | xargs)"
 
-ssh_key="$RUNNER_TEMP/deploy_key"
+# The private key is written to a per-run directory that is removed on exit, so a
-mkdir -p "$RUNNER_TEMP"
+# failed or cancelled job cannot leave deploy credentials in the runner's temp
+# directory. Do not use a fixed path: apply-k8s and apply-compose run in parallel.
+key_dir="$(mktemp -d "${RUNNER_TEMP:-/tmp}/homelab-deploy-key.XXXXXXXX")"
+trap 'rm -rf "$key_dir"' EXIT INT TERM
+
+ssh_key="$key_dir/deploy_key"
 printf '%s\n' "$DEPLOY_KEY" > "$ssh_key"
 chmod 600 "$ssh_key"
 
 ssh -i "$ssh_key" -p "$deploy_port" \
   -o BatchMode=yes -o StrictHostKeyChecking=accept-new \
   "${DEPLOY_USER}@${DEPLOY_HOST}" \
-  "REPO=$deploy_path APPLY_PRUNE=${APPLY_PRUNE:-false} STAGE=$1 bash -se" <<'EOF'
+  "REPO=$deploy_path APPLY_PRUNE=${APPLY_PRUNE:-false} DEPLOY_SHA=${DEPLOY_SHA:-} DEPLOY_SNAPSHOT_DIR=${DEPLOY_SNAPSHOT_DIR:-} STAGE=$1 bash -se" <<'EOF'
 source "$REPO/.gitea/workflows/deploy-lib.sh"
 run_stage "$STAGE"
 EOF

.gitea/workflows/sync-renovate-configmap.sh

@@ -0,0 +1,55 @@
+#!/usr/bin/env bash
+# Regenerates renovate/k8s/configmap.yaml from renovate/renovate.json.
+#
+# renovate/renovate.json is the single source of truth: the CronJob, the Compose
+# file and the renovate-run workflow all mount that exact file. A ConfigMap cannot
+# read a file from the repository, so the same bytes are inlined here as a literal
+# block. This script keeps the copy honest:
+#
+#   .gitea/workflows/sync-renovate-configmap.sh          # rewrite in place
+#   .gitea/workflows/sync-renovate-configmap.sh --check  # fail if out of date
+#
+# renovate-ci runs the --check form on every PR and push, so a config change that
+# forgets to regenerate the ConfigMap cannot be merged.
+set -euo pipefail
+
+here="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+repo="$(git -C "$here" rev-parse --show-toplevel)"
+
+src="$repo/renovate/renovate.json"
+dst="$repo/renovate/k8s/configmap.yaml"
+[ -f "$src" ] || {
+  echo "missing $src" >&2
+  exit 1
+}
+
+render() {
+  cat <<'HEADER'
+# GENERATED FILE - do not edit by hand.
+# Source: renovate/renovate.json
+# Regenerate: .gitea/workflows/sync-renovate-configmap.sh
+# Verify:     .gitea/workflows/sync-renovate-configmap.sh --check
+apiVersion: v1
+kind: ConfigMap
+metadata:
+  name: renovate-config
+  namespace: renovate
+data:
+  renovate.json: |
+HEADER
+  sed 's/^/    /' "$src"
+}
+
+if [ "${1:-}" = "--check" ]; then
+  if ! diff -u "$dst" <(render) >/dev/null 2>&1; then
+    echo "ERROR: $dst is out of sync with renovate/renovate.json"
+    echo "Run: .gitea/workflows/sync-renovate-configmap.sh"
+    diff -u "$dst" <(render) || true
+    exit 1
+  fi
+  echo "renovate/k8s/configmap.yaml is in sync with renovate/renovate.json"
+  exit 0
+fi
+
+render >"$dst"
+echo "wrote $dst"

.gitea/workflows/tool-versions.env

@@ -0,0 +1,33 @@
+# Pinned versions of the CI tools installed by install-ci-tools.sh.
+# Renovate keeps these up to date (see customManagers in renovate/renovate.json).
+#
+# Every version here except NODE_VERSION matches what was already installed on
+# the runner, so pinning them changes what CI does not at all. It changes what
+# CI does when the runner is rebuilt with something else: today
+# install-ci-tools.sh finds the pinned version already on PATH and installs
+# nothing, and a runner that drifts gets the pinned one installed over it.
+#
+# The renovate image version is NOT pinned here: renovate/k8s/cronjob.yaml is the
+# single source of truth and the workflows read the tag from it, so there is
+# nothing to drift.
+ACTIONLINT_VERSION="1.7.7"
+SHELLCHECK_VERSION="0.11.0"
+KUBECONFORM_VERSION="0.8.0"
+PRETTIER_VERSION="3.8.1"
+RUFF_VERSION="0.16.8"
+YAMLLINT_VERSION="1.38.0"
+HADOLINT_VERSION="2.14.0"
+# pip-audit reads the advisory database over the network, so a floating version
+# would make the same commit report different things on different days. Pin it
+# like the rest: the advisories themselves are the moving part, not the tool.
+PIP_AUDIT_VERSION="2.10.1"
+# uv builds the throwaway venv the pytest job runs in, and unpacks the PyPI
+# wheels for ruff, yamllint and pip-audit.
+UV_VERSION="0.12.17"
+# node runs `npm ci` for the frontend tests and the npm audit, and it is the one
+# pin here that does NOT come from the runner: the runner's system node is a
+# rolling Arch package (it was node 26 with no npm at all when this was pinned),
+# and the panel image is node:22-alpine. Pinned to the image's major on purpose,
+# so the tree that gets tested is the tree that gets built. Renovate keeps this
+# in step with the Dockerfile's node: tag via the "node runtime" group.
+NODE_VERSION="22.23.3"

.gitignore

@@ -96,6 +96,8 @@ replacements.txt
 # Temp files
 edu_master/temp/
 temp/*
+# Local-only tooling scratch space (pinned CI tools, verification scripts)
+tmp/
 
 # Environment
 .env

cloudflared/k8s/deployment.yaml

@@ -16,7 +16,7 @@ spec:
     spec:
       containers:
         - name: cloudflared
-          image: cloudflare/cloudflared:2026.9.1
+          image: cloudflare/cloudflared:2026.9.3
           imagePullPolicy: IfNotPresent
           args:
             - tunnel

converters/compose.yaml

@@ -54,7 +54,7 @@ services:
       - "traefik.http.routers.bentopdf.tls.certresolver=letsencrypt"
       - "traefik.http.routers.bentopdf.tls=true"
       # Local router
-      - "traefik.http.routers.bentopdf-local.rule=Host(`pdf.wokstation.internal`)"
+      - "traefik.http.routers.bentopdf-local.rule=Host(`pdf.workstation.internal`)"
       - "traefik.http.routers.bentopdf-local.entrypoints=websecure"
       - "traefik.http.routers.bentopdf-local.tls=true"
       # Dev router

crowdsec/k8s/crowdsec-middleware.yaml

@@ -12,3 +12,13 @@ spec:
       CrowdsecLapiScheme: http
       CrowdsecLapiHost: crowdsec-service.crowdsec.svc.cluster.local:8080
       CrowdsecLapiKeyFile: "/etc/traefik/secrets/traefik-api-key"
+      # LAPI lookup is SYNCHRONOUS and per-request: the plugin blocks on
+      # `GET /v1/decisions?ip=...&banned=true` before the request reaches
+      # the backend, and fails CLOSED (403) if the lookup exceeds the
+      # timeout. Unset, the fork defaults to 10s, which is an eternity for
+      # a request path: a single slow LAPI (idle 1.3-7.4s here) turned
+      # every request into a 10s hang and then a self-inflicted 403.
+      # 2s keeps the fail-closed path fast and bounded; with the LAPI
+      # resourced properly (see crowdsec-values.yaml) the lookup is
+      # sub-100ms and this budget is never hit.
+      CrowdsecLapiTimeout: "2s"

crowdsec/k8s/crowdsec-values.yaml

@@ -68,6 +68,23 @@ config:
           reason: "Home dynamic IP"
           expression:
             - evt.Overflow.Alert.Source.IP in LookupHost("ddns.forust.xyz")
+      # The hairpin-NAT address of the router (192.168.88.1) is what the
+      # Gitea Actions runner presents to Traefik - it is NOT the home
+      # dynamic IP, so the whitelist above did not cover it. During a
+      # deploy the runner POSTs to the Actions API many times a second;
+      # a single 403 storm was enough to earn it a 4h ban and break every
+      # later job. Whitelisting the whole LAN also covers phones and
+      # tablets browsing over 192.168.88.0/24.
+      lan.yaml: |
+        name: forust/lan
+        description: "Whitelist local network"
+        whitelist:
+          reason: "Local network"
+          cidr:
+            - "127.0.0.0/8"
+            - "10.0.0.0/8"
+            - "172.16.0.0/12"
+            - "192.168.0.0/16"
 
 lapi:
   env:
@@ -90,13 +107,20 @@ lapi:
       enabled: true
       size: 1Gi
       storageClassName: local-path-retain
+  # LAPI answers a blocking /v1/decisions lookup for EVERY bouncer-protected
+  # request (whole Traefik front door), so it is the hot path of the proxy.
+  # At 400m/500Mi it went CPU-throttled and idle lookups measured 1.3-7.4s,
+  # which pushed requests into the bouncer's fail-closed 403.
+  # Single replica on purpose: LAPI is stateful (BoltDB on the `data` PVC,
+  # credentials on the `config` PVC) - two replicas sharing those RWO
+  # volumes would corrupt the decision store. Scale up CPU, not replicas.
   resources:
     limits:
-      cpu: 400m
+      cpu: 1500m
-      memory: 500Mi
+      memory: 1Gi
     requests:
-      cpu: 50m
+      cpu: 250m
-      memory: 150Mi
+      memory: 500Mi
   service:
     type: ClusterIP
   storeLAPICscliCredentialsInSecret: true

crowdsec/k8s/janitor-cronjob.yaml

@@ -30,7 +30,10 @@
 #       3. ensure the static machine exists, recreating it with the
 #          Secret password if missing (agent retry loops reconnect
 #          on their own - same name + same password);
-#       4. prune bouncer entries idle for 30d.
+#       4. prune bouncer entries idle for 30d;
+#       5. delete decisions from LePresidente/http-generic-403-bf, a hub
+#          scenario that bans an IP for 4h after 5 POST-403s in 10s and
+#          therefore bans us for our own bouncer's fail-closed 403s.
 #
 # Manual apply (crowdsec/k8s is NOT managed by deploy.yaml):
 #   kubectl apply -f crowdsec/k8s/janitor-cronjob.yaml
@@ -193,3 +196,19 @@ spec:
                   fi
                   echo "== 4. prune stale bouncers (no pull for 30d) =="
                   $LAPI_EXEC cscli bouncers prune -d 720h --force
+                  echo "== 5. drop http-403-bf decisions (4h self-bans) =="
+                  # `LePresidente/http-generic-403-bf` (hub item
+                  # crowdsecurity/http-generic-bf v0.9) bans any source IP
+                  # after 5 POSTs answered 403 within 10s, for 4h. That
+                  # includes 403s this homelab generates ITSELF (any
+                  # bouncer fail-closed, any app CSRF/rate-limit 403), and a
+                  # 4h ban on the runner/home IP silently breaks deploys and
+                  # browsing. The scenario cannot be removed per-scenario -
+                  # it is baked into a hub item, and disabling the whole
+                  # base-http-scenarios collection would drop ~40 useful
+                  # detections. Instead we keep the detection and drop its
+                  # decisions hourly; the LAN/home whitelists in
+                  # crowdsec-values.yaml handle the legit sources, so this
+                  # only ever hits real scanners (who are re-banned anyway).
+                  $LAPI_EXEC cscli decisions delete \
+                    --scenario LePresidente/http-generic-403-bf --all || true

edu_master/compose.yaml

@@ -1,6 +1,6 @@
 services:
   redis:
-    image: redis:8.10.1-alpine
+    image: redis:8.10.2-alpine
     restart: unless-stopped
     volumes:
       - redis-data:/data

edu_master/k8s/alerts.yaml

@@ -11,9 +11,14 @@ spec:
       rules:
         # No successful webinar check for 5m (~2-3 missed 2-min checks).
         # Catches: playwright hangs/timeouts, version skew, site changes, hung job.
+        # The last_success > 0 guard is mandatory: checker.py initialises
+        # last_success to 0, so without it `time() - 0` equals the current epoch
+        # and humanizeDuration renders ~20722d on every pod restart. Keep the
+        # duration expression on the left so $value stays the real gap.
         - alert: WebinarCheckerNoSuccessfulCheck
           expr: |
-            (time() - webinar_check_last_success_timestamp_seconds > 300)
+            ((time() - webinar_check_last_success_timestamp_seconds) > 300)
+              and (webinar_check_last_success_timestamp_seconds > 0)
               and (webinar_check_last_run_timestamp_seconds > 0)
           for: 2m
           labels:
@@ -22,6 +27,20 @@ spec:
             summary: "Webinar checker has no successful check for 5m"
             description: "edu-master/webinar-checker: last successful webinar check was {{ $value | humanizeDuration }} ago. Checks are failing or hanging (see consecutive failures alert). Notifications about new webinars are NOT being sent."
 
+        # Checks are running but none has ever succeeded since pod start.
+        # Split out from the rule above so a zeroed gauge never feeds
+        # humanizeDuration.
+        - alert: WebinarCheckerNeverSucceeded
+          expr: |
+            (webinar_check_last_success_timestamp_seconds == 0)
+              and (webinar_check_last_run_timestamp_seconds > 0)
+          for: 10m
+          labels:
+            severity: critical
+          annotations:
+            summary: "Webinar checker has never completed a successful check"
+            description: 'edu-master/webinar-checker: checks have been running for 10m but not one has ever succeeded since the pod started, so every check is failing. Check pod logs (Loki: {namespace="edu-master", container="webinar-checker"}).'
+
         # Fast path: 3 consecutive failures (~6+ min at 2-min interval).
         - alert: WebinarCheckerConsecutiveFailures
           expr: |

edu_master/k8s/redis.yaml

@@ -18,7 +18,7 @@ spec:
     spec:
       containers:
         - name: redis
-          image: redis:8.10.1-alpine
+          image: redis:8.10.2-alpine
           imagePullPolicy: IfNotPresent
           ports:
             - containerPort: 6379

edu_master/k8s/session-keeper.yaml

@@ -17,7 +17,7 @@ spec:
     spec:
       initContainers:
         - name: wait-redis
-          image: redis:8.10.1-alpine
+          image: redis:8.10.2-alpine
           command:
             - /bin/sh
             - -ec
@@ -31,8 +31,7 @@ spec:
               echo "redis is ready"
       containers:
         - name: session-keeper
-          image: gcr.forust.xyz/forust/session-keeper:latest
+          image: gcr.forust.xyz/forust/session-keeper:prod
-          imagePullPolicy: Always
           envFrom:
             - secretRef:
                 name: edu-master-secrets

edu_master/k8s/webinar-checker.yaml

@@ -19,7 +19,7 @@ spec:
       # redis healthy -> session-keeper healthy (EXISTS EDU_PHPSESSID) -> playwright started
       initContainers:
         - name: wait-deps
-          image: redis:8.10.1-alpine
+          image: redis:8.10.2-alpine
           command:
             - /bin/sh
             - -ec
@@ -45,12 +45,19 @@ spec:
               echo "playwright ok"
       containers:
         - name: webinar-checker
-          image: gcr.forust.xyz/forust/webinar-checker:latest
+          image: gcr.forust.xyz/forust/webinar-checker:prod
-          imagePullPolicy: Always
           ports:
             - name: metrics
               containerPort: 8000
               protocol: TCP
+          readinessProbe:
+            httpGet:
+              path: /health
+              port: metrics
+            periodSeconds: 10
+            timeoutSeconds: 3
+            failureThreshold: 12
+            initialDelaySeconds: 10
           envFrom:
             - secretRef:
                 name: edu-master-secrets

errorpages/k8s/error-pages.yaml

@@ -27,7 +27,14 @@ spec:
     spec:
       containers:
         - name: error-pages
-          image: gcr.forust.xyz/forust/error-pages:latest
+          image: gcr.forust.xyz/forust/error-pages:prod
           ports:
             - containerPort: 80
+          readinessProbe:
+            httpGet:
+              path: /404.html
+              port: 80
+            periodSeconds: 10
+            timeoutSeconds: 2
+            failureThreshold: 3
 ---

gitea/k8s/ingress.yaml

@@ -15,11 +15,18 @@ spec:
       services:
         - name: gitea-service
           port: 3000
+    # Registry route: NO crowdsec-bouncer.
+    # The bouncer plugin does a blocking `GET /v1/decisions` to the LAPI on
+    # *every* request. A deploy burst (runner Action API polls, `docker
+    # manifest inspect` per own image, containerd pulls, smoke probes) fires
+    # hundreds of parallel registry calls; LAPI saturation pushed the lookup
+    # past the plugin timeout, and the bouncer fail-closed with 403 - which
+    # containerd surfaces as ErrImagePull/ImagePullBackOff on the next pod.
+    # This route only serves authenticated OCI traffic (registry tokens,
+    # basic-auth already handled by gitea) and scanners get nothing useful
+    # from /v2, so there is no bruteforce surface to protect here.
     - match: Host(`gcr.forust.xyz`) && PathPrefix(`/v2`)
       kind: Rule
-      middlewares:
-        - name: crowdsec-bouncer
-          namespace: crowdsec
       services:
         - name: gitea-service
           port: 3000

headscale/compose.yaml

@@ -1,6 +1,6 @@
 services:
   headscale:
-    image: headscale/headscale:0.29.3
+    image: headscale/headscale:v0.29.4
     restart: unless-stopped
     container_name: headscale-server
     command: serve

homepages/k8s/homepages.yaml

@@ -27,10 +27,16 @@ spec:
     spec:
       containers:
         - name: forust-homepage
-          image: gcr.forust.xyz/forust/forust-homepage:latest
+          image: gcr.forust.xyz/forust/forust-homepage:prod
-          imagePullPolicy: Always
           ports:
             - containerPort: 80
+          readinessProbe:
+            httpGet:
+              path: /
+              port: 80
+            periodSeconds: 10
+            timeoutSeconds: 2
+            failureThreshold: 3
           resources:
             requests:
               memory: "10Mi"
@@ -68,10 +74,16 @@ spec:
     spec:
       containers:
         - name: xdfnx-homepage
-          image: gcr.forust.xyz/forust/xdfnx-homepage:latest
+          image: gcr.forust.xyz/forust/xdfnx-homepage:prod
-          imagePullPolicy: Always
           ports:
             - containerPort: 80
+          readinessProbe:
+            httpGet:
+              path: /
+              port: 80
+            periodSeconds: 10
+            timeoutSeconds: 2
+            failureThreshold: 3
           resources:
             requests:
               memory: "10Mi"

kener/compose.yaml

@@ -36,7 +36,7 @@ services:
       - proxy
       - kener
   redis:
-    image: redis:8.10.1-alpine
+    image: redis:8.10.2-alpine
     container_name: kener-redis
     restart: unless-stopped
     volumes:

kener/k8s/redis.yaml

@@ -30,7 +30,7 @@ spec:
     spec:
       containers:
         - name: redis
-          image: redis:8.10.1-alpine
+          image: redis:8.10.2-alpine
           ports:
             - containerPort: 6379
           volumeMounts:

metube/compose.yaml

@@ -1,6 +1,6 @@
 services:
   metube:
-    image: ghcr.io/alexta69/metube:2026.09.15
+    image: ghcr.io/alexta69/metube:2026.09.27
     container_name: metube
     restart: unless-stopped
     # ports:

metube/k8s/metube.yaml

@@ -27,7 +27,7 @@ spec:
     spec:
       containers:
         - name: metube
-          image: ghcr.io/alexta69/metube:2026.09.15
+          image: ghcr.io/alexta69/metube:2026.09.27
           envFrom:
             - configMapRef:
                 name: metube-config

n8n/compose.yaml

@@ -1,6 +1,6 @@
 services:
   n8n:
-    image: docker.n8n.io/n8nio/n8n:2.41.0
+    image: docker.n8n.io/n8nio/n8n:2.41.3
     container_name: n8n
     restart: unless-stopped
     environment:

n8n/k8s/n8n.yaml

@@ -27,7 +27,7 @@ spec:
     spec:
       containers:
         - name: n8n
-          image: docker.n8n.io/n8nio/n8n:2.41.0
+          image: docker.n8n.io/n8nio/n8n:2.41.3
           envFrom:
             - configMapRef:
                 name: n8n-config

netbird/compose.yaml

@@ -87,7 +87,7 @@ services:
       - proxy
 
   dashboard:
-    image: netbirdio/dashboard:v2.90.10
+    image: netbirdio/dashboard:v2.93.0
     container_name: netbird-dashboard
     restart: unless-stopped
     environment:

netbird/k8s/netbird.yaml

@@ -137,7 +137,7 @@ spec:
     spec:
       containers:
         - name: dashboard
-          image: netbirdio/dashboard:v2.90.10
+          image: netbirdio/dashboard:v2.93.0
           envFrom:
             - configMapRef:
                 name: netbird-config

netbox/configuration/configuration.py

@@ -1,48 +1,48 @@
 import os
 
 
-def _csv(name, default=""):
+def _csv(name, default=''):
-    return [item.strip() for item in os.environ.get(name, default).split(",") if item.strip()]
+    return [item.strip() for item in os.environ.get(name, default).split(',') if item.strip()]
 
 
-ALLOWED_HOSTS = _csv("ALLOWED_HOSTS", "localhost,127.0.0.1,[::1]")
+ALLOWED_HOSTS = _csv('ALLOWED_HOSTS', 'localhost,127.0.0.1,[::1]')
-CSRF_TRUSTED_ORIGINS = _csv("CSRF_TRUSTED_ORIGINS")
+CSRF_TRUSTED_ORIGINS = _csv('CSRF_TRUSTED_ORIGINS')
 USE_X_FORWARDED_HOST = True
-SECURE_PROXY_SSL_HEADER = ("HTTP_X_FORWARDED_PROTO", "https")
+SECURE_PROXY_SSL_HEADER = ('HTTP_X_FORWARDED_PROTO', 'https')
 
 DATABASES = {
-    "default": {
+    'default': {
-        "NAME": os.environ["DB_NAME"],
+        'NAME': os.environ['DB_NAME'],
-        "USER": os.environ["DB_USER"],
+        'USER': os.environ['DB_USER'],
-        "PASSWORD": os.environ["DB_PASSWORD"],
+        'PASSWORD': os.environ['DB_PASSWORD'],
-        "HOST": os.environ["DB_HOST"],
+        'HOST': os.environ['DB_HOST'],
-        "PORT": os.environ.get("DB_PORT", "5432"),
+        'PORT': os.environ.get('DB_PORT', '5432'),
-        "OPTIONS": {"sslmode": os.environ.get("DB_SSLMODE", "disable")},
+        'OPTIONS': {'sslmode': os.environ.get('DB_SSLMODE', 'disable')},
-        "CONN_MAX_AGE": int(os.environ.get("DB_CONN_MAX_AGE", "300")),
+        'CONN_MAX_AGE': int(os.environ.get('DB_CONN_MAX_AGE', '300')),
     }
 }
 
 REDIS = {
-    "tasks": {
+    'tasks': {
-        "HOST": os.environ["REDIS_HOST"],
+        'HOST': os.environ['REDIS_HOST'],
-        "PORT": int(os.environ.get("REDIS_PORT", "6379")),
+        'PORT': int(os.environ.get('REDIS_PORT', '6379')),
-        "PASSWORD": os.environ["REDIS_PASSWORD"],
+        'PASSWORD': os.environ['REDIS_PASSWORD'],
-        "DATABASE": int(os.environ.get("REDIS_DATABASE", "0")),
+        'DATABASE': int(os.environ.get('REDIS_DATABASE', '0')),
-        "SSL": False,
+        'SSL': False,
     },
-    "caching": {
+    'caching': {
-        "HOST": os.environ["REDIS_CACHE_HOST"],
+        'HOST': os.environ['REDIS_CACHE_HOST'],
-        "PORT": int(os.environ.get("REDIS_CACHE_PORT", "6379")),
+        'PORT': int(os.environ.get('REDIS_CACHE_PORT', '6379')),
-        "PASSWORD": os.environ["REDIS_CACHE_PASSWORD"],
+        'PASSWORD': os.environ['REDIS_CACHE_PASSWORD'],
-        "DATABASE": int(os.environ.get("REDIS_CACHE_DATABASE", "1")),
+        'DATABASE': int(os.environ.get('REDIS_CACHE_DATABASE', '1')),
-        "SSL": False,
+        'SSL': False,
     },
 }
 
-SECRET_KEY = os.environ["SECRET_KEY"]
+SECRET_KEY = os.environ['SECRET_KEY']
-API_TOKEN_PEPPERS = {1: os.environ["API_TOKEN_PEPPER_1"]}
+API_TOKEN_PEPPERS = {1: os.environ['API_TOKEN_PEPPER_1']}
-TIME_ZONE = os.environ.get("TIME_ZONE", "UTC")
+TIME_ZONE = os.environ.get('TIME_ZONE', 'UTC')
-MEDIA_ROOT = "/opt/netbox/netbox/media"
+MEDIA_ROOT = '/opt/netbox/netbox/media'
-REPORTS_ROOT = "/opt/netbox/netbox/reports"
+REPORTS_ROOT = '/opt/netbox/netbox/reports'
-SCRIPTS_ROOT = "/opt/netbox/netbox/scripts"
+SCRIPTS_ROOT = '/opt/netbox/netbox/scripts'
 CENSUS_REPORTING_ENABLED = False

netbox/k8s/netbox.yaml

@@ -56,33 +56,42 @@ spec:
           startupProbe:
             exec:
               command:
-                - /opt/netbox/venv/bin/python
+                - /usr/bin/curl
-                - -c
+                - --fail
-                - >-
+                - --silent
-                  exec /usr/bin/curl --fail --silent --show-error --max-time 4
+                - --show-error
-                  --header 'Host: netbox.forust.xyz'
+                - --max-time
-                  http://127.0.0.1:8080/login/ >/dev/null
+                - "4"
+                - --header
+                - "Host: netbox.forust.xyz"
+                - http://127.0.0.1:8080/login/
             failureThreshold: 90
             periodSeconds: 10
           readinessProbe:
             exec:
               command:
-                - /opt/netbox/venv/bin/python
+                - /usr/bin/curl
-                - -c
+                - --fail
-                - >-
+                - --silent
-                  exec /usr/bin/curl --fail --silent --show-error --max-time 4
+                - --show-error
-                  --header 'Host: netbox.forust.xyz'
+                - --max-time
-                  http://127.0.0.1:8080/login/ >/dev/null
+                - "4"
+                - --header
+                - "Host: netbox.forust.xyz"
+                - http://127.0.0.1:8080/login/
             periodSeconds: 10
           livenessProbe:
             exec:
               command:
-                - /opt/netbox/venv/bin/python
+                - /usr/bin/curl
-                - -c
+                - --fail
-                - >-
+                - --silent
-                  exec /usr/bin/curl --fail --silent --show-error --max-time 4
+                - --show-error
-                  --header 'Host: netbox.forust.xyz'
+                - --max-time
-                  http://127.0.0.1:8080/login/ >/dev/null
+                - "4"
+                - --header
+                - "Host: netbox.forust.xyz"
+                - http://127.0.0.1:8080/login/
             initialDelaySeconds: 30
             periodSeconds: 30
           resources:

netronome/compose.yaml

@@ -1,6 +1,6 @@
 services:
   netronome:
-    image: ghcr.io/autobrr/netronome:v0.14.0
+    image: ghcr.io/autobrr/netronome:v0.14.1
     restart: unless-stopped
     container_name: netronome
     ports:

netronome/k8s/netronome.yaml

@@ -30,7 +30,7 @@ spec:
     spec:
       containers:
         - name: netronome
-          image: ghcr.io/autobrr/netronome:v0.14.0
+          image: ghcr.io/autobrr/netronome:v0.14.1
           ports:
             - name: netronome-port
               protocol: TCP

prometheus-stack/compose.yaml

@@ -30,7 +30,7 @@ services:
       - proxy
 
   prometheus:
-    image: prom/prometheus:v3.14.0
+    image: prom/prometheus:v3.15.0
     container_name: prometheus-prometheus
     restart: unless-stopped
     command:

prometheus-stack/k8s/grafana-values.yaml

@@ -69,3 +69,18 @@ alertmanager:
 defaultRules:
   disabled:
     CPUThrottlingHigh: true
+    KubeControllerManagerDown: true
+    KubeSchedulerDown: true
+    KubeEtcdDown: true
+    KubeEtcdHighCommitDurations: true
+
+# k0s runs controller-manager/scheduler/etcd internally, not as pods with
+# component=kube-controller-manager/kube-scheduler/k8s-app=kube-etcd labels.
+# Their Services get no endpoints, so the targets are permanently down.
+# kube-proxy and kubelet have endpoints on k0s, keep them enabled.
+kubeControllerManager:
+  enabled: false
+kubeScheduler:
+  enabled: false
+kubeEtcd:
+  enabled: false

reloader/k8s/reloader-values.yaml

@@ -0,0 +1,20 @@
+# Pinned chart: stakater/reloader 2.2.17 (app v1.4.22).
+# Deployed by the deploy workflow, namespace reloader.
+# Restarts pods when a ConfigMap or Secret they consume changes. Opt-in per workload
+# via the reloader.stakater.com/auto: "true" pod annotation; watchGlobally because
+# the workloads that need it are spread across a few dozen namespaces.
+
+reloader:
+  watchGlobally: true
+
+  deployment:
+    replicas: 1
+    # The chart defaults to no requests or limits, so the pod is evictable under node
+    # pressure and the restarts go with it.
+    resources:
+      requests:
+        cpu: "10m"
+        memory: "64Mi"
+      limits:
+        cpu: "100m"
+        memory: "128Mi"

renovate.json

@@ -1,60 +0,0 @@
-{
-  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
-  "extends": ["config:recommended"],
-  "enabledManagers": ["dockerfile", "docker-compose", "kubernetes", "helm-values", "custom.regex"],
-  "helm-values": {
-    "managerFilePatterns": ["/k8s/.+values\\.ya?ml$/"]
-  },
-  "kubernetes": {
-    "managerFilePatterns": ["/k8s/.+\\.ya?ml$/"]
-  },
-  "customManagers": [
-    {
-      "customType": "regex",
-      "description": "singlesource: playwright npm version pinned in npx command (k8s + compose)",
-      "fileMatch": ["^edu_master/k8s/playwright\\.yaml$", "^edu_master/compose\\.yaml$"],
-      "matchStrings": ["playwright@(?<currentValue>\\d+\\.\\d+\\.\\d+)"],
-      "datasourceTemplate": "npm",
-      "depNameTemplate": "playwright"
-    },
-    {
-      "customType": "regex",
-      "description": "singlesource: PLAYWRIGHT_VERSION file",
-      "fileMatch": ["^edu_master/PLAYWRIGHT_VERSION$"],
-      "matchStrings": ["^(?<currentValue>\\d+\\.\\d+\\.\\d+)$"],
-      "datasourceTemplate": "pypi",
-      "depNameTemplate": "playwright"
-    }
-  ],
-  "packageRules": [
-    {
-      "description": "singlesource playwright - use whichever version is found, keep docker+pypi+npm in sync",
-      "matchPackageNames": ["playwright", "mcr.microsoft.com/playwright"],
-      "groupName": "playwright singlesource",
-      "groupSlug": "playwright"
-    },
-    {
-      "description": "playwright must not automerge - version skew breaks WS handshake (checker.py:1523 vs playwright.yaml:20)",
-      "matchPackageNames": ["playwright", "mcr.microsoft.com/playwright"],
-      "automerge": false
-    },
-    {
-      "description": "Keep private homelab images unchanged",
-      "matchDatasources": ["docker"],
-      "matchPackageNames": ["/gcr\\.forust\\.xyz\\/forust\\/.+/"],
-      "enabled": false
-    },
-    {
-      "description": "Require approval for major upgrades",
-      "matchUpdateTypes": ["major"],
-      "dependencyDashboardApproval": true,
-      "automerge": false
-    },
-    {
-      "description": "Group container patch updates",
-      "matchDatasources": ["docker"],
-      "matchUpdateTypes": ["patch"],
-      "groupName": "container patch updates"
-    }
-  ]
-}

renovate/README.md

@@ -26,15 +26,17 @@ from Git and must be applied separately after every new cluster.
 
 Run it immediately instead of waiting for the six-hour schedule.
 
-Two options, both use the same `renovate/config.js`:
+Two options, both use the same `renovate/renovate.json`:
 
 ```sh
 kubectl create job --from=cronjob/renovate renovate-manual-$(date +%s) -n renovate
 ```
 
 or the `renovate-run` Actions workflow (Actions tab → `renovate-run` →
-Run workflow). It runs `renovate/renovate:44.103.0` on the self-hosted
+Run workflow). It runs the same image as the CronJob on the self-hosted runner
-runner via Docker. Required Actions secrets (repo or org settings):
+via Docker — the tag is read out of `renovate/k8s/cronjob.yaml` at run time
+rather than hardcoded, so the two cannot drift apart. Required Actions secrets
+(repo or org settings):
 
 - `RENOVATE_TOKEN` — renovate-bot PAT (repository + issue read/write).
 - `RENOVATE_GITHUB_COM_TOKEN` — optional, for changelogs and GitHub rate limits.
@@ -64,6 +66,33 @@ docker compose -f renovate-compose.yaml run --rm renovate
 The Compose file is intentionally named `renovate-compose.yaml`, so the
 repository's automatic deployment discovery does not start it accidentally.
 
+## Configuration
+
+`renovate/renovate.json` is the single source of truth. The Compose file and the
+`renovate-run` workflow mount that file directly.
+
+A ConfigMap cannot read from the repository, so the CronJob needs the config
+inlined. `renovate/k8s/configmap.yaml` is therefore a **generated** copy:
+
+```sh
+.gitea/workflows/sync-renovate-configmap.sh          # regenerate after editing
+.gitea/workflows/sync-renovate-configmap.sh --check  # fail if out of date
+```
+
+The `renovate-ci` workflow runs the `--check` form on every PR and push, so a
+config edit that forgets to regenerate the ConfigMap cannot be merged.
+
+Beyond images, `customManagers` in the config track:
+
+- Helm chart versions pinned in `.gitea/workflows/deploy-lib.sh`. The built-in
+  `helmv3` manager only reads `Chart.yaml` and `helm-values` only reads values
+  files, so neither sees a version written into a `helm upgrade` command —
+  these are declared as `custom.regex` managers against the `helm` datasource.
+- CI linter versions in `.gitea/workflows/tool-versions.env`.
+
+The Renovate image tag is deliberately _not_ in `tool-versions.env`:
+`renovate/k8s/cronjob.yaml` owns it, and the workflows read it from there.
+
 ## How updates flow
 
 Renovate scans both `compose.yaml` files and Kubernetes manifests, opens a

renovate/config.js

@@ -1,44 +0,0 @@
-module.exports = {
-  platform: 'gitea',
-  endpoint: process.env.RENOVATE_ENDPOINT || 'https://gitea.forust.xyz/api/v1',
-  enabledManagers: ['docker-compose', 'kubernetes', 'helm-values'],
-  'helm-values': {
-    managerFilePatterns: ['/k8s/.+values\\.ya?ml$/'],
-  },
-  kubernetes: {
-    managerFilePatterns: ['/k8s/.+\\.ya?ml$/'],
-  },
-  repositories: (process.env.RENOVATE_REPOSITORIES || '')
-    .split(',')
-    .map((repository) => repository.trim())
-    .filter(Boolean),
-  onboarding: false,
-  requireConfig: 'optional',
-  autodiscover: false,
-  dependencyDashboard: true,
-  prCreation: 'immediate',
-  labels: ['dependencies', 'automated'],
-  extends: [
-    'config:recommended',
-    ':dependencyDashboard',
-  ],
-  packageRules: [
-    {
-      description: 'Do not update private homelab images',
-      matchDatasources: ['docker'],
-      matchPackageNames: ['/gcr\\.forust\\.xyz\\/forust\\/.+/'],
-      enabled: false,
-    },
-    {
-      description: 'Keep major upgrades manual',
-      matchUpdateTypes: ['major'],
-      dependencyDashboardApproval: true,
-      automerge: false,
-    },
-    {
-      description: 'Group patch updates',
-      matchUpdateTypes: ['patch'],
-      groupName: 'container patch updates',
-    },
-  ],
-};

renovate/k8s/configmap.yaml

@@ -1,51 +1,211 @@
+# GENERATED FILE - do not edit by hand.
+# Source: renovate/renovate.json
+# Regenerate: .gitea/workflows/sync-renovate-configmap.sh
+# Verify:     .gitea/workflows/sync-renovate-configmap.sh --check
 apiVersion: v1
 kind: ConfigMap
 metadata:
   name: renovate-config
   namespace: renovate
 data:
-  config.js: |
+  renovate.json: |
-    module.exports = {
+    {
-      platform: 'gitea',
+      "$schema": "https://docs.renovatebot.com/renovate-schema.json",
-      endpoint: process.env.RENOVATE_ENDPOINT || 'https://gitea.forust.xyz/api/v1',
+      "extends": ["config:recommended", ":dependencyDashboard"],
-      enabledManagers: ['docker-compose', 'kubernetes', 'helm-values'],
+      "enabledManagers": ["dockerfile", "docker-compose", "kubernetes", "helm-values", "custom.regex"],
-      'helm-values': {
+      "onboarding": false,
-        managerFilePatterns: ['/k8s/.+values\\.ya?ml$/'],
+      "requireConfig": "optional",
+      "autodiscover": false,
+      "dependencyDashboard": true,
+      "prCreation": "immediate",
+      "labels": ["dependencies", "automated"],
+      "helm-values": {
+        "managerFilePatterns": ["/k8s/.+values\\.ya?ml$/"]
       },
-      kubernetes: {
+      "kubernetes": {
-        managerFilePatterns: ['/k8s/.+\\.ya?ml$/'],
+        "managerFilePatterns": ["/k8s/.+\\.ya?ml$/"]
       },
-      repositories: (process.env.RENOVATE_REPOSITORIES || '')
+      "customManagers": [
-        .split(',')
+        {
-        .map((repository) => repository.trim())
+          "customType": "regex",
-        .filter(Boolean),
+          "description": "singlesource: playwright npm version pinned in npx command (k8s + compose)",
-      onboarding: false,
+          "managerFilePatterns": ["^edu_master/k8s/playwright\\.yaml$", "^edu_master/compose\\.yaml$"],
-      requireConfig: 'optional',
+          "matchStrings": ["playwright@(?<currentValue>\\d+\\.\\d+\\.\\d+)"],
-      autodiscover: false,
+          "datasourceTemplate": "npm",
-      dependencyDashboard: true,
+          "depNameTemplate": "playwright"
-      prCreation: 'immediate',
+        },
-      labels: ['dependencies', 'automated'],
+        {
-      extends: [
+          "customType": "regex",
-        'config:recommended',
+          "description": "singlesource: PLAYWRIGHT_VERSION file",
-        ':dependencyDashboard',
+          "managerFilePatterns": ["^edu_master/PLAYWRIGHT_VERSION$"],
+          "matchStrings": ["^(?<currentValue>\\d+\\.\\d+\\.\\d+)$"],
+          "datasourceTemplate": "pypi",
+          "depNameTemplate": "playwright"
+        },
+        {
+          "customType": "regex",
+          "description": "kube-prometheus-stack chart version pinned in the deploy workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+          "matchStrings": ["\\|prometheus-community/kube-prometheus-stack\\|prometheus\\|(?<currentValue>[0-9.]+)\\|"],
+          "datasourceTemplate": "helm",
+          "depNameTemplate": "kube-prometheus-stack",
+          "registryUrlTemplate": "https://prometheus-community.github.io/helm-charts"
+        },
+        {
+          "customType": "regex",
+          "description": "grafana/loki chart version pinned in the deploy workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+          "matchStrings": ["\\|grafana/loki\\|prometheus\\|(?<currentValue>[0-9.]+)\\|"],
+          "datasourceTemplate": "helm",
+          "depNameTemplate": "loki",
+          "registryUrlTemplate": "https://grafana.github.io/helm-charts"
+        },
+        {
+          "customType": "regex",
+          "description": "grafana/alloy chart version pinned in the deploy workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+          "matchStrings": ["\\|grafana/alloy\\|prometheus\\|(?<currentValue>[0-9.]+)\\|"],
+          "datasourceTemplate": "helm",
+          "depNameTemplate": "alloy",
+          "registryUrlTemplate": "https://grafana.github.io/helm-charts"
+        },
+        {
+          "customType": "regex",
+          "description": "actionlint version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)ACTIONLINT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "github-tags",
+          "depNameTemplate": "rhysd/actionlint"
+        },
+        {
+          "customType": "regex",
+          "description": "shellcheck version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)SHELLCHECK_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "github-tags",
+          "depNameTemplate": "koalaman/shellcheck"
+        },
+        {
+          "customType": "regex",
+          "description": "kubeconform version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)KUBECONFORM_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "github-tags",
+          "depNameTemplate": "yannh/kubeconform"
+        },
+        {
+          "customType": "regex",
+          "description": "uv version used to build the pytest venv",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)UV_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "github-tags",
+          "depNameTemplate": "astral-sh/uv"
+        },
+        {
+          "customType": "regex",
+          "description": "prettier version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)PRETTIER_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "npm",
+          "depNameTemplate": "prettier"
+        },
+        {
+          "customType": "regex",
+          "description": "ruff version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)RUFF_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "pypi",
+          "depNameTemplate": "ruff"
+        },
+        {
+          "customType": "regex",
+          "description": "pip-audit version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)PIP_AUDIT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "pypi",
+          "depNameTemplate": "pip-audit"
+        },
+        {
+          "customType": "regex",
+          "description": "yamllint version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)YAMLLINT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "pypi",
+          "depNameTemplate": "yamllint"
+        },
+        {
+          "customType": "regex",
+          "description": "hadolint version used by the ci workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)HADOLINT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "github-tags",
+          "depNameTemplate": "hadolint/hadolint"
+        },
+        {
+          "customType": "regex",
+          "description": "node version the ci workflow runs npm with",
+          "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+          "matchStrings": ["(?:^|\\n)NODE_VERSION=\"(?<currentValue>[0-9.]+)\""],
+          "datasourceTemplate": "node",
+          "depNameTemplate": "node"
+        },
+        {
+          "customType": "regex",
+          "description": "stakater/reloader chart version pinned in the deploy workflow",
+          "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+          "matchStrings": ["\\|stakater/reloader\\|reloader\\|(?<currentValue>[0-9.]+)\\|"],
+          "datasourceTemplate": "helm",
+          "depNameTemplate": "reloader",
+          "registryUrlTemplate": "https://stakater.github.io/stakater-charts"
+        }
       ],
-      packageRules: [
+      "packageRules": [
         {
-          description: 'Do not update private homelab images',
+          "description": "Keep private homelab images unchanged",
-          matchDatasources: ['docker'],
+          "matchDatasources": ["docker"],
-          matchPackageNames: ['/gcr\\.forust\\.xyz\\/forust\\/.+/'],
+          "matchPackageNames": ["/gcr\\.forust\\.xyz\\/forust\\/.+/"],
-          enabled: false,
+          "enabled": false
         },
         {
-          description: 'Keep major upgrades manual',
+          "description": "singlesource playwright - use whichever version is found, keep docker+pypi+npm in sync",
-          matchUpdateTypes: ['major'],
+          "matchPackageNames": ["playwright", "mcr.microsoft.com/playwright"],
-          dependencyDashboardApproval: true,
+          "groupName": "playwright singlesource",
-          automerge: false,
+          "groupSlug": "playwright"
         },
         {
-          description: 'Group patch updates',
+          "description": "playwright must not automerge - version skew breaks the WS handshake (checker.py:1523 vs playwright.yaml:20)",
-          matchUpdateTypes: ['patch'],
+          "matchPackageNames": ["playwright", "mcr.microsoft.com/playwright"],
-          groupName: 'container patch updates',
+          "automerge": false
         },
-      ],
+        {
-    };
+          "description": "Renovate updates itself in lockstep across the CronJob and the Compose file",
+          "matchPackageNames": ["renovate/renovate"],
+          "groupName": "renovate self-update",
+          "automerge": false
+        },
+        {
+          "description": "CI runs npm on the node the panel image is built from - the NODE_VERSION pin in tool-versions.env and node:22-alpine in the Dockerfile are the same dependency and move as one",
+          "matchPackageNames": ["node"],
+          "groupName": "node runtime",
+          "groupSlug": "node",
+          "automerge": false
+        },
+        {
+          "description": "Helm chart bumps change PVC fields and admission behaviour, keep them reviewable",
+          "matchDatasources": ["helm"],
+          "automerge": false
+        },
+        {
+          "description": "Require approval for major upgrades",
+          "matchUpdateTypes": ["major"],
+          "dependencyDashboardApproval": true,
+          "automerge": false
+        },
+        {
+          "description": "Group container patch updates",
+          "matchDatasources": ["docker"],
+          "matchUpdateTypes": ["patch"],
+          "groupName": "container patch updates"
+        }
+      ]
+    }

renovate/k8s/cronjob.yaml

@@ -16,7 +16,7 @@ spec:
           restartPolicy: Never
           containers:
             - name: renovate
-              image: renovate/renovate:44.106.0
+              image: renovate/renovate:44.115.13
               env:
                 - name: RENOVATE_PLATFORM
                   value: gitea
@@ -36,7 +36,7 @@ spec:
                       name: renovate-secrets
                       key: RENOVATE_REPOSITORIES
                 - name: RENOVATE_CONFIG_FILE
-                  value: /opt/renovate/config.js
+                  value: /opt/renovate/renovate.json
                 - name: RENOVATE_BASE_DIR
                   value: /tmp/renovate
                 - name: RENOVATE_GITHUB_COM_TOKEN
@@ -49,8 +49,8 @@ spec:
                   value: info
               volumeMounts:
                 - name: config
-                  mountPath: /opt/renovate/config.js
+                  mountPath: /opt/renovate/renovate.json
-                  subPath: config.js
+                  subPath: renovate.json
                   readOnly: true
           volumes:
             - name: config

renovate/renovate-compose.yaml

@@ -1,6 +1,8 @@
 services:
   renovate:
-    image: renovate/renovate:44.103.0
+    # Kept in step with renovate/k8s/cronjob.yaml by the "renovate self-update"
+    # package rule in renovate/renovate.json.
+    image: renovate/renovate:44.115.9
     container_name: renovate
     restart: "no"
     env_file:
@@ -10,8 +12,8 @@ services:
       RENOVATE_ENDPOINT: ${RENOVATE_ENDPOINT:?set RENOVATE_ENDPOINT}
       RENOVATE_TOKEN: ${RENOVATE_TOKEN:?set RENOVATE_TOKEN}
       RENOVATE_REPOSITORIES: ${RENOVATE_REPOSITORIES:?set RENOVATE_REPOSITORIES}
-      RENOVATE_CONFIG_FILE: /opt/renovate/config.js
+      RENOVATE_CONFIG_FILE: /opt/renovate/renovate.json
       RENOVATE_BASE_DIR: /tmp/renovate
       LOG_LEVEL: ${LOG_LEVEL:-info}
     volumes:
-      - ./config.js:/opt/renovate/config.js:ro
+      - ./renovate.json:/opt/renovate/renovate.json:ro

renovate/renovate.json

@@ -0,0 +1,200 @@
+{
+  "$schema": "https://docs.renovatebot.com/renovate-schema.json",
+  "extends": ["config:recommended", ":dependencyDashboard"],
+  "enabledManagers": ["dockerfile", "docker-compose", "kubernetes", "helm-values", "custom.regex"],
+  "onboarding": false,
+  "requireConfig": "optional",
+  "autodiscover": false,
+  "dependencyDashboard": true,
+  "prCreation": "immediate",
+  "labels": ["dependencies", "automated"],
+  "helm-values": {
+    "managerFilePatterns": ["/k8s/.+values\\.ya?ml$/"]
+  },
+  "kubernetes": {
+    "managerFilePatterns": ["/k8s/.+\\.ya?ml$/"]
+  },
+  "customManagers": [
+    {
+      "customType": "regex",
+      "description": "singlesource: playwright npm version pinned in npx command (k8s + compose)",
+      "managerFilePatterns": ["^edu_master/k8s/playwright\\.yaml$", "^edu_master/compose\\.yaml$"],
+      "matchStrings": ["playwright@(?<currentValue>\\d+\\.\\d+\\.\\d+)"],
+      "datasourceTemplate": "npm",
+      "depNameTemplate": "playwright"
+    },
+    {
+      "customType": "regex",
+      "description": "singlesource: PLAYWRIGHT_VERSION file",
+      "managerFilePatterns": ["^edu_master/PLAYWRIGHT_VERSION$"],
+      "matchStrings": ["^(?<currentValue>\\d+\\.\\d+\\.\\d+)$"],
+      "datasourceTemplate": "pypi",
+      "depNameTemplate": "playwright"
+    },
+    {
+      "customType": "regex",
+      "description": "kube-prometheus-stack chart version pinned in the deploy workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+      "matchStrings": ["\\|prometheus-community/kube-prometheus-stack\\|prometheus\\|(?<currentValue>[0-9.]+)\\|"],
+      "datasourceTemplate": "helm",
+      "depNameTemplate": "kube-prometheus-stack",
+      "registryUrlTemplate": "https://prometheus-community.github.io/helm-charts"
+    },
+    {
+      "customType": "regex",
+      "description": "grafana/loki chart version pinned in the deploy workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+      "matchStrings": ["\\|grafana/loki\\|prometheus\\|(?<currentValue>[0-9.]+)\\|"],
+      "datasourceTemplate": "helm",
+      "depNameTemplate": "loki",
+      "registryUrlTemplate": "https://grafana.github.io/helm-charts"
+    },
+    {
+      "customType": "regex",
+      "description": "grafana/alloy chart version pinned in the deploy workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+      "matchStrings": ["\\|grafana/alloy\\|prometheus\\|(?<currentValue>[0-9.]+)\\|"],
+      "datasourceTemplate": "helm",
+      "depNameTemplate": "alloy",
+      "registryUrlTemplate": "https://grafana.github.io/helm-charts"
+    },
+    {
+      "customType": "regex",
+      "description": "actionlint version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)ACTIONLINT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "github-tags",
+      "depNameTemplate": "rhysd/actionlint"
+    },
+    {
+      "customType": "regex",
+      "description": "shellcheck version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)SHELLCHECK_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "github-tags",
+      "depNameTemplate": "koalaman/shellcheck"
+    },
+    {
+      "customType": "regex",
+      "description": "kubeconform version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)KUBECONFORM_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "github-tags",
+      "depNameTemplate": "yannh/kubeconform"
+    },
+    {
+      "customType": "regex",
+      "description": "uv version used to build the pytest venv",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)UV_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "github-tags",
+      "depNameTemplate": "astral-sh/uv"
+    },
+    {
+      "customType": "regex",
+      "description": "prettier version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)PRETTIER_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "npm",
+      "depNameTemplate": "prettier"
+    },
+    {
+      "customType": "regex",
+      "description": "ruff version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)RUFF_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "pypi",
+      "depNameTemplate": "ruff"
+    },
+    {
+      "customType": "regex",
+      "description": "pip-audit version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)PIP_AUDIT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "pypi",
+      "depNameTemplate": "pip-audit"
+    },
+    {
+      "customType": "regex",
+      "description": "yamllint version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)YAMLLINT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "pypi",
+      "depNameTemplate": "yamllint"
+    },
+    {
+      "customType": "regex",
+      "description": "hadolint version used by the ci workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)HADOLINT_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "github-tags",
+      "depNameTemplate": "hadolint/hadolint"
+    },
+    {
+      "customType": "regex",
+      "description": "node version the ci workflow runs npm with",
+      "managerFilePatterns": ["^\\.gitea/workflows/tool-versions\\.env$"],
+      "matchStrings": ["(?:^|\\n)NODE_VERSION=\"(?<currentValue>[0-9.]+)\""],
+      "datasourceTemplate": "node",
+      "depNameTemplate": "node"
+    },
+    {
+      "customType": "regex",
+      "description": "stakater/reloader chart version pinned in the deploy workflow",
+      "managerFilePatterns": ["^\\.gitea/workflows/deploy-lib\\.sh$"],
+      "matchStrings": ["\\|stakater/reloader\\|reloader\\|(?<currentValue>[0-9.]+)\\|"],
+      "datasourceTemplate": "helm",
+      "depNameTemplate": "reloader",
+      "registryUrlTemplate": "https://stakater.github.io/stakater-charts"
+    }
+  ],
+  "packageRules": [
+    {
+      "description": "Keep private homelab images unchanged",
+      "matchDatasources": ["docker"],
+      "matchPackageNames": ["/gcr\\.forust\\.xyz\\/forust\\/.+/"],
+      "enabled": false
+    },
+    {
+      "description": "singlesource playwright - use whichever version is found, keep docker+pypi+npm in sync",
+      "matchPackageNames": ["playwright", "mcr.microsoft.com/playwright"],
+      "groupName": "playwright singlesource",
+      "groupSlug": "playwright"
+    },
+    {
+      "description": "playwright must not automerge - version skew breaks the WS handshake (checker.py:1523 vs playwright.yaml:20)",
+      "matchPackageNames": ["playwright", "mcr.microsoft.com/playwright"],
+      "automerge": false
+    },
+    {
+      "description": "Renovate updates itself in lockstep across the CronJob and the Compose file",
+      "matchPackageNames": ["renovate/renovate"],
+      "groupName": "renovate self-update",
+      "automerge": false
+    },
+    {
+      "description": "CI runs npm on the node the panel image is built from - the NODE_VERSION pin in tool-versions.env and node:22-alpine in the Dockerfile are the same dependency and move as one",
+      "matchPackageNames": ["node"],
+      "groupName": "node runtime",
+      "groupSlug": "node",
+      "automerge": false
+    },
+    {
+      "description": "Helm chart bumps change PVC fields and admission behaviour, keep them reviewable",
+      "matchDatasources": ["helm"],
+      "automerge": false
+    },
+    {
+      "description": "Require approval for major upgrades",
+      "matchUpdateTypes": ["major"],
+      "dependencyDashboardApproval": true,
+      "automerge": false
+    },
+    {
+      "description": "Group container patch updates",
+      "matchDatasources": ["docker"],
+      "matchUpdateTypes": ["patch"],
+      "groupName": "container patch updates"
+    }
+  ]
+}

searxng/compose.yaml

@@ -3,7 +3,7 @@
 services:
   core:
     container_name: searxng-core
-    image: docker.io/searxng/searxng:${SEARXNG_VERSION:-2026.09.13-d4ce87c23}
+    image: docker.io/searxng/searxng:${SEARXNG_VERSION:-2026.9.25-12f8b6515}
     restart: unless-stopped
     # ports:
     # - ${SEARXNG_PORT:-8080}

searxng/k8s/searxng.yaml

@@ -27,7 +27,7 @@ spec:
     spec:
       containers:
         - name: searxng
-          image: docker.io/searxng/searxng:2026.09.13-d4ce87c23
+          image: docker.io/searxng/searxng:2026.9.25-12f8b6515
           envFrom:
             - configMapRef:
                 name: searxng-config

userbot/k8s/base/panel.yaml

@@ -198,8 +198,7 @@ spec:
       serviceAccountName: userbot-panel
       containers:
         - name: userbot-panel
-          image: gcr.forust.xyz/forust/userbot-panel:latest
+          image: gcr.forust.xyz/forust/userbot-panel:prod
-          imagePullPolicy: Always
           ports:
             - name: http
               containerPort: 8080
@@ -209,7 +208,9 @@ spec:
             - name: USERBOT_LEGACY_NAMESPACES
               value: default
             - name: USERBOT_IMAGE
-              value: gcr.forust.xyz/forust/userbot:latest
+              # The build pushes main/prod only. The deploy resolves every gcr ref in
+              # this file, so a :latest here aborts the whole apply as unresolvable.
+              value: gcr.forust.xyz/forust/userbot:prod
             - name: USERBOT_STORAGE_CLASS
               value: local-path-retain
             - name: USERBOT_DOWNLOADS_HOST_PATH

userbot/k8s/base/userbots.yaml

@@ -24,8 +24,7 @@ spec:
     spec:
       containers:
         - name: forust-userbot
-          image: gcr.forust.xyz/forust/userbot:latest
+          image: gcr.forust.xyz/forust/userbot:prod
-          imagePullPolicy: Always
           resources:
             limits:
               memory: "1.5Gi"
@@ -96,8 +95,7 @@ spec:
     spec:
       containers:
         - name: anna-userbot
-          image: gcr.forust.xyz/forust/userbot:latest
+          image: gcr.forust.xyz/forust/userbot:prod
-          imagePullPolicy: Always
           resources:
             limits:
               memory: "1.5Gi"

userbot/panel/backend/app/auth_service.py

@@ -51,11 +51,11 @@ class TelegramAuthService:
             if len(self.flows) >= self.max_flows:
                 raise PanelError(
                     429,
-                    "Too many pending authorization flows; try again later",
+                    'Too many pending authorization flows; try again later',
                 )
         flow_id = secrets.token_urlsafe(24)
         telegram = Client(
-            f"auth-{flow_id}",
+            f'auth-{flow_id}',
             api_id=account.api_id,
             api_hash=account.api_hash,
             in_memory=True,
@@ -117,7 +117,7 @@ class TelegramAuthService:
         account: StringSessionStart,
     ) -> AuthorizedAccount:
         telegram = Client(
-            f"validate-{secrets.token_urlsafe(12)}",
+            f'validate-{secrets.token_urlsafe(12)}',
             api_id=account.api_id,
             api_hash=account.api_hash,
             session_string=account.session_string,
@@ -148,7 +148,7 @@ class TelegramAuthService:
         async with self._lock:
             flow = self.flows.get(flow_id)
         if flow is None:
-            raise PanelError(410, "Authorization flow expired; start again")
+            raise PanelError(410, 'Authorization flow expired; start again')
         return flow
 
     async def _finish(self, flow: AuthFlow) -> AuthorizedAccount:
@@ -171,11 +171,7 @@ class TelegramAuthService:
     async def _cleanup_expired(self) -> None:
         now = datetime.now(UTC)
         async with self._lock:
-            expired = [
+            expired = [self.flows.pop(flow_id) for flow_id, flow in list(self.flows.items()) if flow.expires_at <= now]
-                self.flows.pop(flow_id)
-                for flow_id, flow in list(self.flows.items())
-                if flow.expires_at <= now
-            ]
         if expired:
             await asyncio.gather(
                 *(self._disconnect(flow.client) for flow in expired),
@@ -191,19 +187,19 @@ class TelegramAuthService:
     @staticmethod
     def _translate(exc: Exception, *, session: bool = False) -> PanelError:
         if isinstance(exc, FloodWait):
-            return PanelError(429, f"Telegram rate limit; retry in {exc.value} seconds")
+            return PanelError(429, f'Telegram rate limit; retry in {exc.value} seconds')
         if isinstance(exc, ApiIdInvalid):
-            return PanelError(422, "Telegram API ID or API Hash is invalid")
+            return PanelError(422, 'Telegram API ID or API Hash is invalid')
         if isinstance(exc, PhoneNumberInvalid):
-            return PanelError(422, "Phone number is invalid")
+            return PanelError(422, 'Phone number is invalid')
         if isinstance(exc, PhoneCodeInvalid):
-            return PanelError(422, "Telegram code is invalid")
+            return PanelError(422, 'Telegram code is invalid')
         if isinstance(exc, PhoneCodeExpired):
-            return PanelError(410, "Telegram code expired; start again")
+            return PanelError(410, 'Telegram code expired; start again')
         if isinstance(exc, PasswordHashInvalid):
-            return PanelError(422, "2FA password is invalid")
+            return PanelError(422, '2FA password is invalid')
         if session and isinstance(exc, (Unauthorized, RPCError)):
-            return PanelError(422, "StringSession is invalid or expired")
+            return PanelError(422, 'StringSession is invalid or expired')
         if isinstance(exc, RPCError):
-            return PanelError(422, "Telegram rejected the authorization request")
+            return PanelError(422, 'Telegram rejected the authorization request')
-        return PanelError(503, "Telegram authorization is unavailable")
+        return PanelError(503, 'Telegram authorization is unavailable')

userbot/panel/backend/app/config.py

@@ -7,39 +7,37 @@ from pathlib import Path
 
 @dataclass(frozen=True)
 class Settings:
-    namespace: str = os.environ.get("USERBOT_NAMESPACE", "userbot")
+    namespace: str = os.environ.get('USERBOT_NAMESPACE', 'userbot')
     legacy_namespaces: tuple[str, ...] = tuple(
-        value.strip()
+        value.strip() for value in os.environ.get('USERBOT_LEGACY_NAMESPACES', 'default').split(',') if value.strip()
-        for value in os.environ.get("USERBOT_LEGACY_NAMESPACES", "default").split(",")
-        if value.strip()
     )
     image: str = os.environ.get(
-        "USERBOT_IMAGE",
+        'USERBOT_IMAGE',
-        "gcr.forust.xyz/forust/userbot:latest",
+        'gcr.forust.xyz/forust/userbot:latest',
     )
     common_secret: str = os.environ.get(
-        "USERBOT_COMMON_SECRET",
+        'USERBOT_COMMON_SECRET',
-        "userbot-common-secrets",
+        'userbot-common-secrets',
     )
     common_config: str = os.environ.get(
-        "USERBOT_COMMON_CONFIG",
+        'USERBOT_COMMON_CONFIG',
-        "userbot-common-config",
+        'userbot-common-config',
     )
     storage_class: str = os.environ.get(
-        "USERBOT_STORAGE_CLASS",
+        'USERBOT_STORAGE_CLASS',
-        "local-path-retain",
+        'local-path-retain',
     )
     downloads_host_path: str = os.environ.get(
-        "USERBOT_DOWNLOADS_HOST_PATH",
+        'USERBOT_DOWNLOADS_HOST_PATH',
-        "/srv/homelab/userbot/Downloads",
+        '/srv/homelab/userbot/Downloads',
     )
-    static_dir: Path = Path(os.environ.get("PANEL_STATIC_DIR", "/app/static"))
+    static_dir: Path = Path(os.environ.get('PANEL_STATIC_DIR', '/app/static'))
-    auth_ttl_seconds: int = int(os.environ.get("PANEL_AUTH_TTL_SECONDS", "600"))
+    auth_ttl_seconds: int = int(os.environ.get('PANEL_AUTH_TTL_SECONDS', '600'))
-    default_storage: str = os.environ.get("USERBOT_DEFAULT_STORAGE", "1Gi")
+    default_storage: str = os.environ.get('USERBOT_DEFAULT_STORAGE', '1Gi')
-    default_cpu_limit: str = os.environ.get("USERBOT_DEFAULT_CPU_LIMIT", "300m")
+    default_cpu_limit: str = os.environ.get('USERBOT_DEFAULT_CPU_LIMIT', '300m')
     default_memory_limit: str = os.environ.get(
-        "USERBOT_DEFAULT_MEMORY_LIMIT",
+        'USERBOT_DEFAULT_MEMORY_LIMIT',
-        "1536Mi",
+        '1536Mi',
     )
 
 

userbot/panel/backend/app/kubernetes_service.py

@@ -14,18 +14,18 @@ from .models import AccountBase, InstanceSummary
 
 logger = logging.getLogger(__name__)
 
-MANAGED_LABEL = "app.kubernetes.io/name=userbot"
+MANAGED_LABEL = 'app.kubernetes.io/name=userbot'
-INSTANCE_LABEL = "app.kubernetes.io/instance"
+INSTANCE_LABEL = 'app.kubernetes.io/instance'
-MANAGED_BY_LABEL = "app.kubernetes.io/managed-by"
+MANAGED_BY_LABEL = 'app.kubernetes.io/managed-by'
-DISPLAY_ANNOTATION = "userbot.forust.xyz/display-name"
+DISPLAY_ANNOTATION = 'userbot.forust.xyz/display-name'
-LEGACY_ANNOTATION = "userbot.forust.xyz/legacy"
+LEGACY_ANNOTATION = 'userbot.forust.xyz/legacy'
-CREDENTIALS_ANNOTATION = "userbot.forust.xyz/credentials-secret"
+CREDENTIALS_ANNOTATION = 'userbot.forust.xyz/credentials-secret'
-PVC_ANNOTATION = "userbot.forust.xyz/pvc"
+PVC_ANNOTATION = 'userbot.forust.xyz/pvc'
-RESTART_ANNOTATION = "userbot.forust.xyz/restarted-at"
+RESTART_ANNOTATION = 'userbot.forust.xyz/restarted-at'
 
 
 def _selector(labels: dict[str, str] | None) -> str:
-    return ",".join(f"{key}={value}" for key, value in (labels or {}).items())
+    return ','.join(f'{key}={value}' for key, value in (labels or {}).items())
 
 
 def _as_datetime(value: Any) -> datetime | None:
@@ -33,7 +33,7 @@ def _as_datetime(value: Any) -> datetime | None:
         return None
     if isinstance(value, datetime):
         return value
-    return getattr(value, "replace", lambda **_: None)(tzinfo=UTC)
+    return getattr(value, 'replace', lambda **_: None)(tzinfo=UTC)
 
 
 class KubernetesService:
@@ -55,7 +55,7 @@ class KubernetesService:
                 except Exception as exc:
                     raise PanelError(
                         503,
-                        "No in-cluster or kubeconfig configuration is available",
+                        'No in-cluster or kubeconfig configuration is available',
                     ) from exc
         self.core = core or client.CoreV1Api()
         self.apps = apps or client.AppsV1Api()
@@ -76,14 +76,14 @@ class KubernetesService:
             if exc.status == 404:
                 raise PanelError(
                     503,
-                    "Userbot common Secret or ConfigMap is missing in the userbot namespace",
+                    'Userbot common Secret or ConfigMap is missing in the userbot namespace',
                 ) from exc
-            raise self._api_error(exc, "Could not verify userbot prerequisites") from exc
+            raise self._api_error(exc, 'Could not verify userbot prerequisites') from exc
 
     def list_instances(
         self,
-        query: str = "",
+        query: str = '',
-        status: str = "",
+        status: str = '',
     ) -> list[InstanceSummary]:
         instances: list[InstanceSummary] = []
         for namespace in (self.settings.namespace, *self.settings.legacy_namespaces):
@@ -93,7 +93,7 @@ class KubernetesService:
                     label_selector=MANAGED_LABEL,
                 ).items
             except ApiException as exc:
-                raise self._api_error(exc, f"Could not list Deployments in {namespace}") from exc
+                raise self._api_error(exc, f'Could not list Deployments in {namespace}') from exc
             instances.extend(self._summarize(namespace, deployment) for deployment in deployments)
 
         query = query.strip().lower()
@@ -103,7 +103,7 @@ class KubernetesService:
                 for item in instances
                 if query in item.instance_id.lower()
                 or query in item.display_name.lower()
-                or query in (item.pod or "").lower()
+                or query in (item.pod or '').lower()
             ]
         if status:
             instances = [item for item in instances if item.status == status]
@@ -116,9 +116,9 @@ class KubernetesService:
     def assert_available(self, instance_id: str) -> None:
         names = self._resource_names(instance_id)
         checks = (
-            (self.apps.read_namespaced_deployment, names["deployment"], "Deployment"),
+            (self.apps.read_namespaced_deployment, names['deployment'], 'Deployment'),
-            (self.core.read_namespaced_secret, names["secret"], "Secret"),
+            (self.core.read_namespaced_secret, names['secret'], 'Secret'),
-            (self.core.read_namespaced_persistent_volume_claim, names["pvc"], "PVC"),
+            (self.core.read_namespaced_persistent_volume_claim, names['pvc'], 'PVC'),
         )
         for read, name, kind in checks:
             try:
@@ -126,8 +126,8 @@ class KubernetesService:
             except ApiException as exc:
                 if exc.status == 404:
                     continue
-                raise self._api_error(exc, f"Could not check {kind} {name}") from exc
+                raise self._api_error(exc, f'Could not check {kind} {name}') from exc
-            raise PanelError(409, f"{kind} {name} already exists")
+            raise PanelError(409, f'{kind} {name} already exists')
 
     def provision(self, account: AccountBase, session_string: str) -> InstanceSummary:
         with self._provision_lock:
@@ -139,25 +139,25 @@ class KubernetesService:
                     self.settings.namespace,
                     self._secret(account, session_string, names),
                 )
-                created.append(("secret", names["secret"]))
+                created.append(('secret', names['secret']))
                 self.core.create_namespaced_persistent_volume_claim(
                     self.settings.namespace,
                     self._pvc(account, names),
                 )
-                created.append(("pvc", names["pvc"]))
+                created.append(('pvc', names['pvc']))
                 self.apps.create_namespaced_deployment(
                     self.settings.namespace,
                     self._deployment(account, names),
                 )
-                created.append(("deployment", names["deployment"]))
+                created.append(('deployment', names['deployment']))
             except ApiException as exc:
                 self._rollback(created)
                 if exc.status == 409:
                     raise PanelError(
                         409,
-                        f"Instance {account.instance_id} already exists",
+                        f'Instance {account.instance_id} already exists',
                     ) from exc
-                raise self._api_error(exc, "Could not create userbot instance") from exc
+                raise self._api_error(exc, 'Could not create userbot instance') from exc
         return self.get_instance(account.instance_id)
 
     def scale(self, instance_id: str, replicas: int) -> InstanceSummary:
@@ -166,40 +166,40 @@ class KubernetesService:
             self.apps.patch_namespaced_deployment_scale(
                 deployment.metadata.name,
                 namespace,
-                {"spec": {"replicas": replicas}},
+                {'spec': {'replicas': replicas}},
             )
         except ApiException as exc:
-            raise self._api_error(exc, "Could not scale userbot instance") from exc
+            raise self._api_error(exc, 'Could not scale userbot instance') from exc
         return self.get_instance(instance_id)
 
     def restart(self, instance_id: str) -> InstanceSummary:
         namespace, deployment = self._find_deployment(instance_id)
         if (deployment.spec.replicas or 0) == 0:
-            raise PanelError(409, "Stopped instance cannot be restarted")
+            raise PanelError(409, 'Stopped instance cannot be restarted')
         timestamp = datetime.now(UTC).isoformat()
         try:
             self.apps.patch_namespaced_deployment(
                 deployment.metadata.name,
                 namespace,
                 {
-                    "spec": {
+                    'spec': {
-                        "template": {
+                        'template': {
-                            "metadata": {
+                            'metadata': {
-                                "annotations": {RESTART_ANNOTATION: timestamp},
+                                'annotations': {RESTART_ANNOTATION: timestamp},
                             }
                         }
                     }
                 },
             )
         except ApiException as exc:
-            raise self._api_error(exc, "Could not restart userbot instance") from exc
+            raise self._api_error(exc, 'Could not restart userbot instance') from exc
         return self.get_instance(instance_id)
 
     def logs(self, instance_id: str, tail: int = 250) -> str:
         namespace, deployment = self._find_deployment(instance_id)
         pods = self._pods_for_deployment(namespace, deployment)
         if not pods:
-            raise PanelError(409, "Userbot Pod is not running")
+            raise PanelError(409, 'Userbot Pod is not running')
         pod = pods[0]
         container = deployment.spec.template.spec.containers[0].name
         try:
@@ -211,22 +211,22 @@ class KubernetesService:
                 timestamps=True,
             )
         except ApiException as exc:
-            raise self._api_error(exc, "Could not read userbot logs") from exc
+            raise self._api_error(exc, 'Could not read userbot logs') from exc
 
     def delete(self, instance_id: str, *, delete_data: bool) -> None:
         namespace, deployment = self._find_deployment(instance_id)
         annotations = deployment.metadata.annotations or {}
-        if annotations.get(LEGACY_ANNOTATION) == "true" or namespace != self.settings.namespace:
+        if annotations.get(LEGACY_ANNOTATION) == 'true' or namespace != self.settings.namespace:
-            raise PanelError(409, "Legacy instances cannot be deleted from the panel")
+            raise PanelError(409, 'Legacy instances cannot be deleted from the panel')
 
         names = self._resource_names(instance_id)
-        secret_name = annotations.get(CREDENTIALS_ANNOTATION, names["secret"])
+        secret_name = annotations.get(CREDENTIALS_ANNOTATION, names['secret'])
-        pvc_name = annotations.get(PVC_ANNOTATION, names["pvc"])
+        pvc_name = annotations.get(PVC_ANNOTATION, names['pvc'])
         operations = [
             (
                 self.apps.delete_namespaced_deployment,
                 (deployment.metadata.name, namespace),
-                {"propagation_policy": "Foreground"},
+                {'propagation_policy': 'Foreground'},
             ),
             (self.core.delete_namespaced_secret, (secret_name, namespace), {}),
         ]
@@ -243,10 +243,10 @@ class KubernetesService:
                 delete_resource(*args, **kwargs)
             except ApiException as exc:
                 if exc.status != 404:
-                    raise self._api_error(exc, "Could not delete userbot instance") from exc
+                    raise self._api_error(exc, 'Could not delete userbot instance') from exc
 
     def _find_deployment(self, instance_id: str) -> tuple[str, Any]:
-        selector = f"{MANAGED_LABEL},{INSTANCE_LABEL}={instance_id}"
+        selector = f'{MANAGED_LABEL},{INSTANCE_LABEL}={instance_id}'
         for namespace in (self.settings.namespace, *self.settings.legacy_namespaces):
             try:
                 items = self.apps.list_namespaced_deployment(
@@ -254,16 +254,16 @@ class KubernetesService:
                     label_selector=selector,
                 ).items
             except ApiException as exc:
-                raise self._api_error(exc, "Could not find userbot instance") from exc
+                raise self._api_error(exc, 'Could not find userbot instance') from exc
             if items:
                 return namespace, items[0]
-        raise PanelError(404, f"Instance {instance_id} does not exist")
+        raise PanelError(404, f'Instance {instance_id} does not exist')
 
     def _summarize(self, namespace: str, deployment: Any) -> InstanceSummary:
         labels = deployment.metadata.labels or {}
         annotations = deployment.metadata.annotations or {}
         instance_id = labels.get(INSTANCE_LABEL, deployment.metadata.name)
-        legacy = annotations.get(LEGACY_ANNOTATION) == "true"
+        legacy = annotations.get(LEGACY_ANNOTATION) == 'true'
         pods = self._pods_for_deployment(namespace, deployment)
         pod = pods[0] if pods else None
         desired = deployment.spec.replicas or 0
@@ -287,21 +287,21 @@ class KubernetesService:
             updated_at = pod.status.start_time or pod.metadata.creation_timestamp
 
         if desired == 0:
-            status = "stopped"
+            status = 'stopped'
         elif reason in {
-            "CrashLoopBackOff",
+            'CrashLoopBackOff',
-            "Error",
+            'Error',
-            "ImagePullBackOff",
+            'ImagePullBackOff',
-            "ErrImagePull",
+            'ErrImagePull',
-            "CreateContainerConfigError",
+            'CreateContainerConfigError',
-            "RunContainerError",
+            'RunContainerError',
-        } or (pod is not None and pod.status.phase == "Failed"):
+        } or (pod is not None and pod.status.phase == 'Failed'):
-            status = "error"
+            status = 'error'
         elif ready and (deployment.status.available_replicas or 0) > 0:
-            status = "running"
+            status = 'running'
         else:
-            status = "pending"
+            status = 'pending'
-            reason = reason or (pod.status.phase if pod is not None else "Scheduling")
+            reason = reason or (pod.status.phase if pod is not None else 'Scheduling')
 
         container_spec = deployment.spec.template.spec.containers[0]
         limits = (container_spec.resources.limits or {}) if container_spec.resources else {}
@@ -321,8 +321,8 @@ class KubernetesService:
             pvc=pvc_name,
             storage=storage,
             image=container_spec.image,
-            cpu_limit=limits.get("cpu"),
+            cpu_limit=limits.get('cpu'),
-            memory_limit=limits.get("memory"),
+            memory_limit=limits.get('memory'),
             cpu_usage=cpu_usage,
             memory_usage=memory_usage,
             updated_at=_as_datetime(updated_at),
@@ -338,7 +338,7 @@ class KubernetesService:
                 label_selector=selector,
             ).items
         except ApiException as exc:
-            raise self._api_error(exc, "Could not list userbot Pods") from exc
+            raise self._api_error(exc, 'Could not list userbot Pods') from exc
         return sorted(
             pods,
             key=lambda pod: pod.metadata.creation_timestamp or datetime.min.replace(tzinfo=UTC),
@@ -350,17 +350,17 @@ class KubernetesService:
             return None, None
         try:
             metrics = self.custom.get_namespaced_custom_object(
-                "metrics.k8s.io",
+                'metrics.k8s.io',
-                "v1beta1",
+                'v1beta1',
                 namespace,
-                "pods",
+                'pods',
                 pod_name,
             )
         except (ApiException, AttributeError):
             return None, None
-        containers = metrics.get("containers", [])
+        containers = metrics.get('containers', [])
-        cpu = containers[0].get("usage", {}).get("cpu") if containers else None
+        cpu = containers[0].get('usage', {}).get('cpu') if containers else None
-        memory = containers[0].get("usage", {}).get("memory") if containers else None
+        memory = containers[0].get('usage', {}).get('memory') if containers else None
         return cpu, memory
 
     def _pvc_storage(self, namespace: str, pvc_name: str | None) -> str | None:
@@ -371,7 +371,7 @@ class KubernetesService:
         except ApiException:
             return None
         requests = pvc.spec.resources.requests or {}
-        return requests.get("storage")
+        return requests.get('storage')
 
     @staticmethod
     def _deployment_pvc(deployment: Any) -> str | None:
@@ -383,9 +383,9 @@ class KubernetesService:
     @staticmethod
     def _resource_names(instance_id: str) -> dict[str, str]:
         return {
-            "deployment": f"userbot-{instance_id}",
+            'deployment': f'userbot-{instance_id}',
-            "secret": f"userbot-{instance_id}-credentials",
+            'secret': f'userbot-{instance_id}-credentials',
-            "pvc": f"userbot-{instance_id}-data",
+            'pvc': f'userbot-{instance_id}-data',
         }
 
     def _metadata(
@@ -398,14 +398,14 @@ class KubernetesService:
             name=resource_name,
             namespace=self.settings.namespace,
             labels={
-                "app.kubernetes.io/name": "userbot",
+                'app.kubernetes.io/name': 'userbot',
                 INSTANCE_LABEL: account.instance_id,
-                MANAGED_BY_LABEL: "userbot-panel",
+                MANAGED_BY_LABEL: 'userbot-panel',
             },
             annotations={
                 DISPLAY_ANNOTATION: account.display_name,
-                CREDENTIALS_ANNOTATION: names["secret"],
+                CREDENTIALS_ANNOTATION: names['secret'],
-                PVC_ANNOTATION: names["pvc"],
+                PVC_ANNOTATION: names['pvc'],
             },
         )
 
@@ -416,12 +416,12 @@ class KubernetesService:
         names: dict[str, str],
     ) -> client.V1Secret:
         return client.V1Secret(
-            metadata=self._metadata(account, names, names["secret"]),
+            metadata=self._metadata(account, names, names['secret']),
-            type="Opaque",
+            type='Opaque',
             string_data={
-                "API_ID": str(account.api_id),
+                'API_ID': str(account.api_id),
-                "API_HASH": account.api_hash,
+                'API_HASH': account.api_hash,
-                "STRINGSESSION": session_string,
+                'STRINGSESSION': session_string,
             },
         )
 
@@ -431,12 +431,12 @@ class KubernetesService:
         names: dict[str, str],
     ) -> client.V1PersistentVolumeClaim:
         return client.V1PersistentVolumeClaim(
-            metadata=self._metadata(account, names, names["pvc"]),
+            metadata=self._metadata(account, names, names['pvc']),
             spec=client.V1PersistentVolumeClaimSpec(
-                access_modes=["ReadWriteOnce"],
+                access_modes=['ReadWriteOnce'],
                 storage_class_name=self.settings.storage_class,
                 resources=client.V1VolumeResourceRequirements(
-                    requests={"storage": account.resources.storage},
+                    requests={'storage': account.resources.storage},
                 ),
             ),
         )
@@ -447,63 +447,55 @@ class KubernetesService:
         names: dict[str, str],
     ) -> client.V1Deployment:
         pod_labels = {
-            "app.kubernetes.io/name": "userbot",
+            'app.kubernetes.io/name': 'userbot',
             INSTANCE_LABEL: account.instance_id,
-            MANAGED_BY_LABEL: "userbot-panel",
+            MANAGED_BY_LABEL: 'userbot-panel',
         }
         container = client.V1Container(
-            name="userbot",
+            name='userbot',
             image=self.settings.image,
-            image_pull_policy="Always",
+            image_pull_policy='Always',
             env_from=[
-                client.V1EnvFromSource(
+                client.V1EnvFromSource(secret_ref=client.V1SecretEnvSource(name=self.settings.common_secret)),
-                    secret_ref=client.V1SecretEnvSource(name=self.settings.common_secret)
+                client.V1EnvFromSource(config_map_ref=client.V1ConfigMapEnvSource(name=self.settings.common_config)),
-                ),
+                client.V1EnvFromSource(secret_ref=client.V1SecretEnvSource(name=names['secret'])),
-                client.V1EnvFromSource(
-                    config_map_ref=client.V1ConfigMapEnvSource(name=self.settings.common_config)
-                ),
-                client.V1EnvFromSource(
-                    secret_ref=client.V1SecretEnvSource(name=names["secret"])
-                ),
             ],
             resources=client.V1ResourceRequirements(
-                requests={"cpu": "80m", "memory": "512Mi"},
+                requests={'cpu': '80m', 'memory': '512Mi'},
                 limits={
-                    "cpu": account.resources.cpu_limit,
+                    'cpu': account.resources.cpu_limit,
-                    "memory": account.resources.memory_limit,
+                    'memory': account.resources.memory_limit,
                 },
             ),
             volume_mounts=[
-                client.V1VolumeMount(name="data", mount_path="/app/data"),
+                client.V1VolumeMount(name='data', mount_path='/app/data'),
-                client.V1VolumeMount(name="downloads", mount_path="/app/downloads"),
+                client.V1VolumeMount(name='downloads', mount_path='/app/downloads'),
             ],
         )
         pod_spec = client.V1PodSpec(
-            service_account_name="userbot-runtime",
+            service_account_name='userbot-runtime',
             automount_service_account_token=False,
             containers=[container],
             termination_grace_period_seconds=30,
             volumes=[
                 client.V1Volume(
-                    name="data",
+                    name='data',
-                    persistent_volume_claim=client.V1PersistentVolumeClaimVolumeSource(
+                    persistent_volume_claim=client.V1PersistentVolumeClaimVolumeSource(claim_name=names['pvc']),
-                        claim_name=names["pvc"]
-                    ),
                 ),
                 client.V1Volume(
-                    name="downloads",
+                    name='downloads',
                     host_path=client.V1HostPathVolumeSource(
                         path=self.settings.downloads_host_path,
-                        type="DirectoryOrCreate",
+                        type='DirectoryOrCreate',
                     ),
                 ),
             ],
         )
         return client.V1Deployment(
-            metadata=self._metadata(account, names, names["deployment"]),
+            metadata=self._metadata(account, names, names['deployment']),
             spec=client.V1DeploymentSpec(
                 replicas=1,
-                strategy=client.V1DeploymentStrategy(type="Recreate"),
+                strategy=client.V1DeploymentStrategy(type='Recreate'),
                 selector=client.V1LabelSelector(match_labels=pod_labels),
                 template=client.V1PodTemplateSpec(
                     metadata=client.V1ObjectMeta(labels=pod_labels),
@@ -515,9 +507,9 @@ class KubernetesService:
     def _rollback(self, created: list[tuple[str, str]]) -> None:
         for kind, name in reversed(created):
             try:
-                if kind == "deployment":
+                if kind == 'deployment':
                     self.apps.delete_namespaced_deployment(name, self.settings.namespace)
-                elif kind == "pvc":
+                elif kind == 'pvc':
                     self.core.delete_namespaced_persistent_volume_claim(
                         name,
                         self.settings.namespace,
@@ -526,7 +518,7 @@ class KubernetesService:
                     self.core.delete_namespaced_secret(name, self.settings.namespace)
             except ApiException as exc:
                 logger.warning(
-                    "Rollback of %s %s in %s failed: %s",
+                    'Rollback of %s %s in %s failed: %s',
                     kind,
                     name,
                     self.settings.namespace,
@@ -536,9 +528,9 @@ class KubernetesService:
     @staticmethod
     def _api_error(exc: ApiException, detail: str) -> PanelError:
         if exc.status == 403:
-            return PanelError(503, f"{detail}: Kubernetes RBAC denied the operation")
+            return PanelError(503, f'{detail}: Kubernetes RBAC denied the operation')
         if exc.status == 409:
-            return PanelError(409, f"{detail}: resource conflict")
+            return PanelError(409, f'{detail}: resource conflict')
         if exc.status == 404:
-            return PanelError(404, f"{detail}: resource not found")
+            return PanelError(404, f'{detail}: resource not found')
         return PanelError(503, detail)

userbot/panel/backend/app/main.py

@@ -30,21 +30,21 @@ async def lifespan(app: FastAPI):
     try:
         app.state.kubernetes.ensure_prerequisites()
     except PanelError as exc:
-        print(f"WARNING: userbot prerequisites check failed at startup: {exc.detail}")
+        print(f'WARNING: userbot prerequisites check failed at startup: {exc.detail}')
     yield
     await app.state.telegram.close()
 
 
 app = FastAPI(
-    title="Userbot Kubernetes Control",
+    title='Userbot Kubernetes Control',
-    version="1.0.0",
+    version='1.0.0',
     lifespan=lifespan,
 )
 
 
 @app.exception_handler(PanelError)
 async def panel_error_handler(_request: Request, exc: PanelError) -> JSONResponse:
-    return JSONResponse(status_code=exc.status_code, content={"detail": exc.detail})
+    return JSONResponse(status_code=exc.status_code, content={'detail': exc.detail})
 
 
 @app.exception_handler(RequestValidationError)
@@ -54,13 +54,13 @@ async def validation_error_handler(
 ) -> JSONResponse:
     errors = [
         {
-            "loc": error.get("loc", ()),
+            'loc': error.get('loc', ()),
-            "msg": error.get("msg", "Invalid value"),
+            'msg': error.get('msg', 'Invalid value'),
-            "type": error.get("type", "value_error"),
+            'type': error.get('type', 'value_error'),
         }
         for error in exc.errors()
     ]
-    return JSONResponse(status_code=422, content={"detail": errors})
+    return JSONResponse(status_code=422, content={'detail': errors})
 
 
 def kube(request: Request) -> KubernetesService:
@@ -71,7 +71,7 @@ def telegram(request: Request) -> TelegramAuthService:
     return request.app.state.telegram
 
 
-@app.get("/api/health")
+@app.get('/api/health')
 def health(request: Request) -> dict[str, object]:
     service = kube(request)
     try:
@@ -80,61 +80,61 @@ def health(request: Request) -> dict[str, object]:
             limit=1,
         )
     except Exception:
-        return {"ok": False, "kubernetes": False}
+        return {'ok': False, 'kubernetes': False}
-    return {"ok": True, "kubernetes": True}
+    return {'ok': True, 'kubernetes': True}
 
 
-@app.get("/api/instances", response_model=list[InstanceSummary])
+@app.get('/api/instances', response_model=list[InstanceSummary])
 def list_instances(
     request: Request,
-    query: str = "",
+    query: str = '',
-    status: str = "",
+    status: str = '',
 ) -> list[InstanceSummary]:
     return kube(request).list_instances(query=query, status=status)
 
 
-@app.get("/api/instances/{instance_id}", response_model=InstanceSummary)
+@app.get('/api/instances/{instance_id}', response_model=InstanceSummary)
 def get_instance(instance_id: str, request: Request) -> InstanceSummary:
     return kube(request).get_instance(instance_id)
 
 
-@app.get("/api/instances/{instance_id}/logs")
+@app.get('/api/instances/{instance_id}/logs')
 def get_logs(
     instance_id: str,
     request: Request,
     tail: Annotated[int, Query(ge=1, le=1000)] = 250,
 ) -> dict[str, str]:
-    return {"logs": kube(request).logs(instance_id, tail)}
+    return {'logs': kube(request).logs(instance_id, tail)}
 
 
-@app.post("/api/instances/{instance_id}/start", response_model=InstanceSummary)
+@app.post('/api/instances/{instance_id}/start', response_model=InstanceSummary)
 def start_instance(instance_id: str, request: Request) -> InstanceSummary:
     return kube(request).scale(instance_id, 1)
 
 
-@app.post("/api/instances/{instance_id}/stop", response_model=InstanceSummary)
+@app.post('/api/instances/{instance_id}/stop', response_model=InstanceSummary)
 def stop_instance(instance_id: str, request: Request) -> InstanceSummary:
     return kube(request).scale(instance_id, 0)
 
 
-@app.post("/api/instances/{instance_id}/restart", response_model=InstanceSummary)
+@app.post('/api/instances/{instance_id}/restart', response_model=InstanceSummary)
 def restart_instance(instance_id: str, request: Request) -> InstanceSummary:
     return kube(request).restart(instance_id)
 
 
-@app.post("/api/instances/{instance_id}/delete", status_code=204)
+@app.post('/api/instances/{instance_id}/delete', status_code=204)
 def delete_instance(
     instance_id: str,
     payload: DeleteRequest,
     request: Request,
 ) -> Response:
     if payload.confirmation != instance_id:
-        raise PanelError(422, "Type the instance id exactly to confirm deletion")
+        raise PanelError(422, 'Type the instance id exactly to confirm deletion')
     kube(request).delete(instance_id, delete_data=payload.delete_data)
     return Response(status_code=204)
 
 
-@app.post("/api/auth/phone/start", response_model=AuthResult)
+@app.post('/api/auth/phone/start', response_model=AuthResult)
 async def auth_phone_start(
     payload: PhoneStart,
     request: Request,
@@ -142,10 +142,10 @@ async def auth_phone_start(
     service = kube(request)
     service.assert_available(payload.instance_id)
     flow_id = await telegram(request).start_phone(payload)
-    return AuthResult(status="code_required", flow_id=flow_id)
+    return AuthResult(status='code_required', flow_id=flow_id)
 
 
-@app.post("/api/auth/phone/{flow_id}/code", response_model=AuthResult)
+@app.post('/api/auth/phone/{flow_id}/code', response_model=AuthResult)
 async def auth_phone_code(
     flow_id: str,
     payload: CodeSubmit,
@@ -153,12 +153,12 @@ async def auth_phone_code(
 ) -> AuthResult:
     authorized = await telegram(request).submit_code(flow_id, payload.code)
     if authorized is None:
-        return AuthResult(status="password_required", flow_id=flow_id)
+        return AuthResult(status='password_required', flow_id=flow_id)
     instance = kube(request).provision(authorized.account, authorized.session_string)
-    return AuthResult(status="ready", instance=instance)
+    return AuthResult(status='ready', instance=instance)
 
 
-@app.post("/api/auth/phone/{flow_id}/password", response_model=AuthResult)
+@app.post('/api/auth/phone/{flow_id}/password', response_model=AuthResult)
 async def auth_phone_password(
     flow_id: str,
     payload: PasswordSubmit,
@@ -166,10 +166,10 @@ async def auth_phone_password(
 ) -> AuthResult:
     authorized = await telegram(request).submit_password(flow_id, payload.password)
     instance = kube(request).provision(authorized.account, authorized.session_string)
-    return AuthResult(status="ready", instance=instance)
+    return AuthResult(status='ready', instance=instance)
 
 
-@app.post("/api/auth/string-session", response_model=AuthResult)
+@app.post('/api/auth/string-session', response_model=AuthResult)
 async def auth_string_session(
     payload: StringSessionStart,
     request: Request,
@@ -178,28 +178,28 @@ async def auth_string_session(
     service.assert_available(payload.instance_id)
     authorized = await telegram(request).validate_string_session(payload)
     instance = service.provision(authorized.account, authorized.session_string)
-    return AuthResult(status="ready", instance=instance)
+    return AuthResult(status='ready', instance=instance)
 
 
 static_dir = settings.static_dir
-assets_dir = static_dir / "assets"
+assets_dir = static_dir / 'assets'
 if assets_dir.exists():
-    app.mount("/assets", StaticFiles(directory=assets_dir), name="assets")
+    app.mount('/assets', StaticFiles(directory=assets_dir), name='assets')
 
 
-@app.get("/", include_in_schema=False)
+@app.get('/', include_in_schema=False)
 def index() -> FileResponse:
-    return FileResponse(static_dir / "index.html")
+    return FileResponse(static_dir / 'index.html')
 
 
-@app.get("/{path:path}", include_in_schema=False)
+@app.get('/{path:path}', include_in_schema=False)
 def spa_fallback(path: str) -> FileResponse:
     root = static_dir.resolve()
     candidate = (static_dir / path).resolve()
     try:
         candidate.relative_to(root)
     except ValueError:
-        return FileResponse(static_dir / "index.html")
+        return FileResponse(static_dir / 'index.html')
     if candidate.is_file():
         return FileResponse(candidate)
-    return FileResponse(static_dir / "index.html")
+    return FileResponse(static_dir / 'index.html')

userbot/panel/backend/app/models.py

@@ -5,13 +5,13 @@ from typing import Literal
 
 from pydantic import BaseModel, Field, field_validator
 
-INSTANCE_PATTERN = r"^[a-z0-9](?:[a-z0-9-]{0,38}[a-z0-9])?$"
+INSTANCE_PATTERN = r'^[a-z0-9](?:[a-z0-9-]{0,38}[a-z0-9])?$'
 
 
 class Resources(BaseModel):
-    storage: str = "1Gi"
+    storage: str = '1Gi'
-    cpu_limit: str = "300m"
+    cpu_limit: str = '300m'
-    memory_limit: str = "1536Mi"
+    memory_limit: str = '1536Mi'
 
 
 class AccountBase(BaseModel):
@@ -21,7 +21,7 @@ class AccountBase(BaseModel):
     api_hash: str = Field(min_length=16, max_length=128)
     resources: Resources = Field(default_factory=Resources)
 
-    @field_validator("display_name", "api_hash")
+    @field_validator('display_name', 'api_hash')
     @classmethod
     def strip_text(cls, value: str) -> str:
         return value.strip()
@@ -30,12 +30,12 @@ class AccountBase(BaseModel):
 class PhoneStart(AccountBase):
     phone: str = Field(min_length=7, max_length=32)
 
-    @field_validator("phone")
+    @field_validator('phone')
     @classmethod
     def normalize_phone(cls, value: str) -> str:
         value = value.strip()
-        if not value.startswith("+"):
+        if not value.startswith('+'):
-            raise ValueError("phone must use international format")
+            raise ValueError('phone must use international format')
         return value
 
 
@@ -46,10 +46,10 @@ class StringSessionStart(AccountBase):
 class CodeSubmit(BaseModel):
     code: str = Field(min_length=3, max_length=12)
 
-    @field_validator("code")
+    @field_validator('code')
     @classmethod
     def normalize_code(cls, value: str) -> str:
-        return "".join(value.split())
+        return ''.join(value.split())
 
 
 class PasswordSubmit(BaseModel):
@@ -67,7 +67,7 @@ class InstanceSummary(BaseModel):
     namespace: str
     deployment: str
     pod: str | None = None
-    status: Literal["running", "stopped", "pending", "error"]
+    status: Literal['running', 'stopped', 'pending', 'error']
     reason: str | None = None
     ready: bool = False
     restarts: int = 0
@@ -84,6 +84,6 @@ class InstanceSummary(BaseModel):
 
 
 class AuthResult(BaseModel):
-    status: Literal["code_required", "password_required", "ready"]
+    status: Literal['code_required', 'password_required', 'ready']
     flow_id: str | None = None
     instance: InstanceSummary | None = None

userbot/panel/backend/tests/test_auth_service.py

@@ -23,7 +23,7 @@ class FakeClient:
         self.disconnected = True
 
     async def send_code(self, _phone):
-        return SimpleNamespace(phone_code_hash="hash")
+        return SimpleNamespace(phone_code_hash='hash')
 
     async def sign_in(self, *_args):
         if self.requires_password:
@@ -38,49 +38,49 @@ class FakeClient:
         return SimpleNamespace(id=1)
 
     async def export_session_string(self):
-        return "exported-session"
+        return 'exported-session'
 
 
 def phone_payload() -> PhoneStart:
     return PhoneStart(
-        instance_id="test",
+        instance_id='test',
-        display_name="Test",
+        display_name='Test',
         api_id=123,
-        api_hash="0123456789abcdef",
+        api_hash='0123456789abcdef',
-        phone="+421900000000",
+        phone='+421900000000',
     )
 
 
 @pytest.mark.asyncio
 async def test_phone_code_success_closes_and_forgets_client(monkeypatch) -> None:
-    monkeypatch.setattr("app.auth_service.Client", FakeClient)
+    monkeypatch.setattr('app.auth_service.Client', FakeClient)
     auth = TelegramAuthService()
 
     flow_id = await auth.start_phone(phone_payload())
-    result = await auth.submit_code(flow_id, "12345")
+    result = await auth.submit_code(flow_id, '12345')
 
-    assert result.session_string == "exported-session"
+    assert result.session_string == 'exported-session'
     assert flow_id not in auth.flows
     assert FakeClient.instances[-1].disconnected is True
-    assert FakeClient.instances[-1].kwargs["in_memory"] is True
+    assert FakeClient.instances[-1].kwargs['in_memory'] is True
-    assert FakeClient.instances[-1].kwargs["no_updates"] is True
+    assert FakeClient.instances[-1].kwargs['no_updates'] is True
 
 
 @pytest.mark.asyncio
 async def test_string_session_is_validated_and_closed(monkeypatch) -> None:
-    monkeypatch.setattr("app.auth_service.Client", FakeClient)
+    monkeypatch.setattr('app.auth_service.Client', FakeClient)
     auth = TelegramAuthService()
     payload = StringSessionStart(
-        instance_id="test",
+        instance_id='test',
-        display_name="Test",
+        display_name='Test',
         api_id=123,
-        api_hash="0123456789abcdef",
+        api_hash='0123456789abcdef',
-        session_string="x" * 64,
+        session_string='x' * 64,
     )
 
     result = await auth.validate_string_session(payload)
 
-    assert result.session_string == "exported-session"
+    assert result.session_string == 'exported-session'
     assert FakeClient.instances[-1].disconnected is True
 
 
@@ -88,7 +88,7 @@ async def test_string_session_is_validated_and_closed(monkeypatch) -> None:
 async def test_start_phone_rejects_overflow(monkeypatch) -> None:
     from app.errors import PanelError
 
-    monkeypatch.setattr("app.auth_service.Client", FakeClient)
+    monkeypatch.setattr('app.auth_service.Client', FakeClient)
     auth = TelegramAuthService(ttl_seconds=3600, max_flows=2)
 
     await auth.start_phone(phone_payload())
@@ -98,4 +98,4 @@ async def test_start_phone_rejects_overflow(monkeypatch) -> None:
         await auth.start_phone(phone_payload())
 
     assert error.value.status_code == 429
-    assert "Too many pending" in error.value.detail
+    assert 'Too many pending' in error.value.detail

userbot/panel/backend/tests/test_kubernetes_service.py

@@ -20,35 +20,35 @@ def service() -> KubernetesService:
 
 def account() -> AccountBase:
     return AccountBase(
-        instance_id="test-account",
+        instance_id='test-account',
-        display_name="Test Account",
+        display_name='Test Account',
         api_id=12345,
-        api_hash="0123456789abcdef0123456789abcdef",
+        api_hash='0123456789abcdef0123456789abcdef',
     )
 
 
 def test_renders_managed_resources_without_leaking_credentials() -> None:
     kube = service()
-    names = kube._resource_names("test-account")
+    names = kube._resource_names('test-account')
-    secret = kube._secret(account(), "SESSION", names)
+    secret = kube._secret(account(), 'SESSION', names)
     pvc = kube._pvc(account(), names)
     deployment = kube._deployment(account(), names)
 
     assert secret.string_data == {
-        "API_ID": "12345",
+        'API_ID': '12345',
-        "API_HASH": "0123456789abcdef0123456789abcdef",
+        'API_HASH': '0123456789abcdef0123456789abcdef',
-        "STRINGSESSION": "SESSION",
+        'STRINGSESSION': 'SESSION',
     }
-    assert pvc.spec.storage_class_name == "local-path-retain"
+    assert pvc.spec.storage_class_name == 'local-path-retain'
-    assert pvc.spec.resources.requests["storage"] == "1Gi"
+    assert pvc.spec.resources.requests['storage'] == '1Gi'
-    assert deployment.spec.strategy.type == "Recreate"
+    assert deployment.spec.strategy.type == 'Recreate'
     assert deployment.spec.replicas == 1
     assert deployment.spec.template.spec.automount_service_account_token is False
-    assert deployment.spec.template.spec.service_account_name == "userbot-runtime"
+    assert deployment.spec.template.spec.service_account_name == 'userbot-runtime'
-    assert deployment.spec.template.spec.volumes[1].host_path.path.endswith("/Downloads")
+    assert deployment.spec.template.spec.volumes[1].host_path.path.endswith('/Downloads')
     assert deployment.spec.template.spec.containers[0].resources.requests == {
-        "cpu": "80m",
+        'cpu': '80m',
-        "memory": "512Mi",
+        'memory': '512Mi',
     }
 
 
@@ -57,10 +57,10 @@ def test_collision_is_reported_before_auth() -> None:
     kube.apps.read_namespaced_deployment.return_value = object()
 
     with pytest.raises(PanelError) as error:
-        kube.assert_available("test-account")
+        kube.assert_available('test-account')
 
     assert error.value.status_code == 409
-    assert "Deployment" in error.value.detail
+    assert 'Deployment' in error.value.detail
 
 
 def test_partial_provision_rolls_back_only_created_resources() -> None:
@@ -70,11 +70,11 @@ def test_partial_provision_rolls_back_only_created_resources() -> None:
     kube.core.create_namespaced_persistent_volume_claim.side_effect = ApiException(status=500)
 
     with pytest.raises(PanelError):
-        kube.provision(account(), "SESSION")
+        kube.provision(account(), 'SESSION')
 
     kube.core.delete_namespaced_secret.assert_called_once_with(
-        "userbot-test-account-credentials",
+        'userbot-test-account-credentials',
-        "userbot",
+        'userbot',
     )
     kube.core.delete_namespaced_persistent_volume_claim.assert_not_called()
     kube.apps.delete_namespaced_deployment.assert_not_called()
@@ -86,18 +86,18 @@ def test_provision_conflict_reports_existing_instance() -> None:
     kube.apps.create_namespaced_deployment.side_effect = ApiException(status=409)
 
     with pytest.raises(PanelError) as error:
-        kube.provision(account(), "SESSION")
+        kube.provision(account(), 'SESSION')
 
     assert error.value.status_code == 409
-    assert "already exists" in error.value.detail
+    assert 'already exists' in error.value.detail
     # Partial resources created before the 409 must be rolled back.
     kube.core.delete_namespaced_secret.assert_called_once_with(
-        "userbot-test-account-credentials",
+        'userbot-test-account-credentials',
-        "userbot",
+        'userbot',
     )
     kube.core.delete_namespaced_persistent_volume_claim.assert_called_once_with(
-        "userbot-test-account-data",
+        'userbot-test-account-data',
-        "userbot",
+        'userbot',
     )
 
 
@@ -105,25 +105,25 @@ def test_delete_retains_pvc_unless_explicitly_requested() -> None:
     kube = service()
     deployment = SimpleNamespace(
         metadata=SimpleNamespace(
-            name="userbot-test-account",
+            name='userbot-test-account',
             annotations={
-                "userbot.forust.xyz/credentials-secret": "credentials",
+                'userbot.forust.xyz/credentials-secret': 'credentials',
-                "userbot.forust.xyz/pvc": "data",
+                'userbot.forust.xyz/pvc': 'data',
             },
         )
     )
-    kube._find_deployment = Mock(return_value=("userbot", deployment))
+    kube._find_deployment = Mock(return_value=('userbot', deployment))
 
-    kube.delete("test-account", delete_data=False)
+    kube.delete('test-account', delete_data=False)
 
     kube.apps.delete_namespaced_deployment.assert_called_once()
-    kube.core.delete_namespaced_secret.assert_called_once_with("credentials", "userbot")
+    kube.core.delete_namespaced_secret.assert_called_once_with('credentials', 'userbot')
     kube.core.delete_namespaced_persistent_volume_claim.assert_not_called()
 
-    kube.delete("test-account", delete_data=True)
+    kube.delete('test-account', delete_data=True)
     kube.core.delete_namespaced_persistent_volume_claim.assert_called_once_with(
-        "data",
+        'data',
-        "userbot",
+        'userbot',
     )
 
 
@@ -131,19 +131,19 @@ def test_legacy_delete_is_blocked() -> None:
     kube = service()
     deployment = SimpleNamespace(
         metadata=SimpleNamespace(
-            name="forust-userbot-deployment",
+            name='forust-userbot-deployment',
-            annotations={"userbot.forust.xyz/legacy": "true"},
+            annotations={'userbot.forust.xyz/legacy': 'true'},
         )
     )
-    kube._find_deployment = Mock(return_value=("default", deployment))
+    kube._find_deployment = Mock(return_value=('default', deployment))
 
     with pytest.raises(PanelError) as error:
-        kube.delete("forust", delete_data=False)
+        kube.delete('forust', delete_data=False)
 
     assert error.value.status_code == 409
 
 
-def pod(*, ready: bool, phase: str = "Running", reason: str | None = None):
+def pod(*, ready: bool, phase: str = 'Running', reason: str | None = None):
     waiting = SimpleNamespace(reason=reason) if reason else None
     state = SimpleNamespace(waiting=waiting, terminated=None)
     status = SimpleNamespace(
@@ -154,25 +154,25 @@ def pod(*, ready: bool, phase: str = "Running", reason: str | None = None):
         start_time=datetime.now(UTC),
     )
     return SimpleNamespace(
-        metadata=SimpleNamespace(name="pod-1", creation_timestamp=datetime.now(UTC)),
+        metadata=SimpleNamespace(name='pod-1', creation_timestamp=datetime.now(UTC)),
         status=status,
     )
 
 
 def deployment(replicas: int = 1):
-    resources = SimpleNamespace(limits={"cpu": "300m", "memory": "1536Mi"})
+    resources = SimpleNamespace(limits={'cpu': '300m', 'memory': '1536Mi'})
-    container = SimpleNamespace(image="userbot:latest", resources=resources)
+    container = SimpleNamespace(image='userbot:latest', resources=resources)
     template_spec = SimpleNamespace(containers=[container], volumes=[])
     return SimpleNamespace(
         metadata=SimpleNamespace(
-            name="userbot-test-account",
+            name='userbot-test-account',
-            labels={"app.kubernetes.io/instance": "test-account"},
+            labels={'app.kubernetes.io/instance': 'test-account'},
             annotations={},
             creation_timestamp=datetime.now(UTC),
         ),
         spec=SimpleNamespace(
             replicas=replicas,
-            selector=SimpleNamespace(match_labels={"app": "test"}),
+            selector=SimpleNamespace(match_labels={'app': 'test'}),
             template=SimpleNamespace(spec=template_spec),
         ),
         status=SimpleNamespace(available_replicas=1 if replicas else 0),
@@ -180,13 +180,13 @@ def deployment(replicas: int = 1):
 
 
 @pytest.mark.parametrize(
-    ("replicas", "pod_value", "expected"),
+    ('replicas', 'pod_value', 'expected'),
     [
-        (0, None, "stopped"),
+        (0, None, 'stopped'),
-        (1, pod(ready=True), "running"),
+        (1, pod(ready=True), 'running'),
-        (1, pod(ready=False, phase="Pending"), "pending"),
+        (1, pod(ready=False, phase='Pending'), 'pending'),
-        (1, pod(ready=False, reason="CrashLoopBackOff"), "error"),
+        (1, pod(ready=False, reason='CrashLoopBackOff'), 'error'),
-        (1, pod(ready=False, phase="Failed"), "error"),
+        (1, pod(ready=False, phase='Failed'), 'error'),
     ],
 )
 def test_status_classification(replicas, pod_value, expected) -> None:
@@ -195,6 +195,6 @@ def test_status_classification(replicas, pod_value, expected) -> None:
     kube._pvc_storage = Mock(return_value=None)
     kube._pod_metrics = Mock(return_value=(None, None))
 
-    result = kube._summarize("userbot", deployment(replicas))
+    result = kube._summarize('userbot', deployment(replicas))
 
     assert result.status == expected

userbot/panel/backend/tests/test_models.py

@@ -6,34 +6,34 @@ from pydantic import ValidationError
 
 
 @pytest.mark.parametrize(
-    "instance_id",
+    'instance_id',
-    ["Upper", "has_space", "-leading", "trailing-", "x" * 41],
+    ['Upper', 'has_space', '-leading', 'trailing-', 'x' * 41],
 )
 def test_invalid_instance_ids(instance_id: str) -> None:
     with pytest.raises(ValidationError):
         AccountBase(
             instance_id=instance_id,
-            display_name="Test",
+            display_name='Test',
             api_id=1,
-            api_hash="0123456789abcdef",
+            api_hash='0123456789abcdef',
         )
 
 
 def test_delete_data_defaults_to_false() -> None:
-    request = DeleteRequest(confirmation="test")
+    request = DeleteRequest(confirmation='test')
     assert request.delete_data is False
 
 
 @pytest.mark.asyncio
 async def test_validation_response_does_not_echo_secret_input() -> None:
-    sensitive_value = "-".join(("very", "private", "string", "session"))
+    sensitive_value = '-'.join(('very', 'private', 'string', 'session'))
     error = RequestValidationError(
         [
             {
-                "type": "string_too_short",
+                'type': 'string_too_short',
-                "loc": ("body", "session_string"),
+                'loc': ('body', 'session_string'),
-                "msg": "String should have at least 32 characters",
+                'msg': 'String should have at least 32 characters',
-                "input": sensitive_value,
+                'input': sensitive_value,
             }
         ]
     )

userbot/panel/backend/tests/test_spa.py

@@ -6,43 +6,43 @@ from app.main import spa_fallback
 
 @pytest.fixture
 def static_dir(tmp_path: Path, monkeypatch: pytest.MonkeyPatch) -> Path:
-    static = tmp_path / "static"
+    static = tmp_path / 'static'
     static.mkdir()
-    (static / "index.html").write_text("<html>index</html>", encoding="utf-8")
+    (static / 'index.html').write_text('<html>index</html>', encoding='utf-8')
-    (static / "app.js").write_text("console.log('app')", encoding="utf-8")
+    (static / 'app.js').write_text("console.log('app')", encoding='utf-8')
-    secret = tmp_path / "secret.txt"
+    secret = tmp_path / 'secret.txt'
-    secret.write_text("TOP SECRET", encoding="utf-8")
+    secret.write_text('TOP SECRET', encoding='utf-8')
-    monkeypatch.setattr("app.main.static_dir", static)
+    monkeypatch.setattr('app.main.static_dir', static)
     return static
 
 
 def static_index(static_dir: Path) -> Path:
-    return static_dir / "index.html"
+    return static_dir / 'index.html'
 
 
 def test_returns_existing_file(static_dir: Path) -> None:
-    response = spa_fallback("app.js")
+    response = spa_fallback('app.js')
-    assert response.path == static_dir / "app.js"
+    assert response.path == static_dir / 'app.js'
 
 
 def test_unknown_path_falls_back_to_index(static_dir: Path) -> None:
-    response = spa_fallback("does/not/exist.js")
+    response = spa_fallback('does/not/exist.js')
     assert response.path == static_index(static_dir)
 
 
 def test_traversal_does_not_leak_outside_static(static_dir: Path) -> None:
-    response = spa_fallback("../secret.txt")
+    response = spa_fallback('../secret.txt')
     assert response.path == static_index(static_dir)
 
-    response = spa_fallback("%2e%2e/secret.txt")
+    response = spa_fallback('%2e%2e/secret.txt')
     assert response.path == static_index(static_dir)
 
 
 def test_symlink_outside_static_is_blocked(static_dir: Path, tmp_path: Path) -> None:
-    target = tmp_path / "outside.txt"
+    target = tmp_path / 'outside.txt'
-    target.write_text("secret", encoding="utf-8")
+    target.write_text('secret', encoding='utf-8')
-    link = static_dir / "leak.txt"
+    link = static_dir / 'leak.txt'
     link.symlink_to(target)
 
-    response = spa_fallback("leak.txt")
+    response = spa_fallback('leak.txt')
     assert response.path == static_index(static_dir)

userbot/panel/frontend/package.json

@@ -6,7 +6,8 @@
   "scripts": {
     "build": "vite build",
     "dev": "vite --host 0.0.0.0",
-    "test": "vitest run"
+    "test": "vitest run",
+    "check": "svelte-check --tsconfig ./tsconfig.json"
   },
   "dependencies": {
     "lucide-svelte": "^0.468.0",